readme.mtx603e

RTEMS (Real-Time Executive for Multiprocessor Systems) is a free open source real-time operating sys

#
#  README.mtx603e,v 1.1 2002/11/6 1:00:00 gregm Exp
#

BSP NAME:           mtx603e
BOARD:              MTX-60X boards from motorola
BUS:                PCI, W83C554
CPU FAMILY:         ppc
CPU:                PowerPC 603e
COPROCESSORS:       N/A
MODE:               32 bit mode

DEBUG MONITOR:      PPCBUG mode 

PERIPHERALS
===========
TIMERS:             PPC internal Timebase register
  RESOLUTION:         ???
SERIAL PORTS:       simulated via bug
REAL-TIME CLOCK:    PPC internal Decrementer register
DMA:                none
VIDEO:              none
SCSI:               none
NETWORKING:         DEC21140

DRIVER INFORMATION
==================
CLOCK DRIVER:       PPC internal
IOSUPP DRIVER:      N/A
SHMSUPP:            N/A
TIMER DRIVER:       PPC internal
TTY DRIVER:         PPC internal

STDIO
=====
PORT:               Console port 0
ELECTRICAL:         na
BAUD:               na
BITS PER CHARACTER: na
PARITY:             na
STOP BITS:          na

Notes
=====

This bsp is an instantiation of the generic motorola_powerpc BSP.  It is
"virtual" in the sense it does not supply any per-bsp files.  Instead,
it is defined by the aclocal and make/custom config files which supply
#defines that adapt the shared powerpc code.  This is seen in the
bootloader and irq setup files.

Although created for a MTX-603e board, this bsp should be readily
portable to any of the Motorola MTX boards, and has in fact run on a
MCP750 board.

Some MTX boards have multiple processors, at this time RTEMS does not
support SMP and there is no internal awareness of the architecture.