terminfo.src

ncurses 库 可能有用酒用 没用就算了 我觉得还可以用

#	shift F1	\E[013q
#	control-F1	\E[025q
#
# In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
# \EOP to \EOS.  The shifted and control modifiers still do the same thing.
#
# The cursor keys also have different codes:
#	control-up	\E[162q
#	control-down	\E[165q
#	control-left	\E[159q
#	control-right	\E[168q
#
#	shift-up	\E[161q
#	shift-down	\E[164q
#	shift-left	\E[158q
#	shift-right	\E[167q
#
#	control-tab	\[072q
#
iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100), 
	am, 
	cols#80, it#8, lines#40, 
	bel=^G, bold=\E[1m, clear=\E[H\E[2J, 
	cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD, 
	cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, 
	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 
	cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h, 
	dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 
	home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED, 
	is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P, 
	kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q, 
	kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 
	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, 
	kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\E[010q, 
	kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q, 
	kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, 
	kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q, 
	knp=\E[154q, kpp=\E[150q, kprt=\E[209q, krmir=\E[146q, 
	kspd=\E[217q, nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\, 
	rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, 
	sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m, 
	tbc=\E[3g, 
iris-ansi-ap|IRIS ANSI in application-keypad mode, 
	is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q, 
	kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi, 

# From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
# (T.Dickey 98/1/24)
iris-color|xwsh|IRIX ANSI with color, 
	ncv#33, 
	csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m, 
	ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m, 
	rmul=\E[24m, rs1=\Ec, 
	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 
	sitm=\E[3m, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c, 
	use=klone+color, use=iris-ansi-ap, 

# The following is a version of the ibm-pc entry distributed with PC/IX,
# (Interactive Systems' System 3 for the Big Blue), modified by Richard
# McIntosh at UCB/CSM.  The :pt: and :uc: have been removed from the original,
# (the former is untrue, and the latter failed under UCB/man); standout and
# underline modes have been added.  Note: this entry describes the "native"
# capabilities of the PC monochrome display, without ANY emulation; most
# communications packages (but NOT PC/IX connect) do some kind of emulation.
pcix|PC/IX console, 
	am, bw, eo, 
	cols#80, lines#24, 
	clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C, 
	cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K, 
	home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, 
	smul=\E[4m, 

# (ibmpcx: this entry used to be known as ibmx.
# It formerly included the following extension capabilities:
#	:GC=b:GL=v:GR=t:RT=^J:\
#	:GH=\E[196g:GV=\E[179g:\
#	:GU=\E[193g:GD=\E[194g:\
#	:G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
#	:CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
#	:WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
# I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
# ":kh=\E[Y:".  Added IBM-PC forms characters and highlights, they match
# what was there before. -- esr)
ibmpcx|xenix|ibmx|IBM PC xenix console display, 
	OTbs, am, msgr, 
	cols#80, lines#25, 
	clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C, 
	cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 
	ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H, 
	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d, 
	kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e, 
	kpp=\E[Z, use=klone+acs, use=klone+sgr, 

#### QNX
#

# QNX 4.0 Console
# Michael's original version of this entry had <am@>, <smcup=\Ei>,
# <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
# right corner without triggering a scroll.  The ncurses terminfo library can
# handle this case with the <ich1> capability, and prefers <am> for better
# optimization.  Bug: The <op> capability resets attributes.
# From: Michael Hunter <[e-mail]> 30 Jul 1996
# (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
qnx|qnx4|qnx console, 
	daisy, km, mir, msgr, xhpa, xt, 
	colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8, 
	acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t\303u\264v\301w\302x\263, 
	bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ, 
	cnorm=\Ey1, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 
	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2, 
	dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee, 
	il1=\EE, ind=^J, kBEG=\377\356, kCAN=\377\263, 
	kCMD=\377\267, kCPY=\377\363, kCRT=\377\364, 
	kDL=\377\366, kEND=\377\301, kEOL=\377\311, 
	kEXT=\377\367, kFND=\377\370, kHLP=\377\371, 
	kHOM=\377\260, kIC=\377\340, kLFT=\377\264, 
	kMOV=\377\306, kMSG=\377\304, kNXT=\377\272, 
	kOPT=\377\372, kPRT=\377\275, kPRV=\377\262, 
	kRDO=\377\315, kRES=\377\374, kRIT=\377\266, 
	kRPL=\377\373, kSAV=\377\307, kSPD=\377\303, 
	kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0, 
	kclo=\377\343, kclr=\377\341, kcmd=\377\245, 
	kcpy=\377\265, kcrt=\377\305, kctab=\377\237, 
	kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246, 
	kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274, 
	ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320, 
	kext=\377\270, kf1=\377\201, kf10=\377\212, 
	kf11=\377\256, kf12=\377\257, kf13=\377\213, 
	kf14=\377\214, kf15=\377\215, kf16=\377\216, 
	kf17=\377\217, kf18=\377\220, kf19=\377\221, 
	kf2=\377\202, kf20=\377\222, kf21=\377\223, 
	kf22=\377\224, kf23=\377\333, kf24=\377\334, 
	kf25=\377\225, kf26=\377\226, kf27=\377\227, 
	kf28=\377\230, kf29=\377\231, kf3=\377\203, 
	kf30=\377\232, kf31=\377\233, kf32=\377\234, 
	kf33=\377\235, kf34=\377\236, kf35=\377\276, 
	kf36=\377\277, kf37=\377\321, kf38=\377\322, 
	kf39=\377\323, kf4=\377\204, kf40=\377\324, 
	kf41=\377\325, kf42=\377\326, kf43=\377\327, 
	kf44=\377\330, kf45=\377\331, kf46=\377\332, 
	kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206, 
	kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346, 
	khlp=\377\350, khome=\377\240, khts=\377\342, 
	kich1=\377\253, kil1=\377\273, kind=\377\261, 
	kmov=\377\351, kmrk=\377\355, kmsg=\377\345, 
	knp=\377\252, knxt=\377\312, kopn=\377\357, 
	kopt=\377\353, kpp=\377\242, kprt=\377\255, 
	kprv=\377\302, krdo=\377\336, kref=\377\354, 
	kres=\377\360, krfr=\377\347, kri=\377\271, 
	krmir=\377\313, krpl=\377\362, krst=\377\352, 
	ksav=\377\361, kslt=\377\247, kspd=\377\335, 
	ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER, 
	rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER, 
	rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d, 
	setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei, 
	smso=\E(, smul=\E[, 
#
#
qnxt|qnxt4|QNX4 terminal, 
	crxm, use=qnx4, 
#
qnxm|QNX4 with mouse events, 
	maddr#1, 
	chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h, 
	mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l, 
	mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l, 
	smicm=\E/>2h, use=qnx4, 
#
qnxw|QNX4 windows, 
	xvpa, use=qnxm, 
#
#	Monochrome QNX4 terminal or console. Setting this terminal type will
#	allow an application running on a color console to behave as if it
#	were a monochrome terminal. Output will be through stdout instead of
#	console writes because the term routines will recognize that the
#	terminal name starts with 'qnxt'.
#
qnxtmono|Monochrome QNX4 terminal or console, 
	colors@, pairs@, 
	scp@, use=qnx4, 

# From: Federico Bianchi <[e-mail]>, 1 Jul 1998
# (esr: commented out <scp> and <rmcup> to avoid warnings.)
# (TD: derive from original qnx4 entry)
qnxt2|qnx 2.15 serial terminal, 
	am, 
	civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@, 
	rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4, 

# QNX ANSI terminal definition
qansi-g|QNX ANSI, 
	am, eslok, hs, xon, 
	colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80, 
	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~Oa, 
	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 
	clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=^M, 
	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 
	cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 
	cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A, 
	cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 
	dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J, 
	el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l, 
	fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, 
	ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, 
	ind=\E[S, indn=\E[%p1%dS, invis=\E[9m, 
	is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0, 
	kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt, 
	kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h, 
	kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c, 
	kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa, 
	kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B, 
	kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y, 
	kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA, 
	kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt, 
	kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx, 
	kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~, 
	kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~, 
	kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~, 
	kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~, 
	kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~, 
	kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~, 
	kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU, 
	kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh, 
	khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a, 
	kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo, 
	kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg, 
	kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T, 
	ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m, 
	rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T, 
	rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m, 
	rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l, 
	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 
	setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 
	setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 
	sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;, 
	sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m, 
	smul=\E[4m, tbc=\E[2g, 
	tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH, 
#
qansi|QNX ansi with console writes, 
	daisy, xhpa, use=qansi-g, 
#
qansi-t|QNX ansi without console writes, 
	crxm, use=qansi, 
#
qansi-m|QNX ansi with mouse, 
	maddr#1, 
	chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h, 
	mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l, 
	mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l, 
	smicm=\E[>2h, use=qansi, 
#
qansi-w|QNX ansi for windows, 
	xvpa, use=qansi-m, 

#### NetBSD consoles
#
# pcvt termcap database entries (corresponding to release 3.31)
# Author's last edit-date: [Fri Sep 15 20:29:10 1995]
#
# (For the terminfo master file, I translated these into terminfo syntax.
# Then I dropped all the pseudo-HP entries. we don't want and can't use
# the :Xs: flag. Then I split :is: into a size-independent <is1> and a
# size-dependent <is2>.  Finally, I added <rmam>/<smam> -- esr)

# NOTE: <ich1> has been taken out of this entry. for reference, it should
# be <ich1=\E[@>.  For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
# (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
pcvtXX|pcvt vt200 emulator (DEC VT220), 
	am, km, mir, msgr, xenl, 
	it#8, vt#3, 
	acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~, 
	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 
	clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, 
	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
	cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 
	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 
	e