lpc2000_can_driver.c

飞利浦LPC2000系列CAN控制器驱动程序

   {
      
      // CAN Channel 1 
	  case 1:   Address_TFI_ID_DATA = (UInt32)&CAN1TFI1 + TXB_Offset;
	            Address_CMR = (UInt32)&CAN1CMR;
				Address_GSR = (UInt32)&CAN1GSR;
                break;

      // CAN Channel 2 
      case 2:   Address_TFI_ID_DATA = (UInt32)&CAN1TFI1 + 0x00004000 + TXB_Offset;
	            Address_CMR = (UInt32)&CAN1CMR + 0x00004000;
				Address_GSR = (UInt32)&CAN1GSR + 0x00004000;
                break;

      // CAN Channel 3 
      case 3:   Address_TFI_ID_DATA = (UInt32)&CAN1TFI1 + 0x00008000 + TXB_Offset;
				Address_CMR = (UInt32)&CAN1CMR + 0x00008000;
				Address_GSR = (UInt32)&CAN1GSR + 0x00008000;
                break;

      // CAN Channel 4 
      case 4:   Address_TFI_ID_DATA = (UInt32)&CAN1TFI1 + 0x0000C000 + TXB_Offset;
	            Address_CMR = (UInt32)&CAN1CMR + 0x0000C000;
				Address_GSR = (UInt32)&CAN1GSR + 0x0000C000;
                break;

      default:  // wrong channel number 
                return (LPC2000_CANDRIVER_ERR_WRONG_CAN_CHANNEL_NUMBER);

   }

   // Copy message contents into local variable(s) 

   OUTW( Address_TFI_ID_DATA + 0, pTransmitBuf -> TFI);
   OUTW( Address_TFI_ID_DATA + 4, pTransmitBuf -> ID);
   OUTW( Address_TFI_ID_DATA + 8, pTransmitBuf -> DataField[0]);
   OUTW( Address_TFI_ID_DATA +12, pTransmitBuf -> DataField[1]);

   OUTB( Address_CMR, Transmit_TxBuf_Start );

   while ( (INW(Address_GSR) & 0x0048) == 0x0000 );  // Wait Trans successed or error counter reach limit

   if( (INW(Address_GSR) & 0x0040) == 0x0040 ) 		 // if error, stop transmit
   {												 // for demo used, stop screen roll
   OUTB( Address_CMR, 0x02 );                        
	}												 

   return (LPC2000_CANDRIVER_OK);

}  // lpc2000CANdriver_PrepareTransmitMessage; 




// **************************************************************************
// FUNCTION:    lpc2000CANdriver_ReceiveMessageCh1                                
//                                                                           
// DESCRIPTION: This function reads the received CAN message and stores      
//              the data in the CPU User RAM                                 
//                                                                           
// GLOBAL VARIABLES USED:                                                    
//                                                                           
// PARAMETERS:                                                               
//                                                                           
// RETURN:      CanStatusCode: Status of operation                           
//                                                                           
//              LPC2000_CANDRIVER_OK - successful                                 
//                                                                           
// **************************************************************************

CanStatusCode
lpc2000CANdriver_ReceiveMessageCh1 (plpc2000CANdriver_RXObj_t   pReceiveBuf)
{

   // CAN Channel 1 

   pReceiveBuf -> RFS = CAN1RFS;
   pReceiveBuf -> ID = CAN1RID;

   pReceiveBuf -> DataField[0] = CAN1RDA;
   pReceiveBuf -> DataField[1] = CAN1RDB;

   // Release Receive Buffer 

   CAN1CMR = 0x04;                 // Release Rx Buffer


   return (1);
}   // lpc2000CANdriver_ReceiveMessageCh0; 



// **************************************************************************
// FUNCTION:    lpc2000CANdriver_ReceiveMessageCh2                                
//                                                                           
// DESCRIPTION: This function reads the received CAN message and stores      
//              the data in the CPU User RAM                                 
//                                                                           
// GLOBAL VARIABLES USED:                                                    
//                                                                           
// PARAMETERS:                                                               
//                                                                           
// RETURN:      CanStatusCode: Status of operation                           
//                                                                           
//              LPC2000_CANDRIVER_OK - successful                                 
//                                                                           
// **************************************************************************

CanStatusCode
lpc2000CANdriver_ReceiveMessageCh2 (plpc2000CANdriver_RXObj_t   pReceiveBuf)
{
   // CAN Channel 2 

   pReceiveBuf -> RFS = CAN2RFS;
   pReceiveBuf -> ID = CAN2RID;

   pReceiveBuf -> DataField[0] = CAN2RDA;
   pReceiveBuf -> DataField[1] = CAN2RDB;

   // Release Receive Buffer 

   CAN2CMR = 0x04;      // Release Rx Buffer


   return (1);
}   // lpc2000CANdriver_ReceiveMessageCh2; 

// **************************************************************************
// FUNCTION:    lpc2000CANdriver_ReceiveMessageCh3                                
//                                                                           
// DESCRIPTION: This function reads the received CAN message and stores      
//              the data in the CPU User RAM                                 
//                                                                           
// GLOBAL VARIABLES USED:                                                    
//                                                                           
// PARAMETERS:                                                               
//                                                                           
// RETURN:      CanStatusCode: Status of operation                           
//                                                                           
//              LPC2000_CANDRIVER_OK - successful                                 
//                                                                           
// **************************************************************************

CanStatusCode
lpc2000CANdriver_ReceiveMessageCh3 (plpc2000CANdriver_RXObj_t   pReceiveBuf)
{

   // CAN Channel 3 

   pReceiveBuf -> RFS = CAN3RFS;
   pReceiveBuf -> ID = CAN3RID;

   pReceiveBuf -> DataField[0] = CAN3RDA;
   pReceiveBuf -> DataField[1] = CAN3RDB;

   // Release Receive Buffer 

   CAN3CMR = 0x04;                 // Release Rx Buffer


   return (1);
}   // lpc2000CANdriver_ReceiveMessageCh3; 

// **************************************************************************
// FUNCTION:    lpc2000CANdriver_ReceiveMessageCh4                                
//                                                                           
// DESCRIPTION: This function reads the received CAN message and stores      
//              the data in the CPU User RAM                                 
//                                                                           
// GLOBAL VARIABLES USED:                                                    
//                                                                           
// PARAMETERS:                                                               
//                                                                           
// RETURN:      CanStatusCode: Status of operation                           
//                                                                           
//              LPC2000_CANDRIVER_OK - successful                                 
//                                                                           
// **************************************************************************

CanStatusCode
lpc2000CANdriver_ReceiveMessageCh4 (plpc2000CANdriver_RXObj_t   pReceiveBuf)
{

   // CAN Channel 4 

   pReceiveBuf -> RFS = CAN4RFS;
   pReceiveBuf -> ID = CAN4RID;

   pReceiveBuf -> DataField[0] = CAN4RDA;
   pReceiveBuf -> DataField[1] = CAN4RDB;

   // Release Receive Buffer 

   CAN4CMR = 0x04;          // Release Rx Buffer


   return (1);
}   // lpc2000CANdriver_ReceiveMessageCh4; 





// **************************************************************************
// FUNCTION:    lpc2000CANdriver_LoadAcceptanceFilter                             
//                                                                           
// DESCRIPTION: The function lpc2000hwCANdriver_LoadAcceptanceFilter configures   
//              the Acceptance Filter Memory. Filter constants which are     
//              pre-defined in the configuration file lpc2000CANdriver_cfg.h      
//              are used for programming.                                    
//              In addition to the filter memory configuration, this         
//              function also configures the acceptance filter start address 
//              registers according to the number of CAN identifiers.        
//                                                                           
// GLOBAL VARIABLES USED:                                                    
//                                                                           
// PARAMETERS:                                                               
//                                                                           
// RETURN:      CanStatusCode: Status of operation                           
//                                                                           
//              LPC2000_CANDRIVER_OK     - successful                             
//                                                                           
//              LPC2000_CANDRIVER_ERR    - not successful -> table error          
// **************************************************************************

CanStatusCode
lpc2000CANdriver_LoadAcceptanceFilter (void)
{
   UInt32 address;
   UInt32 memory_address;
   UInt32 IDcount;
   UInt32 i;
   UInt32 acfword_pre;
   UInt32 acfword_upper;
   UInt32 acfword_lower;


   address = 0;

   // Set Standard Frame Individual Startaddress 
   CANSFF_sa = address;

   // ----------------------------------------------------------
   // ----------   Fill Standard Individual Section ------------
   // ----------------------------------------------------------

   #ifdef LPC2000_CANDRIVER_STD_INDIVIDUAL

   IDcount = LPC2000_CANDRIVER_NUMBER_OF_STD_INDIVIDUAL_IDS;
   acfword_pre = 0;
   i = 0;

   while (IDcount != 0)
   {
      acfword_lower = (gklpc2000CANdriver_StdIndividualSection[i].ID << 16)
                    + (gklpc2000CANdriver_StdIndividualSection[i].Channel << 29);

     IDcount--;
      if (IDcount == 0)
      {
         // odd number of identifiers -> disable ID ! 
         acfword_upper = 0x00001FFF
                       + (gklpc2000CANdriver_StdIndividualSection[i].Channel << 13);
      }
      else
      {
         acfword_upper = (gklpc2000CANdriver_StdIndividualSection[i+1].ID)
                       + (gklpc2000CANdriver_StdIndividualSection[i+1].Channel << 13);
         IDcount--;
      }

      // Check ascending numerical order 
      if ((acfword_lower >> 16) >= acfword_upper)
      {
         // table error - violation of ascending numerical order 
         return(LPC2000_CANDRIVER_ERR_TABLE_ERROR_IN_STD_INDIVIDUAL_SECTION);
      }
      else
      {
         if (acfword_pre >= (acfword_lower >> 16))
         {
            // table error - violation of ascending numerical order 
            return(LPC2000_CANDRIVER_ERR_TABLE_ERROR_IN_STD_INDIVIDUAL_SECTION);
         }
         else
         {
            // write configuration into Acceptance Filter Memeory 
            OUTW( CAFMEM + address, acfword_lower + acfword_upper);
            acfword_pre = acfword_upper;
         }
      }

      // increment configuration table index 
      i = i + 2;
      // next Acceptance Filter Memory address 
      address = address + 4;
   };

   #endif

   // Set Standard Frame Group Startaddress 
   CANSFF_GRP_sa = address;

   // ----------------------------------------------------------
   // ----------   Fill Standard Group Section -----------------
   // ----------------------------------------------------------

   #ifdef LPC2000_CANDRIVER_STD_GROUP

   IDcount = LPC2000_CANDRIVER_NUMBER_OF_STD_GROUP_IDS;
   acfword_pre = 0;
   i = 0;

   while (IDcount != 0)
   {
      acfword_lower = (gklpc2000CANdriver_StdGroupSection[i].ID << 16)
                    + (gklpc2000CANdriver_StdGroupSection[i].Channel << 29);

      IDcount--;
      if (IDcount == 0)
      {