📄 getcfg.c
字号:
/* void Shm_Get_configuration( localnode, &shmcfg ) * * This routine initializes, if necessary, and returns a pointer * to the Shared Memory Configuration Table for the HP PA-RISC * simulator. * * INPUT PARAMETERS: * localnode - local node number * shmcfg - address of pointer to SHM Config Table * * OUTPUT PARAMETERS: * *shmcfg - pointer to SHM Config Table * * NOTES: The MP interrupt used is the Runway bus' ability to directly * address the control registers of up to four CPUs and cause * interrupts on them. * * The following table illustrates the configuration limitations: * * BUS MAX * MODE ENDIAN NODES * ========= ====== ======= * POLLED BIG 2+ * INTERRUPT BIG 2..4 (on Runway) * * COPYRIGHT (c) 1989-1999. * On-Line Applications Research Corporation (OAR). * * The license and distribution terms for this file may be * found in the file LICENSE in this distribution or at * http://www.rtems.com/license/LICENSE. * * $Id: getcfg.c,v 1.10.8.1 2003/09/04 18:43:57 joel Exp $ */#include <bsp.h>#include <shm_driver.h>#define INTERRUPT 0 /* can be interrupt or polling */#define POLLING 1#define HPPA_RUNWAY_PROC_HPA_BASE ((void *) 0xFFFA0000)/* given a processor number, where is its HPA? */#define HPPA_RUNWAY_HPA(cpu) \ ((rtems_unsigned32) (HPPA_RUNWAY_PROC_HPA_BASE + ((cpu) * 0x2000)))#define HPPA_RUNWAY_REG_IO_EIR_OFFSET 0x000shm_config_table BSP_shm_cfgtbl;extern void Shm_Cause_interrupt_pxfl( rtems_unsigned32 node );void Shm_Get_configuration( rtems_unsigned32 localnode, shm_config_table **shmcfg){ BSP_shm_cfgtbl.base = (vol_u32 *) 0x44000000; BSP_shm_cfgtbl.length = 16 * KILOBYTE; BSP_shm_cfgtbl.format = SHM_BIG; BSP_shm_cfgtbl.cause_intr = Shm_Cause_interrupt_pxfl;#ifdef NEUTRAL_BIG BSP_shm_cfgtbl.convert = NULL_CONVERT;#else BSP_shm_cfgtbl.convert = CPU_swap_u32;#endif#if ( POLLING == 1 ) BSP_shm_cfgtbl.poll_intr = POLLED_MODE; BSP_shm_cfgtbl.Intr.address = NO_INTERRUPT; BSP_shm_cfgtbl.Intr.value = NO_INTERRUPT; BSP_shm_cfgtbl.Intr.length = NO_INTERRUPT;#else BSP_shm_cfgtbl.poll_intr = INTR_MODE; BSP_shm_cfgtbl.Intr.address = (vol_u32 *) (HPPA_RUNWAY_HPA( localnode - 1) + HPPA_RUNWAY_REG_IO_EIR_OFFSET); BSP_shm_cfgtbl.Intr.value = HPPA_INTERRUPT_EXTERNAL_MPCI; BSP_shm_cfgtbl.Intr.length = LONG;#endif *shmcfg = &BSP_shm_cfgtbl;}
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -