changelog

RTEMS (Real-Time Executive for Multiprocessor Systems) is a free open source real-time operating sys

2005-09-12	Thomas Doerfler <[e-mail]>

	PR 527/bsps
	PR 822/bsps
	* mpc8xx/clock/clock.c: Currently the MBX8xx BSP does not boot,
	because some logical errors are in the startup code. Additionally,
	the mpc8xx shared clock driver does not support the clocking scheme
	of some of the board variants, which are clocked from a
	32768Hz (!) external crystal.

2005-08-12	Phil Torre <[e-mail]>

	PR 816/bsps
	* mpc8xx/include/mpc8xx.h: The struct which describes SCC Ethernet mode
	parameters (m8xxSCCENparms_t) does not match the hardware: members
	taddr_h and taddr_l are transposed. When loading new multicast group
	addresses into the hash table, the wrong hash bit is set.

2004-11-22	Jennifer Averett <[e-mail]>

	PR 581/bsps
	* mpc6xx/exceptions/raw_exception.c, shared/include/cpuIdent.h:
	Converting PSIM to new exception model required addition of PSIM CPU
	model.

2004-11-10	Richard Campbell <[e-mail]>

	* configure.ac, mpc6xx/exceptions/raw_exception.c,
	mpc6xx/exceptions/raw_exception.h, mpc6xx/mmu/bat.c,
	mpc6xx/mmu/bat.h, mpc6xx/mmu/mmuAsm.S, shared/include/cpuIdent.c,
	shared/include/cpuIdent.h: Add MPC8240 and MPC8245 support. There was
	also a significant amount of spelling and whitespace cleanup.

2004-05-22	Till Strauman <[e-mail]>

	PR 619/bsps
	* mpc6xx/clock/c_clock.c: The PPC decrementer must be reloaded on each
	clock tick. Currently, this is done by just reloading a fixed value.
	The attached patch takes into account the time that elapsed since the
	decrementer crossed zero in order to adjust the value to be
	re-loaded. Without the patch, the effective system clock cycle is
	increased by the exception handler latency.

2003-09-04	Joel Sherrill <[e-mail]>

	* mpc6xx/clock/c_clock.c, mpc6xx/clock/c_clock.h,
	mpc6xx/exceptions/raw_exception.c, mpc6xx/exceptions/raw_exception.h,
	mpc6xx/mmu/bat.c, mpc6xx/mmu/bat.h, mpc6xx/mmu/mmuAsm.S,
	mpc6xx/timer/timer.c, mpc8260/clock/clock.c,
	mpc8260/console-generic/console-generic.c, mpc8260/cpm/brg.c,
	mpc8260/exceptions/raw_exception.c,
	mpc8260/exceptions/raw_exception.h, mpc8260/include/cpm.h,
	mpc8260/include/mmu.h, mpc8260/mmu/mmu.c, mpc8260/timer/timer.c,
	mpc8xx/clock/clock.c, mpc8xx/console-generic/console-generic.c,
	mpc8xx/exceptions/raw_exception.c, mpc8xx/exceptions/raw_exception.h,
	mpc8xx/include/cpm.h, mpc8xx/include/mmu.h, mpc8xx/mmu/mmu.c,
	mpc8xx/timer/timer.c, ppc403/clock/clock.c,
	ppc403/console/console.c.polled, ppc403/timer/timer.c,
	rtems/powerpc/debugmod.h, shared/include/byteorder.h,
	shared/include/cpuIdent.c, shared/include/cpuIdent.h,
	shared/include/io.h, shared/include/mmu.h, shared/include/page.h,
	shared/include/pgtable.h, shared/include/spr.h: URL for license
	changed.

2003-09-04	Joel Sherrill <[e-mail]>

	* mpc505/timer/timer.c, mpc8260/clock/clock.c,
	ppc403/console/console.c, ppc403/console/console405.c: Removed
	incorrect statement about copyright assignment.

2003-08-11	Ralf Corsepius <[e-mail]>

	* configure.ac: Use [e-mail] as bug report email address.

2003-07-08	Joel Sherrill <[e-mail]>

	PR 416/bsps
	* ppc403/ictrl/ictrl.c (ictrl_isr): We acknolwegde the interrupt in
	interrupt controller (clr_exisr(mask)) before calling the interrupt
	handler that will acnowledge the interrupt source. This results in
	the interrupt beeing seen a second time by the interrupt controller.
	Reported and fixed by El Kolli Yacine <[e-mail]>.

2003-03-25	Thomas Doerfler <[e-mail]>

	PR 368/filesystems
	* mpc8xx/include/mpc8xx.h: Add PCMCIA registers.

2003-03-25	Till Straumann <[e-mail]>

	PR 349/bsps
	* shared/include/cpuIdent.c: Readd PPC604r CPU.

2003-03-06	Ralf Corsepius <[e-mail]>

	* configure.ac: Remove AC_CONFIG_AUX_DIR.

2003-02-20	Till Straumann <[e-mail]>

	PR 349/bsps
	* mpc6xx/exceptions/raw_exception.c, mpc6xx/mmu/bat.c,
	mpc6xx/mmu/pte121.c, shared/include/cpuIdent.c,
	shared/include/cpuIdent.h, shared/src/Makefile.am, shared/src/stack.c,
	shared/src/stackTrace.h, powerpc/registers.h:
	  - undo improper 'fix' who broke mpc604r identification
	  - fix: 7400 identification PVR value was wrong
	  - enhance 'setdbat()' to switch OFF a given BAT if called with 0 size
	  - fix: page table support bugfix
	  - enhancement: provide routines to take and print stack trace
	    snapshots
	  - add definitions for HID1 and DABR SPRs

2003-02-14	Greg Menke <[e-mail]>

	PR 348/bsps
	* mpc6xx/exceptions/raw_exception.c: Add PPC_603ev as required
	by MTX603e BSP.

2003-02-11	Ralf Corsepius <[e-mail]>

	* configure.ac: AM_INIT_AUTOMAKE([1.7.2]).

2003-02-11	Ralf Corsepius <[e-mail]>

	* configure.ac: AC_PREREQ(2.57).

2002-12-19	Ralf Corsepius <[e-mail]>

	* configure.ac: Remove RTEMS_CHEC_CUSTOM_BSP.
	* mpc505/ictrl/Makefile.am: Don't include @RTEMS_BSP@.cfg.
	* mpc505/timer/Makefile.am: Don't include @RTEMS_BSP@.cfg.
	* mpc505/vectors/Makefile.am: Don't include @RTEMS_BSP@.cfg.
	* mpc6xx/clock/Makefile.am: Don't include @RTEMS_BSP@.cfg.
	* mpc6xx/exceptions/Makefile.am: Don't include @RTEMS_BSP@.cfg.
	* mpc6xx/mmu/Makefile.am: Don't include @RTEMS_BSP@.cfg.
	* mpc6xx/timer/Makefile.am: Don't include @RTEMS_BSP@.cfg.
	* mpc6xx/wrapup/Makefile.am: Don't include @RTEMS_BSP@.cfg.
	* mpc8260/clock/Makefile.am: Don't include @RTEMS_BSP@.cfg.
	* mpc8260/console-generic/Makefile.am: Don't include @RTEMS_BSP@.cfg.
	* mpc8260/cpm/Makefile.am: Don't include @RTEMS_BSP@.cfg.
	* mpc8260/exceptions/Makefile.am: Don't include @RTEMS_BSP@.cfg.
	* mpc8260/mmu/Makefile.am: Don't include @RTEMS_BSP@.cfg.
	* mpc8260/timer/Makefile.am: Don't include @RTEMS_BSP@.cfg.
	* mpc8xx/clock/Makefile.am: Don't include @RTEMS_BSP@.cfg.
	* mpc8xx/console-generic/Makefile.am: Don't include @RTEMS_BSP@.cfg.
	* mpc8xx/cpm/Makefile.am: Don't include @RTEMS_BSP@.cfg.
	* mpc8xx/exceptions/Makefile.am: Don't include @RTEMS_BSP@.cfg.
	* mpc8xx/mmu/Makefile.am: Don't include @RTEMS_BSP@.cfg.
	* mpc8xx/timer/Makefile.am: Don't include @RTEMS_BSP@.cfg.
	* ppc403/clock/Makefile.am: Don't include @RTEMS_BSP@.cfg.
	* ppc403/console/Makefile.am: Don't include @RTEMS_BSP@.cfg.
	* ppc403/ictrl/Makefile.am: Don't include @RTEMS_BSP@.cfg.
	* ppc403/timer/Makefile.am: Don't include @RTEMS_BSP@.cfg.
	* ppc403/tty_drv/Makefile.am: Don't include @RTEMS_BSP@.cfg.
	* ppc403/vectors/Makefile.am: Don't include @RTEMS_BSP@.cfg.
	* shared/include/Makefile.am: Don't include @RTEMS_BSP@.cfg.
	* shared/src/Makefile.am: Don't include @RTEMS_BSP@.cfg.
	* wrapup/Makefile.am: Don't include @RTEMS_BSP@.cfg.

2002-12-06	Ralf Corsepius <[e-mail]>

	* configure.ac: Remove RTEMS_CHECK_BSP_CACHE.

2002-12-02	Ralf Corsepius <[e-mail]>

	* mpc8260/Makefile.am: Merge-in mpc8260/include/Makefile.am.
	* mpc8xx/Makefile.am: Merge-in mpc8xx/include/Makefile.am.
	* mpc8260/include/Makefile.am: Remove.
	* mpc8xx/include/Makefile.am: Remove.
	* configure.ac: Remove mpc8260/include/Makefile.
	Remove mpc8xx/include/Makefile.

2002-12-01	Ralf Corsepius <[e-mail]>

	* configure.ac: Add RTEMS_PROG_CCAS.

2002-11-04	Joel Sherrill <[e-mail]>

	* mpc8260/console-generic/console-generic.c, mpc8260/cpm/dpram.c,
	mpc8260/exceptions/raw_exception.c,
	mpc8xx/exceptions/raw_exception.c: Removed warnings.

2002-11-01	Joel Sherrill <[e-mail]>

	* mpc8xx/console-generic/console-generic.c, mpc8xx/cpm/dpram.c,
	mpc8xx/exceptions/raw_exception.c, ppc403/clock/clock.c: 
	Removed warnings.

2002-10-31	Joel Sherrill <[e-mail]>

	* mpc6xx/clock/c_clock.c, mpc6xx/exceptions/raw_exception.c,
	mpc6xx/mmu/bat.c: Removed warnings.

2002-10-21	Ralf Corsepius <[e-mail]>

	* .cvsignore: Reformat.
	Add autom4te*cache.
	Remove autom4te.cache.

2002-09-08	Ralf Corsepius <[e-mail]>

	* configure.ac: Remove duplicate mpc6xx/timer/Makefile from CONFIG_FILES.

2002-09-02	Ralf Corsepius <[e-mail]>

	* mpc8260/exceptions/raw_exception.c: #include <string.h>.
	#include <bspIo.h>.

2002-08-11	Ralf Corsepius <[e-mail]>

	* mpc6xx/wrapup/Makefile.am: Use .$(OBJEXT) instead of .o.
 	* wrapup/Makefile.am: Use .$(OBJEXT) instead of .o.

2002-08-11	Ralf Corsepius <[e-mail]>

	* mpc505/ictrl/Makefile.am: Use .$(OBJEXT) instead of .o.
 	* mpc505/timer/Makefile.am: Use .$(OBJEXT) instead of .o.
 	* mpc505/vectors/Makefile.am: Use .$(OBJEXT) instead of .o.
 	* mpc6xx/clock/Makefile.am: Use .$(OBJEXT) instead of .o.
 	* mpc6xx/exceptions/Makefile.am: Use .$(OBJEXT) instead of .o.
 	* mpc6xx/mmu/Makefile.am: Use .$(OBJEXT) instead of .o.
 	* mpc6xx/timer/Makefile.am: Use .$(OBJEXT) instead of .o.
 	* mpc8260/clock/Makefile.am: Use .$(OBJEXT) instead of .o.
 	* mpc8260/console-generic/Makefile.am: Use .$(OBJEXT) instead of .o.
 	* mpc8260/cpm/Makefile.am: Use .$(OBJEXT) instead of .o.
 	* mpc8260/exceptions/Makefile.am: Use .$(OBJEXT) instead of .o.
 	* mpc8260/mmu/Makefile.am: Use .$(OBJEXT) instead of .o.
 	* mpc8260/timer/Makefile.am: Use .$(OBJEXT) instead of .o.
 	* mpc8xx/clock/Makefile.am: Use .$(OBJEXT) instead of .o.
 	* mpc8xx/console-generic/Makefile.am: Use .$(OBJEXT) instead of .o.
 	* mpc8xx/cpm/Makefile.am: Use .$(OBJEXT) instead of .o.
 	* mpc8xx/exceptions/Makefile.am: Use .$(OBJEXT) instead of .o.
 	* mpc8xx/mmu/Makefile.am: Use .$(OBJEXT) instead of .o.
 	* mpc8xx/timer/Makefile.am: Use .$(OBJEXT) instead of .o.
 	* ppc403/clock/Makefile.am: Use .$(OBJEXT) instead of .o.
 	* ppc403/console/Makefile.am: Use .$(OBJEXT) instead of .o.
 	* ppc403/ictrl/Makefile.am: Use .$(OBJEXT) instead of .o.
 	* ppc403/timer/Makefile.am: Use .$(OBJEXT) instead of .o.
 	* ppc403/tty_drv/Makefile.am: Use .$(OBJEXT) instead of .o.
 	* ppc403/vectors/Makefile.am: Use .$(OBJEXT) instead of .o.
 	* shared/include/Makefile.am: Use .$(OBJEXT) instead of .o.
 	* shared/src/Makefile.am: Use .$(OBJEXT) instead of .o.

2002-07-24	Ralf Corsepius <[e-mail]>

	* mpc6xx/mmu/pte121.c: Include <string.h> for gcc-3.1.

2002-07-22	Till Straumann <[e-mail]>

	* mpc6xx/mmu/bat.c: Per PR241, fix a tiny bug introduced by the
	fix for an earlier patch (PR213) which added support for setting
	BAT0 to setdbat().

2001-05-17	Joel Sherrill <[e-mail]>

	* mpc6xx/exceptions/raw_exception.c, pc6xx/mmu/pte121.c: Modified
	slightly to reflect recent PowerPC re-organization and avoid warnings.