📄 sam9261.pin
字号:
-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
N.C. = No Connect. This pin has no internal connection to the device.
VCCINT = Dedicated power pin, which MUST be connected to VCC (3.3 volts).
VCCIO = Dedicated power pin, which MUST be connected to VCC (3.3 volts).
GND = Dedicated ground pin or unused dedicated input, which MUST be connected to GND.
GND* = These I/O pins can either be left unconnected or connected to GND. Connecting these pins to GND will improve the device's immunity to noise.
RESERVED = Unused I/O pin, which MUST be left unconnected.
----------------------------------------------------------------------------
CHIP "sam9261" ASSIGNED TO AN EPM7064AETC100-4
N.C. : 1
N.C. : 2
VCCIO : 3
TDI : 4
N.C. : 5
CFOE : 6
N.C. : 7
CFWE : 8
CFIOW : 9
BUF_CS : 10
GND : 11
BUF_DIR : 12
CF_CD1 : 13
CF_CE1 : 14
TMS : 15
CF_CE2 : 16
CF_A10 : 17
VCCIO : 18
CF_OE : 19
CF_IORD : 20
CF_A9 : 21
N.C. : 22
CF_IOWE : 23
N.C. : 24
CF_A8 : 25
GND : 26
N.C. : 27
N.C. : 28
GND* : 29
CF_A7 : 30
CF_IRQ : 31
CF_A6 : 32
CF_A5 : 33
VCCIO : 34
CF_A4 : 35
CF_NRST : 36
CF_A3 : 37
GND : 38
VCCINT : 39
CF_NWAIT : 40
CF_A2 : 41
CF_A1 : 42
GND : 43
CF_REG : 44
NRST : 45
CF_A0 : 46
CF_WP : 47
CF_CD2 : 48
N.C. : 49
N.C. : 50
VCCIO : 51
CF_WE : 52
N.C. : 53
GND* : 54
N.C. : 55
GND* : 56
GND* : 57
GND* : 58
GND : 59
GND* : 60
IRQ1 : 61
TCK : 62
IRQ2 : 63
PA31 : 64
PA30 : 65
VCCIO : 66
PA29 : 67
CFCE2 : 68
CFCE1 : 69
N.C. : 70
CFS1 : 71
N.C. : 72
TDO : 73
GND : 74
CFS0 : 75
A25_CFRNW : 76
N.C. : 77
N.C. : 78
NWAIT : 79
A22 : 80
A6 : 81
VCCIO : 82
A7 : 83
A8 : 84
A9 : 85
GND : 86
GND : 87
GND : 88
GND : 89
GND : 90
VCCINT : 91
A10 : 92
CFIOR : 93
A5 : 94
GND : 95
A4 : 96
A3 : 97
A2 : 98
A1 : 99
A0 : 100
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -