au1200fb.patch

patches for linux-2.6.

diff -Naur linux26-cvs/drivers/video/Kconfig linux26-new/drivers/video/Kconfig
--- linux26-cvs/drivers/video/Kconfig	2005-06-27 14:30:09.000000000 -0500
+++ linux26-new/drivers/video/Kconfig	2005-06-27 16:05:54.000000000 -0500
@@ -953,7 +953,11 @@
 
 config FB_AU1100
 	bool "Au1100 LCD Driver"
-	depends on FB && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y
+	depends on FB && MIPS && SOC_AU1100
+
+config FB_AU1200
+	bool "Au1200 LCD Driver"
+	depends on FB && MIPS && SOC_AU1200
 
 config FB_SBUS
 	bool "SBUS and UPA framebuffers"
diff -Naur linux26-cvs/drivers/video/Makefile linux26-new/drivers/video/Makefile
--- linux26-cvs/drivers/video/Makefile	2005-06-27 14:30:09.000000000 -0500
+++ linux26-new/drivers/video/Makefile	2005-06-27 16:05:54.000000000 -0500
@@ -96,7 +96,8 @@
 obj-$(CONFIG_FB_PMAGB_B)	  += pmagb-b-fb.o  cfbfillrect.o cfbcopyarea.o cfbimgblt.o
 obj-$(CONFIG_FB_MAXINE)		  += maxinefb.o  cfbfillrect.o cfbcopyarea.o cfbimgblt.o
 obj-$(CONFIG_FB_TX3912)		  += tx3912fb.o  cfbfillrect.o cfbcopyarea.o cfbimgblt.o
-obj-$(CONFIG_FB_AU1100)		  += au1100fb.o fbgen.o
+obj-$(CONFIG_FB_AU1100)		  += au1100fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
+obj-$(CONFIG_FB_AU1200)		  += au1200fb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
 
 
 # Platform or fallback drivers go here
diff -Naur linux26-cvs/drivers/video/au1200fb.c linux26-new/drivers/video/au1200fb.c
--- linux26-cvs/drivers/video/au1200fb.c	1969-12-31 18:00:00.000000000 -0600
+++ linux26-new/drivers/video/au1200fb.c	2005-07-27 16:23:29.000000000 -0500
@@ -0,0 +1,2026 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *	Au1200 LCD Driver.
+ *
+ * Copyright 2004-2005 AMD
+ * Author: AMD
+ *
+ * Based on:
+ * linux/drivers/video/skeletonfb.c -- Skeleton for a frame buffer device
+ *  Created 28 Dec 1997 by Geert Uytterhoeven
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ctype.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/mach-au1x00/au1000.h>
+#include "au1200fb.h"
+
+#ifdef CONFIG_PM
+#include <asm/mach-au1x00/au1xxx_pm.h>
+#endif
+
+#ifndef CONFIG_FB_AU1200_DEVS
+#define CONFIG_FB_AU1200_DEVS 4
+#endif
+
+#define DRIVER_NAME "au1200fb"
+#define DRIVER_DESC "LCD controller driver for AU1200 processors"
+
+#define DEBUG 1
+
+#define print_err(f, arg...) printk(KERN_ERR DRIVER_NAME ": " f "\n", ## arg)
+#define print_warn(f, arg...) printk(KERN_WARNING DRIVER_NAME ": " f "\n", ## arg)
+#define print_info(f, arg...) printk(KERN_INFO DRIVER_NAME ": " f "\n", ## arg)
+
+#if DEBUG
+#define print_dbg(f, arg...) printk(KERN_DEBUG __FILE__ ": " f "\n", ## arg)
+#else
+#define print_dbg(f, arg...) do {} while (0)
+#endif
+
+
+#define AU1200_LCD_FB_IOCTL 0x46FF
+
+#define AU1200_LCD_SET_SCREEN 1
+#define AU1200_LCD_GET_SCREEN 2
+#define AU1200_LCD_SET_WINDOW 3
+#define AU1200_LCD_GET_WINDOW 4
+#define AU1200_LCD_SET_PANEL  5
+#define AU1200_LCD_GET_PANEL  6
+
+#define SCREEN_SIZE		    (1<< 1)
+#define SCREEN_BACKCOLOR    (1<< 2)
+#define SCREEN_BRIGHTNESS   (1<< 3)
+#define SCREEN_COLORKEY     (1<< 4)
+#define SCREEN_MASK         (1<< 5)
+typedef struct au1200_lcd_global_regs_t
+{
+    unsigned int flags;
+    unsigned int xsize;
+    unsigned int ysize;
+    unsigned int backcolor;
+    unsigned int brightness;
+	unsigned int colorkey;
+	unsigned int mask;
+    unsigned int panel_choice;
+    char panel_desc[80];
+
+} au1200_lcd_global_regs_t;
+
+#define WIN_POSITION            (1<< 0)
+#define WIN_ALPHA_COLOR         (1<< 1)
+#define WIN_ALPHA_MODE          (1<< 2)
+#define WIN_PRIORITY            (1<< 3)
+#define WIN_CHANNEL             (1<< 4)
+#define WIN_BUFFER_FORMAT       (1<< 5)
+#define WIN_COLOR_ORDER         (1<< 6)
+#define WIN_PIXEL_ORDER         (1<< 7)
+#define WIN_SIZE                (1<< 8)
+#define WIN_COLORKEY_MODE       (1<< 9)
+#define WIN_DOUBLE_BUFFER_MODE  (1<< 10)
+#define WIN_RAM_ARRAY_MODE      (1<< 11)
+#define WIN_BUFFER_SCALE        (1<< 12)
+#define WIN_ENABLE	            (1<< 13)
+
+typedef struct au1200_lcd_window_regs_t
+{
+    unsigned int flags;
+    unsigned int xpos;
+    unsigned int ypos;
+    unsigned int alpha_color;
+    unsigned int alpha_mode;
+    unsigned int priority;
+    unsigned int channel;
+    unsigned int buffer_format;
+    unsigned int color_order;
+    unsigned int pixel_order;
+    unsigned int xsize;
+    unsigned int ysize;
+    unsigned int colorkey_mode;
+    unsigned int double_buffer_mode;
+    unsigned int ram_array_mode;
+    unsigned int xscale;
+    unsigned int yscale;
+    unsigned int enable;
+} au1200_lcd_window_regs_t;
+
+
+typedef struct au1200_lcd_iodata_t
+{
+
+    unsigned int subcmd;
+    au1200_lcd_global_regs_t global;
+    au1200_lcd_window_regs_t window;
+
+} au1200_lcd_iodata_t;
+
+#if defined(__BIG_ENDIAN)
+#define LCD_CONTROL_DEFAULT_PO LCD_CONTROL_PO_11
+#else
+#define LCD_CONTROL_DEFAULT_PO LCD_CONTROL_PO_00
+#endif
+#define LCD_CONTROL_DEFAULT_SBPPF LCD_CONTROL_SBPPF_565
+
+/* Private, per-framebuffer management information (independent of the panel itself) */
+struct au1200fb_device {
+	struct fb_info fb_info;			/* FB driver info record */
+
+	int					plane;
+	unsigned char* 		fb_mem;		/* FrameBuffer memory map */
+	unsigned int		fb_len;
+	dma_addr_t    		fb_phys;
+};
+
+static struct au1200fb_device _au1200fb_devices[CONFIG_FB_AU1200_DEVS];
+/********************************************************************/
+
+/* LCD controller restrictions */
+#define AU1200_LCD_MAX_XRES	1280
+#define AU1200_LCD_MAX_YRES	1024
+#define AU1200_LCD_MAX_BPP	32
+#define AU1200_LCD_MAX_CLK	96000000 // FIX!!! this needs to go away ??? 
+#define AU1200_LCD_NBR_PALETTE_ENTRIES 256
+
+/* Default number of visible screen buffer to allocate */
+#define AU1200FB_NBR_VIDEO_BUFFERS 1
+
+/********************************************************************/
+
+AU1200_LCD *lcd = (AU1200_LCD *)AU1200_LCD_ADDR;
+static int window_index = 2; /* default is zero */
+static int panel_index = 2; /* default is zero */
+static struct window_settings *win;
+static struct panel_settings *panel;
+static int noblanking = 1;
+static int nohwcursor = 0;
+
+struct window_settings
+{
+	unsigned char name[64];
+	uint32 mode_backcolor;
+	uint32 mode_colorkey;
+	uint32 mode_colorkeymsk;
+	struct
+	{
+		int xres;
+		int yres;
+		int xpos;
+		int ypos;
+		uint32 mode_winctrl1; /* winctrl1[FRM,CCO,PO,PIPE] */
+		uint32 mode_winenable;
+	} w[4];
+};
+
+#if defined(__BIG_ENDIAN)
+#define LCD_WINCTRL1_PO_16BPP LCD_WINCTRL1_PO_00
+#else
+#define LCD_WINCTRL1_PO_16BPP LCD_WINCTRL1_PO_01
+#endif
+
+extern int board_au1200fb_panel_init (void);
+extern int board_au1200fb_panel_shutdown (void);
+
+#ifdef CONFIG_PM 
+int au1200fb_pm_callback(au1xxx_power_dev_t *dev, 
+		au1xxx_request_t request, void *data);
+au1xxx_power_dev_t *LCD_pm_dev;
+#endif
+
+#if defined(CONFIG_FOCUS_ENHANCEMENTS)
+extern int board_au1200fb_focus_init_hdtv(void);
+extern int board_au1200fb_focus_init_component(void);
+extern int board_au1200fb_focus_init_cvsv(void);
+extern int board_au1200fb_focus_shutdown(void);
+#endif
+
+/*
+ * Default window configurations
+ */
+static struct window_settings windows[] =
+{
+	{ /* Index 0 */
+		"0-FS gfx, 1-video, 2-ovly gfx, 3-ovly gfx",
+		/* mode_backcolor	*/ 0x006600ff,
+		/* mode_colorkey,msk*/ 0, 0,
+		{
+			{
+			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
+			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565|LCD_WINCTRL1_PO_16BPP,
+			/* mode_winenable*/ LCD_WINENABLE_WEN0,
+			},
+			{
+			/* xres, yres, xpos, ypos */ 100, 100, 100, 100,
+			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565|LCD_WINCTRL1_PO_16BPP|LCD_WINCTRL1_PIPE,
+			/* mode_winenable*/ LCD_WINENABLE_WEN1,
+			},
+			{
+			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
+			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565|LCD_WINCTRL1_PO_16BPP,
+			/* mode_winenable*/ 0,
+			},
+			{
+			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
+			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565|LCD_WINCTRL1_PO_16BPP|LCD_WINCTRL1_PIPE,
+			/* mode_winenable*/ 0,
+			},
+		},
+	},
+
+	{ /* Index 1 */
+		"0-FS gfx, 1-video, 2-ovly gfx, 3-ovly gfx",
+		/* mode_backcolor	*/ 0x006600ff,
+		/* mode_colorkey,msk*/ 0, 0,
+		{
+			{
+			/* xres, yres, xpos, ypos */ 320, 240, 5, 5,
+#if 0
+			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565|LCD_WINCTRL1_PO_16BPP,
+#endif
+			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_24BPP|LCD_WINCTRL1_PO_00,
+			/* mode_winenable*/ LCD_WINENABLE_WEN0,
+			},
+			{
+			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
+			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565|LCD_WINCTRL1_PO_16BPP,
+			/* mode_winenable*/ 0,
+			},
+			{
+			/* xres, yres, xpos, ypos */ 100, 100, 0, 0,
+			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565|LCD_WINCTRL1_PO_16BPP|LCD_WINCTRL1_PIPE,
+			/* mode_winenable*/ 0/*LCD_WINENABLE_WEN2*/,
+			},
+			{
+			/* xres, yres, xpos, ypos */ 200, 25, 0, 0,
+			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565|LCD_WINCTRL1_PO_16BPP|LCD_WINCTRL1_PIPE,
+			/* mode_winenable*/ 0,
+			},
+		},
+	},
+	{ /* Index 2 */
+		"0-FS gfx, 1-video, 2-ovly gfx, 3-ovly gfx",
+		/* mode_backcolor	*/ 0x006600ff,
+		/* mode_colorkey,msk*/ 0, 0,
+		{
+			{
+			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
+			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565|LCD_WINCTRL1_PO_16BPP,
+			/* mode_winenable*/ LCD_WINENABLE_WEN0,
+			},
+			{
+			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
+			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565|LCD_WINCTRL1_PO_16BPP,
+			/* mode_winenable*/ 0,
+			},
+			{
+			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
+			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_32BPP|LCD_WINCTRL1_PO_00|LCD_WINCTRL1_PIPE,
+			/* mode_winenable*/ 0/*LCD_WINENABLE_WEN2*/,
+			},
+			{
+			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
+			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565|LCD_WINCTRL1_PO_16BPP|LCD_WINCTRL1_PIPE,
+			/* mode_winenable*/ 0,
+			},
+		},
+	},
+	/* Need VGA 640 @ 24bpp, @ 32bpp */
+	/* Need VGA 800 @ 24bpp, @ 32bpp */
+	/* Need VGA 1024 @ 24bpp, @ 32bpp */
+} ;
+
+/*
+ * Controller configurations for various panels.
+ */
+//static struct panel_settings panels[] =
+
+
+struct panel_settings
+{
+	const char name[25];		/* Full name <vendor>_<model> */
+
+	struct 	fb_monspecs monspecs; 	/* FB monitor specs */
+
+	/* panel timings */
+	uint32 mode_screen;
+	uint32 mode_horztiming;
+	uint32 mode_verttiming;
+	uint32 mode_clkcontrol;
+	uint32 mode_pwmdiv;
+	uint32 mode_pwmhi;
+	uint32 mode_outmask;
+	uint32 mode_fifoctrl;
+	uint32 mode_toyclksrc;
+	uint32 mode_backlight;
+	uint32 mode_auxpll;
+	int (*device_init)(void);
+	int (*device_shutdown)(void);
+#define Xres min_xres // FIX!!! cheat
+#define Yres min_yres // FIX!!! cheat
+	u32	min_xres;		/* Minimum horizontal resolution */
+	u32	max_xres;		/* Maximum horizontal resolution */
+	u32 	min_yres;		/* Minimum vertical resolution */
+	u32 	max_yres;		/* Maximum vertical resolution */
+};
+
+/********************************************************************/
+// FIX!!! Maybe a modedb for the CRT ? otherwise panels should be as-is
+
+/* List of panels known to work with the AU1200 LCD controller.
+ * To add a new panel, enter the same specifications as the
+ * Generic_TFT one, and MAKE SURE that it doesn't conflicts 
+ * with the controller restrictions. Restrictions are:
+ *
+ * STN color panels: max_bpp <= 12
+ * STN mono panels: max_bpp <= 4
+ * TFT panels: max_bpp <= 16
+ * max_xres <= 800
+ * max_yres <= 600
+ */
+static struct panel_settings known_lcd_panels[] =
+{
+	[0] = { /* QVGA 320x240 H:33.3kHz V:110Hz */
+		.name = "QVGA_320x240",
+		.monspecs = {
+			.modedb = NULL,
+			.modedb_len = 0,
+			.hfmin = 30000, // FIX
+			.hfmax = 70000, // FIX
+			.vfmin = 60, // FIX
+			.vfmax = 60, // FIX
+			.dclkmin = 6000000, // FIX
+			.dclkmax = 28000000, // FIX
+			.input = FB_DISP_RGB,
+		},
+		.mode_screen		= LCD_SCREEN_SX_N(320) | LCD_SCREEN_SY_N(240),
+		.mode_horztiming	= 0x00c4623b,
+		.mode_verttiming	= 0x00502814,
+		.mode_clkcontrol	= 0x00020002, /* /4=24Mhz */
+		.mode_pwmdiv		= 0x00000000,
+		.mode_pwmhi		= 0x00000000,
+		.mode_outmask	= 0x00FFFFFF,
+		.mode_fifoctrl	= 0x2f2f2f2f,
+		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
+		.mode_backlight	= 0x00000000,
+		.mode_auxpll		= 8, /* 96MHz AUXPLL */
+		.device_init		= NULL,
+		.device_shutdown	= NULL,
+		320, 320,
+		240, 240,
+	},
+
+	[1] = { /* VGA 640x480 H:30.3kHz V:58Hz */
+		.name = "VGA_640x480",
+		.monspecs = {
+			.modedb = NULL,
+			.modedb_len = 0,
+			.hfmin = 30000, // FIX
+			.hfmax = 70000, // FIX
+			.vfmin = 60, // FIX
+			.vfmax = 60, // FIX
+			.dclkmin = 6000000, // FIX
+			.dclkmax = 28000000, // FIX
+			.input = FB_DISP_RGB,
+		},
+		.mode_screen		= 0x13f9df80,