changelog

RTEMS (Real-Time Executive for Multiprocessor Systems) is a free open source real-time operating sys

2006-04-24	Jiri Gaisler <[e-mail]>
		Edvin Catovic <[e-mail]>


	PR bsps/972
	* network/Makefile.am: Added Gaisler Research NIC driver.
	* network/greth.c, network/greth.h: New files.

2005-10-05  Jiri Gaisler <[e-mail]>
            Edvin Catovic <[e-mail]>
            Konrad Eisele <[e-mail]>

	PR 827/bsps
	* network/Makefile.am, network/open_eth.c, network/open_eth.h: Portion
	of large update of SPARC BSPs. Includes addition of sis, leon2 and
	leon3 BSPs, deletion of leon BSP, addition of SMC91111 NIC driver and
	much more.
	* network/README.smc91111, network/smc91111.c, network/smc91111.h,
	network/smc91111config.h, network/smc91111exp.h: New files.

2005-04-28      Jennifer Averett <[e-mail]>

        PR 781/misc
        * serial/ns16550_p.h: Fix baud rate calculation

2004-11-22	Joel Sherrill <[e-mail]>

	PR 693/misc
	* rtc/mc146818a_ioreg.c: Disable unless on a target with in/outport
	routines.

2004-11-10	Richard Campbell <[e-mail]>

	* network/dec21140.c: Cleanup a bit and remove message about not
	supported on PowerPC since it works on the MVME2100 BSP.

2004-11-10	Joel Sherrill <[e-mail]>

	PR 715/bsps
	* rtc/mc146818a.c: Delete include of bsp.h

2004-10-13      Eric Norum <[e-mail]>

        PR 688/bsps
        * rtc/rtc.h, rtc/mc146818a.c, rtc/mc146818a.h, rtc/mc146818a_ioreg.c: 
        New files.  Add libchip driver for MC146818A (and several
        Dallas Semiconductor) TOD chips.

2004-10-13      Eric Norum <[e-mail]>

        PR 686/networking
        * network/if_fxp.c: Fix lockup in if_fxp.c, add additional device code.

2004-04-09	Greg Menke <[e-mail]>

	PR 607/networking
	* network/dec21140.c: Made PCI configuration minimum sane instead
	of fully specifying unused PCI features.

2004-05-21  Till Strauman <[e-mail]>

	PR 625/networking
	* network/dec21140.c: Prevent name clashes by making 'ld_le32()' etc.
	static inlines.  Let dec21140 attach routine return an error rather
	than panic if no chip is detected (thus allowing for probing).
	* network/elnk.c: Let elnk bail out if autoneg never completes
	instead of looping forever.  Avoid divide by zero (crashed my PC).
	* network/if_fxp.c: Enable more fxp chip variants but warn that
	they are UNTESTED.

2003-09-26	Cedric Aubert <[e-mail]>

	PR 499/rtems_misc
	* serial/mc68681.c:  Miscellaneous corrections:
	    - Correction of ACR_BIT[7] (Baudrate table) Configuration
	    - Correction of Parity Bit Configuration (Odd was forced)
	    - Correction of Stop Bit configuration (inversed)
	    - Correction of ISR Handler to call 
  	      rtems_termios_dequeue_character() only if is a Tx Empty IRQ.
	    - Add RTS CTS Hardware flow control Configuration

2003-09-04	Joel Sherrill <[e-mail]>

	* ide/ata.c, ide/ata.h, ide/ata_internal.h, ide/ide_controller.c,
	ide/ide_ctrl.h, ide/ide_ctrl_cfg.h, ide/ide_ctrl_io.h,
	network/cs8900.c, network/cs8900.c.bsp, network/cs8900.h,
	network/dec21140.c, network/elnk.c, network/open_eth.c,
	network/sonic.c, network/sonic.h, rtc/icm7170.c, rtc/icm7170.h,
	rtc/icm7170_reg.c, rtc/icm7170_reg2.c, rtc/icm7170_reg4.c,
	rtc/icm7170_reg8.c, rtc/m48t08.c, rtc/m48t08.h, rtc/m48t08_reg.c,
	rtc/m48t08_reg2.c, rtc/m48t08_reg4.c, rtc/m48t08_reg8.c, rtc/rtc.h,
	rtc/rtcprobe.c, serial/mc68681.c, serial/mc68681.h,
	serial/mc68681_p.h, serial/mc68681_reg.c, serial/mc68681_reg2.c,
	serial/mc68681_reg4.c, serial/mc68681_reg8.c, serial/serial.h,
	serial/z85c30.c, serial/z85c30.h, serial/z85c30_p.h,
	serial/z85c30_reg.c: URL for license changed.

2003-09-04	Joel Sherrill <[e-mail]>

	* network/cs8900.c: Removed incorrect statement about copyright
	assignment.

2003-09-03	Jiri Gaisler <[e-mail]>

	PR 477/networking
	* network/Makefile.am: Add driver for OpenCores NIC.
	* network/README.open_eth, network/open_eth.c, network/open_eth.h:
	New files.

2003-08-21	Ralf Corsepius <[e-mail]>

	* ide/Makefile.am: Don't include @RTEMS_BSP@.cfg.

2003-08-11	Ralf Corsepius <[e-mail]>

	* configure.ac: Use [e-mail] as bug report email address.

2003-07-18      Greg Menke <[e-mail]>

	PR 429/bsps
	PR 432/bsps
	* network/elnk.c: Due to a bug in the driver, if multiple packets
	are queued onto an elnk board, the ISR will deadlock the device with
	a tx complete interrupt.  Lighter tx loads are not affected as they
	end up submitting single packets to the device.

2003-06-30	Greg Menke <[e-mail]>

	* network/dec21140.c, network/elnk.c: Update to compile on i386.

2003-06-13	Greg Menke <[e-mail]>

	* network/README.3com: New file missed in previous commit.

2003-06-13	Greg Menke <[e-mail]>

	PR 405/bsps
	PR 393/networking
	* network/dec21140.c: Fix leak also known as PR393.
	* network/elnk.c, network/if_media.h, network/mii.h: New files.
	* network/Makefile.am: Reflect new files.

2003-04-15	Joel Sherrill <[e-mail]>

	PR 387/rtems_misc
	* ide/ata.c: Removed warning and moved to use of simpler libc routines.
	* ide/ata_internal.h: Added missing newline and end of file.

2003-03-27	Joel Sherrill <[e-mail]>

	* ide/Makefile.am: ATA code depends upon libchip/ide which is not
	allowed in the cpukit source code since it must be buildable
	independent of any BSP. These files were moved to libchip/ide.
	* ide/ata.c, ide/ata.h, ide/ata_internal.h: New files.

2003-03-25	Thomas Doerfler <[e-mail]>

	PR 368/filesystems
	* ide/Makefile.am, ide/ide_ctrl_cfg.h: General improvements which
	now work on pc386 and mbx8xx.
	* ide/ide_controller.c: New file.

2003-03-06	Ralf Corsepius <[e-mail]>

	* configure.ac: Remove AC_CONFIG_AUX_DIR.

2003-02-20	Till Straumann <[e-mail]>

	PR 354/networking
	* network/if_fxp.c (Intel eepro network driver): re-enabled the chip
	against a table of supported chips. The untested
	ones are still commented out, however.

2003-02-11	Ralf Corsepius <[e-mail]>

	* configure.ac: AM_INIT_AUTOMAKE([1.7.2]).

2003-02-11	Ralf Corsepius <[e-mail]>

	* configure.ac: AC_PREREQ(2.57).

2002-12-11	Ralf Corsepius <[e-mail]>

	* network/Makefile.am: Eliminate C_O_FILES.
	* rtc/Makefile.am: Ditto.
	* serial/Makefile.am: Ditto,

2002-12-10	Ralf Corsepius <[e-mail]>

	* serial/Makefile.am: Don't include @RTEMS_BSP@.cfg.
	Don't use LIBC_DEFINES.
	* rtc/Makefile.am: Don't include @RTEMS_BSP@.cfg.
	Don't use LIBC_DEFINES.
	* network/Makefile.am: Don't include @RTEMS_BSP@.cfg.
	Don't use LIBC_DEFINES.

2002-11-13	Jay Monkman <[e-mail]>

	* network/cs8900.c: I don't know why we have to SelfST register
	twice on the EDB7312, but it doesn't work on the EDB7312 if we don't. 

2002-10-31	Joel Sherrill <[e-mail]>

	* network/dec21140.c: Removed warnings.

2002-10-28	Eugeny S. Mints <[e-mail]>

	* New files: New directory ide/, ide/Makefile.am, ide/ide_ctrl_cfg.h,
	ide/ide_ctrl_io.h, ide/ide_ctrl.h:
	* configure.ac, Makefile.am: Modified to reflect changes above.

2002-10-21	Ralf Corsepius <[e-mail]>

	* .cvsignore: Reformat.
	Add autom4te*cache.
	Remove autom4te.cache.

2002-09-14	Joel Sherrill <[e-mail]>

	* serial/z85c30.c: Eliminated warning by clarifying statement.

2002-09-07	Chris Johns <[e-mail]>

	* network/Makefile.am, network/README.cs8900, network/cs8900.c,
	network/cs8900.h: Significant update which corrects the problem 
	where the cs8900.c file was actually the BSP glue.  Joel did
	some hacking so this file will compile.  Previously it required
	providing a target.h file to compile.
	* network/cs8900.c.bsp: New file.

2002-08-11	Ralf Corsepius <[e-mail]>

	* network/Makefile.am: Use .$(OBJEXT) instead of .o.
 	* rtc/Makefile.am: Use .$(OBJEXT) instead of .o.
 	* serial/Makefile.am: Use .$(OBJEXT) instead of .o.

2002-08-10	Ralf Corsepius <[e-mail]>

	* serial/Makefile.am: Don't tmp-install lib.
	* rtc/Makefile.am: Don't tmp-install lib.

2002-07-16	Eric Norum <[e-mail]>

	* New driver for the Intel EtherExpressPro (82559ER) chip.
	* network/if_fxp.c, network/if_fxpreg.h, network/if_fxpvar.h,
	network/pci.h: New file.
	* network/Makefile.am: Modified to reflect above.

2001-05-14	Till Straumann <[e-mail]>

	* bootloader/Makefile.am, console/Makefile.am, pci/Makefile.am:
	Per PR215 address the following issues:
	    - _IO_BASE, _ISA_MEM_BASE and PCI_DRAM_OFFSET
	      are no longer defined by libcpu (powerpc/shared/include/io.h)
	      but by the BSP (who is the only one to know the values)
	    - the affected BSP (shared/motorola) headers have been fixed
	      in a separate "libbsp/powerpc/shared" patch.
	    - the DEC 21140 driver (libchip/network/dec21140.c) has been
	      fixed to use PCI_DRAM_OFFSET instead of PREP_PCI_DRAM_OFFSET.
	      and PCI_MEM_BASE instead of PREP_ISA_MEM_BASE. PCI_MEM_BASE
	      is to be defined by the BSP who is using this driver.
	    - the DEC driver also has been fixed to use the newer
	      rtems_bsp_delay_in_bus_cycles() instead of the obsolete
	      delay_in_bus_cycles().

2002-05-07	Chris Johns <[e-mail]>

	* c/src/libchip/network/i82586.c: Per PR210, adjust the mbuf
	lengths to remove the ethernet header as the FreeBSD (RTEMS)
	stack requires it to be stripped.

2002-04-18	Ralf Corsepius <[e-mail]>

	* network/dec21140.c: Reflect changes to powerpc's
	rtems/score/cpu.h. Use __PPC__ for gcc-3.x compliance.

2002-04-11	Chris Johns <[e-mail]>

	* network/rtems_bsdnet.h: To address PR59, added the drv_ctrl driver
	control block field to the ifconfig network driver structure. This
	field is needed by the i82586 driver which was ported from NetBSD
	as it had better hardware abstraction.

2002-04-04	Ralf Corsepius <[e-mail]>

	* network/i82586.c: Include <string.h>.
	* network/sonic.c: Ditto.

2002-04-01	Ralf Corsepius <[e-mail]>

	* configure.ac: AC_DEFINE(CPU_U32_FIX) for sparc.

2002-03-27	Ralf Corsepius <[e-mail]>

	* configure.ac:
	AC_INIT(package,_RTEMS_VERSION,_RTEMS_BUGS).
	AM_INIT_AUTOMAKE([no-define foreign 1.6]).
	* network/Makefile.am: Remove AUTOMAKE_OPTIONS.
	* Makefile.am: Remove AUTOMAKE_OPTIONS.
	* rtc/Makefile.am: Remove AUTOMAKE_OPTIONS.
	* serial/Makefile.am: Remove AUTOMAKE_OPTIONS.

2002-01-03	Ralf Corsepius <[e-mail]>

	* network/cs8900.c: Include rtems/bspIo.h instead of bspIo.h.

2001-11-26	Ralf Corsepius <[e-mail]>

	* network/sonic.h: Fix typo.

2001-10-12	Joel Sherrill <[e-mail]>

	* serial/z85c30.c: Fixed typo.

2001-10-11	Ralf Corsepius <[e-mail]>

	* .cvsignore: Add autom4te.cache for autoconf > 2.52.
	* configure.in: Remove.
	* configure.ac: New file, generated from configure.in by autoupdate.

2001-09-28	Ralf Corsepius <[e-mail]>

	* rtc/Makefile.am: Use 'PREINSTALL_FILES ='.
	* network/Makefile.am: Use 'PREINSTALL_FILES ='.
	* serial/Makefile.am: Use 'PREINSTALL_FILES ='.

2001-09-27	Joel Sherrill <[e-mail]>

	* ChangeLog: Fixed typo in date.

2001-09-21	Joel Sherrill <[e-mail]>

	* network/Makefile.am: Fixed typo on file name.
	* network/i82586.c: Commented out line 318 which is referencing 
	a member of a structure that is not currently there.  This
	needs to be worked out with Chris Johns <[e-mail]>.
	Switched C++ style comments to C style.

2001-09-19	Chris Johns <[e-mail]>

	* network/README.i82586, network/i82586.c, network/i82586reg.h,
	network/i82586var.h: New files.  Network driver for Intel
	i82586.

2001-04-27	Ralf Corsepius <[e-mail]>

	* configure.in: Add [-ansi -fasm] to RTEMS_PROG_CC_FOR_TARGET.

2001-03-14	Joel Sherrill <[e-mail]>

	* serial/Makefile.am, serial/mc68681.c, serial/ns16550.c,
	serial/serprobe.c, serial/z85c30.c: Now install sersupp.h
	to <libchip/sersupp.h> so libchip style serial drivers can
	be written in libcpu or libbsp.

2001-03-01	Joel Sherrill <[e-mail]>

	* network/cs8900.c, network/cs8900.h, network/sonic.c, network/sonic.h,
	rtc/icm7170_reg.c, rtc/icm7170_reg2.c, rtc/icm7170_reg4.c,
	rtc/icm7170_reg8.c, rtc/m48t08_reg.c, rtc/m48t08_reg2.c,
	rtc/m48t08_reg4.c, rtc/m48t08_reg8.c, serial/mc68681_reg.c,
	serial/mc68681_reg2.c, serial/mc68681_reg4.c, serial/mc68681_reg8.c,
	serial/z85c30.c, serial/z85c30.h, serial/z85c30_p.h,
	serial/z85c30_reg.c: Corrected header.

2001-02-03	Ralf Corsepius <[e-mail]>

	* network/Makefile.am, rtc/Makefile.am, serial/Makefile.am: 
	Apply include_*HEADERS instead of H_FILES, replace ${..} with $(..). 

2000-11-13	Jiri Gaisler <[e-mail]>

	* network/sonic.c: Added ipalign() routine to align the
	received packet so that the ip header is on a 32-bit boundary.
	Necessary for cpu's that do not allow unaligned loads and stores
	and when the 32-bit DMA mode is used.

2000-11-09	Ralf Corsepius <[e-mail]>

	* Makefile.am: Use ... instead of RTEMS_TOPdir in ACLOCAL_AMFLAGS.

2000-11-03	Chris Johns <[e-mail]>

	* network/README.cs8900, network/cs8900.c, network/cs8900.h: New files.

2000-11-02	Ralf Corsepius <[e-mail]>

	* Makefile.am: Switch to ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal.

2000-10-25	Ralf Corsepius <[e-mail]>

	* Makefile.am: ACLOCAL_AMFLAGS= -I $(RTEMS_TOPdir)/macros.
	Switch to GNU canonicalization.

2000-10-20	Joel Sherrill <[e-mail]>

	* network/dec21140.c: Corrected attach to include "int attach"
	parameter.

2000-09-05	Ralf Corsepius <[e-mail]>

	* network/Makefile.am: Use AM_*FLAGS += .. .
	* ChangeLog: Fix formating.

2000-09-04	Ralf Corsepius <[e-mail]>

	* network/Makefile.am, rtc/Makefile.am, serial/Makefile.am:
	Include compile.am.

2000-08-10	Joel Sherrill <[e-mail]>

	* ChangeLog: New file.