readme.axis_2100

video motion detection of linux base

Using motion with the Axis 2100 network camera

First compile the motion binary as described in README and INSTALL
Then edit motion.conf: Add your axis cameras ip address to the netcam_url
paramter in the "Captute Device Options" section.

 To increase the performance use this urls :

 # for multipart jpeg
 http://192.168.1.10/axis-cgi/mjpg/video.cgi?showlength=1
 
 or

 # for single jpeg
 http://192.168.1.10/axis-cgi/jpg/image.cgi?showlength=1

There are only two valid picture sizes for the axis camera: 320x240 and 640x480

TODO:

	- Make the IP changeable at run-time.