makefile.in

RTEMS (Real-Time Executive for Multiprocessor Systems) is a free open source real-time operating sys

	  $(rtems_bspDATA_INSTALL) $$d$$p $(DESTDIR)$(rtems_bspdir)/$$f; \
	done

uninstall-rtems_bspDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(rtems_bsp_DATA)'; for p in $$list; do \
	  f="`echo $$p | sed -e 's|^.*/||'`"; \
	  echo " rm -f $(DESTDIR)$(rtems_bspdir)/$$f"; \
	  rm -f $(DESTDIR)$(rtems_bspdir)/$$f; \
	done
rtems_bsp_makeDATA_INSTALL = $(INSTALL_DATA)
install-rtems_bsp_makeDATA: $(rtems_bsp_make_DATA)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(rtems_bsp_makedir)
	@list='$(rtems_bsp_make_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f="`echo $$p | sed -e 's|^.*/||'`"; \
	  echo " $(rtems_bsp_makeDATA_INSTALL) $$d$$p $(DESTDIR)$(rtems_bsp_makedir)/$$f"; \
	  $(rtems_bsp_makeDATA_INSTALL) $$d$$p $(DESTDIR)$(rtems_bsp_makedir)/$$f; \
	done

uninstall-rtems_bsp_makeDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(rtems_bsp_make_DATA)'; for p in $$list; do \
	  f="`echo $$p | sed -e 's|^.*/||'`"; \
	  echo " rm -f $(DESTDIR)$(rtems_bsp_makedir)/$$f"; \
	  rm -f $(DESTDIR)$(rtems_bsp_makedir)/$$f; \
	done
rtems_makeDATA_INSTALL = $(INSTALL_DATA)
install-rtems_makeDATA: $(rtems_make_DATA)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(rtems_makedir)
	@list='$(rtems_make_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f="`echo $$p | sed -e 's|^.*/||'`"; \
	  echo " $(rtems_makeDATA_INSTALL) $$d$$p $(DESTDIR)$(rtems_makedir)/$$f"; \
	  $(rtems_makeDATA_INSTALL) $$d$$p $(DESTDIR)$(rtems_makedir)/$$f; \
	done

uninstall-rtems_makeDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(rtems_make_DATA)'; for p in $$list; do \
	  f="`echo $$p | sed -e 's|^.*/||'`"; \
	  echo " rm -f $(DESTDIR)$(rtems_makedir)/$$f"; \
	  rm -f $(DESTDIR)$(rtems_makedir)/$$f; \
	done
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:

DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

top_distdir = .
distdir = $(PACKAGE)-$(VERSION)

am__remove_distdir = \
  { test ! -d $(distdir) \
    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
         && rm -fr $(distdir); }; }

GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print

distdir: $(DISTFILES)
	$(am__remove_distdir)
	mkdir $(distdir)
	$(mkinstalldirs) $(distdir)/. $(distdir)/../../.. $(distdir)/./../../../automake $(distdir)/compilers
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkinstalldirs) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r $(distdir)
dist-gzip: distdir
	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)

dist dist-all: distdir
	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	$(am__remove_distdir)
	GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
	chmod -R a-w $(distdir); chmod a+w $(distdir)
	mkdir $(distdir)/=build
	mkdir $(distdir)/=inst
	chmod a-w $(distdir)
	dc_install_base=`$(am__cd) $(distdir)/=inst && pwd` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && cd $(distdir)/=build \
	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && $(mkinstalldirs) "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \
	  && rm -f $(distdir).tar.gz \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
	$(am__remove_distdir)
	@echo "$(distdir).tar.gz is ready for distribution" | \
	  sed 'h;s/./=/g;p;x;p;x'
distuninstallcheck:
	cd $(distuninstallcheck_dir) \
	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
check: check-am
all-am: Makefile $(DATA)

installdirs:
	$(mkinstalldirs) $(DESTDIR)$(rtems_make_compilersdir) $(DESTDIR)$(rtems_bspdir) $(DESTDIR)$(rtems_bsp_makedir) $(DESTDIR)$(rtems_makedir)

install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic mostlyclean-am

distclean: distclean-am
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

info: info-am

info-am:

install-data-am: install-dist_rtems_make_compilersDATA \
	install-rtems_bspDATA install-rtems_bsp_makeDATA \
	install-rtems_makeDATA

install-exec-am:

install-info: install-info-am

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf autom4te.cache
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-dist_rtems_make_compilersDATA uninstall-info-am \
	uninstall-rtems_bspDATA uninstall-rtems_bsp_makeDATA \
	uninstall-rtems_makeDATA

.PHONY: all all-am check check-am clean clean-generic dist dist-all \
	dist-gzip distcheck distclean distclean-generic distcleancheck \
	distdir distuninstallcheck dvi dvi-am info info-am install \
	install-am install-data install-data-am \
	install-dist_rtems_make_compilersDATA install-exec \
	install-exec-am install-info install-info-am install-man \
	install-rtems_bspDATA install-rtems_bsp_makeDATA \
	install-rtems_makeDATA install-strip installcheck \
	installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
	pdf-am ps ps-am uninstall uninstall-am \
	uninstall-dist_rtems_make_compilersDATA uninstall-info-am \
	uninstall-rtems_bspDATA uninstall-rtems_bsp_makeDATA \
	uninstall-rtems_makeDATA


@MAINTAINER_MODE_TRUE@$(srcdir)/host.cfg.in: $(top_srcdir)/@RTEMS_TOPdir@/make/host.cfg.in
@MAINTAINER_MODE_TRUE@	cp $< $@

debug:
	@echo
	@echo "\"make debug\" is obsolete, instead use:"
	@echo "	make VARIANT=DEBUG"
	@echo

.PHONY: debug

profile:
	@echo
	@echo "\"make profile\" is obsolete, instead use:"
	@echo "	make VARIANT=PROFILE"
	@echo

.PHONY: profile

preinstall-am: $(PREINSTALL_FILES)
preinstall: preinstall-am
.PHONY: preinstall preinstall-am

depend-am: depend-gcc
depend: depend-am
.PHONY: depend depend-am depend-gcc
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: