📄 setvec.c
字号:
/* set_vector * * This routine installs an interrupt vector on the SPARC simulator. * * INPUT PARAMETERS: * handler - interrupt handler entry point * vector - vector number * type - 0 indicates raw hardware connect * 1 indicates RTEMS interrupt connect * * OUTPUT PARAMETERS: NONE * * RETURNS: * address of previous interrupt handler * * COPYRIGHT (c) 1989-1998. * On-Line Applications Research Corporation (OAR). * * The license and distribution terms for this file may be * found in the file LICENSE in this distribution or at * http://www.rtems.com/license/LICENSE. * * Ported to LEON implementation of the SPARC by On-Line Applications * Research Corporation (OAR) under contract to the European Space * Agency (ESA). * * LEON modifications of respective RTEMS file: COPYRIGHT (c) 1995. * European Space Agency. * * $Id: setvec.c,v 1.1.2.1 2005/10/05 19:25:45 joel Exp $ */#include <bsp.h>rtems_isr_entry set_vector( /* returns old vector */ rtems_isr_entry handler, /* isr routine */ rtems_vector_number vector, /* vector number */ int type /* RTEMS or RAW intr */){ rtems_isr_entry previous_isr; unsigned32 real_trap; unsigned32 source; if ( type ) rtems_interrupt_catch( handler, vector, &previous_isr ); else _CPU_ISR_install_raw_handler( vector, handler, (void *)&previous_isr ); real_trap = SPARC_REAL_TRAP_NUMBER( vector ); if ( LEON_INT_TRAP( real_trap ) ) { source = LEON_TRAP_SOURCE( real_trap ); LEON_Clear_interrupt( source ); LEON_Unmask_interrupt( source ); } return previous_isr;}/* LEON specific power-down function */void _CPU_Thread_Idle_body( void ){ while (1) { LEON_REG.Power_Down = LEON_REG.Power_Down; /* make sure on load follows store to power-down reg */ }}
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -