changelog

RTEMS (Real-Time Executive for Multiprocessor Systems) is a free open source real-time operating sys

	AM_INIT_AUTOMAKE([no-define foreign 1.6]).
	* 3c509/Makefile.am: Remove AUTOMAKE_OPTIONS.
	* Makefile.am: Remove AUTOMAKE_OPTIONS.
	* clock/Makefile.am: Remove AUTOMAKE_OPTIONS.
	* console/Makefile.am: Remove AUTOMAKE_OPTIONS.
	* include/Makefile.am: Remove AUTOMAKE_OPTIONS.
	* ne2000/Makefile.am: Remove AUTOMAKE_OPTIONS.
	* start/Makefile.am: Remove AUTOMAKE_OPTIONS.
	* startup/Makefile.am: Remove AUTOMAKE_OPTIONS.
	* timer/Makefile.am: Remove AUTOMAKE_OPTIONS.
	* wd8003/Makefile.am: Remove AUTOMAKE_OPTIONS.
	* wrapup/Makefile.am: Remove AUTOMAKE_OPTIONS.

2002-03-16	Ralf Corsepius <[e-mail]>

	* PR139
	* configure.ac: Remove stray ';', breaks building with automake-1.6.

2002-01-03	Ralf Corsepius <[e-mail]>

	* include/bsp.h: Include rtems/bspIo.h instead of bspIo.h.

2001-12-22	Ralf Corsepius <[e-mail]>

	* bsp_specs: Replace -lrtemsall with -lrtemsbsp -lrtemscpu,
	replace -lrtemsall_g with -lrtemsbsp_g -lrtemscpu_g.

2001-11-30	Ralf Corsepius <[e-mail]>

	* configure.ac: Introduce RTEMS_BSP_CONFIGURE.

2001-10-12	Joel Sherrill <[e-mail]>

	* console/inch.c: Fixed typo.

2001-10-11	Ralf Corsepius <[e-mail]>

	* .cvsignore: Add autom4te.cache for autoconf > 2.52.
	* configure.in: Remove.
	* configure.ac: New file, generated from configure.in by autoupdate.

2001-09-27	Joel Sherrill <[e-mail]>

	* include/bsp.h: Renamed delay() to rtems_bsp_delay().

2001-09-27	Ralf Corsepius <[e-mail]>

	* include/Makefile.am: Use 'CLEANFILES ='.
	* include/Makefile.am: Use 'PREINSTALL_FILES ='.
	* console/Makefile.am: Use 'PREINSTALL_FILES ='.
	* Makefile.am: Use 'TMPINSTALL_FILES ='.

2001-06-19	Ralf Corsepius <[e-mail]>

	* console/Makefile.am: Remove RTEMS_H_FILES.
	* start/start16.S: include <bspopts.h> to get NEW_GAS.

2001-06-19	Ralf Corsepius <[e-mail]>

	* configure.in: Add bspopts.h.
	* include/.cvsignore: Add bspopts.h*, stamp-h*.
	* include/Makefile.am: Use *_HEADERS instead of *H_FILES.
	* 3c509/Makefile.am: Dito.
	* console/Makefile.am: Dito.
	* include/bsp.h: Include bspopts.h.

2001-05-10	Ralf Corsepius	<[e-mail]>

	* configure.in: Use RTEMS_PROG_CC_FOR_TARGET([-ansi -fasm]).

2001-04-29	Ralf Corsepius <[e-mail]>

	* ne2000/ne2000.c: Remove #define __INSIDE_RTEMS_BSD_TCPIP_STACK__.

2001-01-05	Joel Sherrill <[e-mail]>

	* console/vt.c: Added include of <rtems.h> so _CPU_ISR_disable 
	would be visible.

2000-12-05	 Eric Valette <[e-mail]>

	* console/inch.c, console/keyboard.c, console/pc_keyb.c,
	console/vt.c, include/bsp.h: Correct incorrect interrupt level
	handling in new keyboard management code.  Correct
	BSP_poll_char initialization routine.
	* start/start.S, startup/bspstart.c: Correct when the video is
	initialized.
	* timer/timer.c (Calibrate_1ms_loop): Address problem where this
	did not work correctly on all PC speeds. The new calibrate routine
	has been tested on Pentium 166, pentium II 200, pentium III
	300 Mhz and does work as expected.

2000-12-05	Joel Sherrill <[e-mail]>

	* pc386/console/console.c, pc386/console/serial_mouse.c,
	pc386/console/vgainit.c, shared/comm/tty_drv.c: Remove warnings.

2000-11-09	Ralf Corsepius <[e-mail]>

	* Makefile.am: Use ... instead of RTEMS_TOPdir in ACLOCAL_AMFLAGS.

2000-11-02	Ralf Corsepius <[e-mail]>

	* Makefile.am: Switch to ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal.

2000-11-01	Joel Sherrill <[e-mail]>

	* startup/bspstart.c: assoc.h, error.h, libio_.h, libio.h,
	and libcsupport.h moved from libc to lib/include/rtems and
	now must be referenced as <rtems/XXX.h>.   Header file order
	was cleaned up while doing this.

2000-10-29	Joel Sherrill <[e-mail]>

	* startup/sbrk.c: Removed.  Redundant with shared version.

2000-10-27	Ralf Corsepius <[e-mail]>

	* configure.in, Makefile.am: ACLOCAL_AMFLAGS= -I $(RTEMS_TOPdir)/macros.
        Switch to GNU canonicalization.

2000-10-23	Joel Sherrill <[e-mail]>

	* console/serial_mouse.c: Fixed typos introduced by removal of CR/LF.

2000-10-20	Rosimildo da Silva <[e-mail]>

	* console/serial_mouse.c: Added support for changing serial parameters.

2000-10-20	Joel Sherrill <[e-mail]>

	* include/wd80x3.h: Added file header and logic to prevent multiple
	inclusions of this file.
	* wd8003/wd8003.c: Corrected attach to include "int attach" parameter.

2000-10-20	Joel Sherrill <[e-mail]>

	* include/bsp.h: Cleaned up network driver name and attach defines.

2000-10-20	Dmitry Kargapolov <[e-mail]>

	* ne2000/ne2000.c: Fix some errors in the driver.  
	1. There was no sufficient check of data in ethernet header.
	The code in ne_rx_daemon() was:
            inport_word (dport, len);
	    ...
	    len -= 4;
	      ...
	    if (len > 0)
	      ne_read_data (sc, startaddr, len, p);
	Unfortunately, sometimes my NIC gave me too big len value,
	the result was memory override.  To fix this, I added ethernet
	header data checking.

	2. The way overrides were serviced was not good.  It was complex
	but sometimes did not provide reliable continuing of NIC working.
	I had the situation of an endless loop in ne_check_status()
	after override processing.

	3. There was conceptual error of porting.  The old method of
	overrides curing was ported from the OS-s, where override-processing
	did start immediately.  But RTEMS-version uses events, and cleaning
	of the overrides can start later.

	I selected the way of ne2000 programming that is used
	in freebsd kernel (v4.0).

	Because of both problems, incorrect data in header of raw packet
	and receiver override, it went through ne_reset() and fully
	reset the ne2000.

	So, in summary
	- added detecting of the incorrect data in ethernet header;
	- replaced handling of receiver overrides with new scheme,
	via resetting of NIC, this method is used also in case of
	invalid header detecting.

2000-10-18	 Charles-Antoine Gauthier <[e-mail]>

	* console/console.c, console/serial_mouse.c, include/bsp.h:
	Add the ability to set parity, number of data bits and
	number of stop bits to the existing i386 serial drivers.

2000-10-17	Joel Sherrill <[e-mail]>

	* startup/Makefile.am: Added idt.c since it has been moved libcpu/i386
	to libbsp/i386/shared/irq.

2000-09-29	Charles-Antoine Gauthier <[e-mail]>

	* startup/linkcmds: Added lines so DWARF debug information
	would be available.  Otherwise gdb complains that the offsets
	for the debug info are incorrect and doesn't load the files.

2000-09-11      Ralf Corsepius <[e-mail]>

	* start/Makefile.am: Remove AM_CPPFLAGS and GAS_CODE16 conditional.

2000-09-04	Ralf Corsepius <[e-mail]>

	* 3c509/Makefile.am, clock/Makefile.am, console/Makefile.am,
	ne2000/Makefile.am, start/Makefile.am, startup/Makefile.am,
	timer/Makefile.am, wd8003/Makefile.am, wrapup/Makefile.am: Include
	compile.am

2000-08-30	Joel Sherrill <[e-mail]>

	* console/keyboard.h: Changed numerous routines from extern inline
	to static inline.

2000-08-26  Rosimildo da Silva  <[e-mail]>

	* Major rework of the "/dev/console" driver. 
	* Added termios support for stdin ( keyboard ). 
	* Added ioctls() to support modes similar to Linux( XLATE,
	RAW, MEDIUMRAW ).
	* Added Keyboard mapping and handling of the keyboard's leds.
	* Added Micro FrameBuffer driver ( "/dev/fb0" ) for bare VGA 
	controller ( 16 colors ). 
	* Added PS/2 and Serial mouse support for PC386 BSP. 
	* console/defkeymap.c: New file.
	* console/fb_vga.c: New file.
	* console/fb_vga.h: New file.
	* console/i386kbd.h: New file.
	* console/kd.h: New file.
	* console/keyboard.c: New file.
	* console/keyboard.h: New file.
	* console/mouse_parser.c: New file.
	* console/mouse_parser.h: New file.
	* console/pc_keyb.c: New file.
	* console/ps2_drv.h: New file.
	* console/ps2_mouse.c: New file.
	* console/ps2_mouse.h: New file.
	* console/serial_mouse.c: New file.
	* console/serial_mouse.h: New file.
	* console/vgainit.c: New file.
	* console/vt.c: New file.
	* console/Makefile.am: Reflect new files.
	* console/console.c, console/inch.c, console/outch.c: Console
	functionality modifications.
	* startup/Makefile.am: Pick up tty_drv.c and gdb_glue.c

2000-08-10	Joel Sherrill <[e-mail]>

	* ChangeLog: New file.