📄 dmv170.h
字号:
/* dmv170.h * * This include file contains information pertaining to the DMV170. * * NOTE: Other than where absolutely required, this version currently * supports only the peripherals and bits used by the basic board * support package. This includes at least significant pieces of * the following items: * * + UART Channels A and B * * COPYRIGHT (c) 1989-1997. * On-Line Applications Research Corporation (OAR). * * The license and distribution terms for this file may in * the file LICENSE in this distribution or at * http://www.rtems.com/license/LICENSE. * * $Id: dmv170.h,v 1.15.4.1 2003/09/04 18:44:59 joel Exp $ */ #ifndef _INCLUDE_DMV170_h#define _INCLUDE_DMV170_h/* * DY-4 uses a non-standard clock for the Exar 88681. */#undef MC68681_BAUD_RATE_MASK_9600#define MC68681_BAUD_RATE_MASK_9600#define DMV17x_MC68681_BAUD_RATE_MASK_9600#if 0#define MC68681_OFFSET_MULTIPLIER 8#endif#ifdef __cplusplusextern "C" {#endif/* Note: Move address defs to the linker files. XXX *//* Real Time Clock Base Address */#define DMV170_RTC_ADDRESS 0xf2c00000/* base address of the DUART (68681) */#define MC68681_ADDR 0xf2800000#define MC68681_PORT1_ADDR 0xf2800000#define MC68681_PORT2_ADDR 0xf2800040/* * SONIC Information */#define DMV170_SONIC_ADDR 0xf3000000#define SONIC_BASE_ADDRESS DMV170_SONIC_ADDR#define SONIC_VECTOR DMV170_ETHERNET_IRQ/* base address for the SCC (85C30) */ #define Z85C30_ADDR 0xfb000010#define Z85C30_CTRL_A 0xfb000010#define Z85C30_DATA_A 0xfb000018#define Z85C30_CTRL_B 0xfb000000#define Z85C30_DATA_B 0xfb000008#define Z85C30_CLOCK_10 (10485760) /* 10 Mhz */#define Z85C30_CLOCK_2 (2581175) /* 2.4616 Mhz *//* base address for the SCV64 */#define DMV170_SCV64_BASE_ADDRESS 0xf2000000#define DMV170_LOCAL_CONTROL_STATUS_REG 0xf2400000#define DMV170_TIMER0_COUNT_INTERVAL_REG 0xf2400008#define DMV170_TIMER1_COUNT_INTERVAL_REG 0xf2400010#define DMV170_TIMER2_COUNT_INTERVAL_REG 0xf2400018#define DMV170_TIMER_CONTROL_REG 0xf2400020#define DMV170_CARD_RESORCE_REG 0xf2400040#define DMV170_WRITE( _reg, _data ) \ *((volatile rtems_unsigned16 *)(_reg)) = (_data)#define DMV170_READ( _reg, _data ) \ (_data) = *((volatile rtems_unsigned16 *)(_reg))/* * The following defines the bits in the DMA Control and Status Register *//* XXX fill in the other bits */#define DMV170_DMA_CONTROL_STATUS_REG 0xfc000090#define DMV170_SCC_10MHZ 0x00010000/* * The following defines the bits in the Local Control and Status Register. */#define DMV170_IPLx_MASK 0x0007#define DMV170_MAXPACK_SENSE_MASK 0x0008#define DMV170_MAXPACK_NOT_INSTALLED 0x0008#define DMV170_MAXPACK_INSTALLED 0x0000#define DMV170_MAXPACK_RESET_MASK 0x0010#define DMV170_MAXPACK_RESET_NEGATE 0x0010#define DMV170_MAXPACK_RESET_ASSERT 0x0000#define DMV170_EEPROM_READ_WRITE_MASK 0x0020#define DMV170_EEPROM_READ 0x0020#define DMV170_EEPROM_WRITE 0x0000#define DMV170_EEPROM_CLOCK_CTRL_MASK 0x0040#define DMV170_EEPROM_CLOCK_ASSERT 0x0040#define DMV170_EEPROM_CLOCK_NEGATE 0x0000#define DMV170_EEPROM_DATA_MASK 0x0080#define DMV170_EEPROM_DATA_HIGH 0x0080#define DMV170_EEPROM_DATA_LOW 0x0000/* Bits 8-10: 68040 Transfer Modifer Codes represent the Transfer * Modifier to be used on MAXPack Accesses. * * Bit 11 : 68040 Transfer Type (TT) 0:TT are both low 1:TT are both high */#define DMV170_USER_LINK0_STATUS_MASK 0x1000#define DMV170_USER_LINK0_OPEN 0x1000#define DMV170_USER_LINK0_INSTALLED 0x0000#define DMV170_LOWER_STATUS_LED_CONTROL_MASK 0x2000#define DMV170_LOWER_STATUS_LED_IS_OFF 0x2000#define DMV170_LOWER_STATUS_LED_IS_ON 0x0000#ifdef DMV176 /* The following are not available for the DMV171 */#define DMV170_RAM_TYPE_MASK 0x4000#define DMV170_RAM_TYPE_IS_DRAM 0x4000#define DMV170_RAM_TYPE_IS_SRAM 0x0000#define DMV170_IACK_VECTOR_AUTOVECTOR_MASK 0x8000#define DMV170_IACK_VECTOR_AUTOVECTOR_IS_VECTOR 0x8000#define DMV170_IACK_VECTOR_AUTOVECTOR_IS_NOT_VECTOR 0x0000#endif /* * The following defines the bits in the Timer Control Register. */#define DMV170_TIMER0_ENABLE_MASK 0x0001#define DMV170_TIMER0_IS_ENABLED 0x0001#define DMV170_TIMER0_IS_DISABLED 0x0000#define DMV170_TIMER1_ENABLE_MASK 0x0002#define DMV170_TIMER1_IS_ENABLED 0x0002#define DMV170_TIMER1_IS_DISABLED 0x0000#define DMV170_TIMER2_ENABLE_MASK 0x0004#define DMV170_TIMER2_IS_ENABLED 0x0004#define DMV170_TIMER2_IS_DISABLED 0x0000#define DMV170_TIMER1_CLOCK_MASK 0x0008#define DMV170_TIMER1_CLOCK_AT_TIMER0 0x0008#define DMV170_TIMER1_CLOCK_AT_1MHZ 0x0000#define DMV170_TIMER2_CLOCK_MASK 0x0010#define DMV170_TIMER2_CLOCK_AT_TIMER0 0x0010#define DMV170_TIMER2_CLOCK_AT_1MHZ 0x0000#define DMV170_TIMER0_INTERRUPT_MASK 0x0020#define DMV170_TIMER0_INTERRUPT_ENABLE 0x0020#define DMV170_TIMER0_INTERRUPT_CLEAR 0x0000#define DMV170_TIMER1_INTERRUPT_MASK 0x0040#define DMV170_TIMER1_INTERRUPT_ENABLE 0x0040#define DMV170_TIMER1_INTERRUPT_CLEAR 0x0000#define DMV170_TIMER2_INTERRUPT_MASK 0x0080#define DMV170_TIMER2_INTERRUPT_ENABLE 0x0080#define DMV170_TIMER2_INTERRUPT_CLEAR 0x0000/* * The Following define the bits for the Card Resource Register. */#define DMV170_DUART_INTERRUPT_MASK 0x0001 /* DUART Interrupt Sense Bit */#define DMV170_DUART_INTERRUPT_NEGATE 0x0001#define DMV170_DUART_INTERRUPT_ASSERT 0x0000#define DMV170_SONIC_INTERRUPT_MASK 0x0002 /* SONIC Interrupt Sense Bit */#define DMV170_SONIC_INTERRUPT_NEGATE 0x0002#define DMV170_SONIC_INTERRUPT_ASSERT 0x0000#define DMV170_SCSI_INTERRUPT_MASK 0x0004 /* SCSI Interrupt Sense Bit */#define DMV170_SCSI_INTERRUPT_NEGATE 0x0004#define DMV170_SCSI_INTERRUPT_ASSERT 0x0000#define DMV170_SCC_INTERRUPT_MASK 0x0008 /* SCC Interrupt Sense Bit */#define DMV170_SCC_INTERRUPT_NEGATE 0x0008#define DMV170_SCC_INTERRUPT_ASSERT 0x0000#define DMV170_SNOOP_ENABLE_MASK 0x0010 /* CPU Snoop Enable Bit */#define DMV170_SNOOP_DISABLE 0x0010#define DMV170_SNOOP_ENABLE 0x0000#define DMV170_SONIC_RESET_MASK 0x0020 /* SONIC RESET Control */#define DMV170_SONIC_RESET_CLEAR 0x0020#define DMV170_SONIC_RESET_HOLD 0x0000#define DMV170_NV64_WE_MASK 0x0040 /* 64-bit Non-Volital Memory */#define DMV170_NV64_WRITE_ENABLE 0x0040 /* Write Enable */#define DMV170_NV64_WRITE_DISABLE 0x0000#define DMV170_BOOT_NV16_MASK 0x0080 /* BOOT Device Type */#define DMV170_BOOT_64_BIT 0x0080#define DMV170_BOOT_16_BIT 0x0000#define DMV170_DUART_INST_MASK 0x0100 /* DUART Sense Bit */#define DMV170_DUART_INSTALLED 0x0100#define DMV170_DUART_NOT_INSTALLED 0x0000#define DMV170_SONIC_INST_MASK 0x0200 /* SONIC Sense Bit */#define DMV170_SONIC_INSTALLED 0x0200#define DMV170_SONIC_NOT_INSTALLED 0x0000#define DMV170_16M_NV64_MASK 0x0400 /* 16 Mb of 64bit Flash Sense */#define DMV170_16Mb_FLASH_INSTALLED 0x0400#define DMV170_8Mb_FLASH_INSTALLED 0x0000#define DMV170_SCC_INST_MASK 0x0800 /* SCC Sense Bit */#define DMV170_SCC_INSTALLED 0x0800#define DMV170_SCC_NOT_INSTALLED 0x0000#define DMV170_RTC_INST_MASK 0x1000 /* RTC Sense Bit */#define DMV170_RTC_INSTALLED 0x1000#define DMV170_RTC_NOT_INSTALLED 0x0000#define DMV170_NV64_INST_MASK 0x2000 /* 64bit Non-Volital Mem Sense*/#define DMV170_64_BIT_NON_VOLITAL_MEM_INSTALLED 0x2000#define DMV170_64_BIT_NON_VOLITAL_MEM_NOT_INSTALLED 0x0000/* * DUART Baud Rate Definitions. */#define DMV170_DUART_9621 MC68681_BAUD_RATE_MASK_600 /* close to 9600 */ #define DMV170_RTC_FREQUENCY 0x0000/* * CPU General Purpose Interrupt definations (PPC_IRQ_EXTERNAL). * Note: For the interrupt level read the lower 3 bits of the * Local Control and Status Register. */#define DMV170_IRQ_FIRST ( PPC_IRQ_LAST + 1 )#define DMV170_LIRQ0 ( DMV170_IRQ_FIRST + 0 )#define DMV170_LIRQ1 ( DMV170_IRQ_FIRST + 1 )#define DMV170_LIRQ2 ( DMV170_IRQ_FIRST + 2 )#define DMV170_LIRQ3 ( DMV170_IRQ_FIRST + 3 )#define DMV170_LIRQ4 ( DMV170_IRQ_FIRST + 4 )#define DMV170_LIRQ5 ( DMV170_IRQ_FIRST + 5 )#define DMV170_L7IACF ( DMV170_IRQ_FIRST + 6 )#define DMV170_L7ISYS ( DMV170_IRQ_FIRST + 7 )#define DMV170_L7IMNI ( DMV170_IRQ_FIRST + 8 )#define DMV170_BIMODE ( DMV170_IRQ_FIRST + 9 )#define DMV170_DUART_IRQ DMV170_LIRQ5#define DMV170_ETHERNET_IRQ DMV170_LIRQ5#define DMV170_SCSI_IRQ DMV170_LIRQ5#define DMV170_SCC_IRQ DMV170_LIRQ5#define DMV170_MEZZANINE_IRQ_0 DMV170_LIRQ4 #define DMV170_TICK_IRQ DMV170_LIRQ3#define DMV170_LOCATION_MON_IRQ DMV170_LIRQ2 #define DMV170_SCV64_IRQ DMV170_LIRQ1 #define DMV170_RTC_IRQ DMV170_LIRQ0#define DMV170_ACFAIL_IRQ DMV170_L7IACF#define DMV170_SYSFAIL_IRQ DMV170_L7ISYS#define DMV170_WATCHDOG_IRQ DMV170_L7IMNI#define DMV170_BI_IRQ DMV170_BIMODE#define DMV170_RAM_PARITY_IRQ ( DMV170_IRQ_FIRST + 10)#define DMV170_DARF_BUS_ERROR_IRQ ( DMV170_IRQ_FIRST + 11)#define DMV170_PERIPHERAL_IRQ ( DMV170_IRQ_FIRST + 12)#define MAX_BOARD_IRQS DMV170_PERIPHERAL_IRQ#define SCV64_Is_IRQ0( _status ) (_status&0x01)#define SCV64_Is_IRQ1( _status ) (_status&0x02)#define SCV64_Is_IRQ2( _status ) (_status&0x04)#define SCV64_Is_IRQ3( _status ) (_status&0x08)#define SCV64_Is_IRQ4( _status ) (_status&0x10)#define SCV64_Is_IRQ5( _status ) (_status&0x20)/* * scv64.c */void SCV64_Generate_DUART_Interrupts();rtems_unsigned32 SCV64_Get_Interrupt();rtems_unsigned32 SCV64_Get_Interrupt_Enable();#ifdef __cplusplus}#endif #endif /* !_INCLUDE_DMV170_h *//* end of include file */
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -