aclocal.m4

RTEMS (Real-Time Executive for Multiprocessor Systems) is a free open source real-time operating sys

[# account for "aliased" bsps which share source code
  case $1 in
    simcpu32)     $2=sim68000         ;; # BSVC CPU32 variant
    c3xsim)       $2=c4xsim           ;; # TI C3x Simulator in gdb
    mcp750)       $2=motorola_powerpc ;; # Motorola PPC board variant
    mvme2100)     $2=motorola_powerpc ;; # Motorola PPC board variant
    mvme2307)     $2=motorola_powerpc ;; # Motorola PPC board variant
    mtx603e)      $2=motorola_powerpc ;; # Motorola PPC board variant
    mvme162lx)    $2=mvme162          ;; # m68k - mvme162 board variant
    gen68360_040) $2=gen68360         ;; # m68k - 68360 in companion mode
    p4600)        $2=p4000            ;; # mips64orion - p4000 board w/IDT 4600
    p4650)        $2=p4000            ;; # mips64orion - p4000 board w/IDT 4650
    mbx8*)        $2=mbx8xx           ;; # MBX821/MBX860 board
    pc386dx)      $2=pc386            ;; # i386 - PC w/o FPU
    pc486)        $2=pc386            ;; # i386 - PC with i486DX
    pc586)        $2=pc386            ;; # i386 - PC with Pentium
    pc686)        $2=pc386            ;; # i386 - PC with PentiumPro
    pck6)         $2=pc386            ;; # i386 - PC with K6
    bare*)        $2=bare             ;; # EXP: bare-aliases
    sis)     	  $2=erc32            ;; # ERC32 SIS simulator
    leon2)     	  $2=leon2            ;; # leon with fpu
    leon3)     	  $2=leon3            ;; # another leon variant
    simsh7032)    $2=shsim            ;; # SH7032 simulator
    simsh7045)    $2=shsim            ;; # SH7045 simulator
    *)            $2=$1;;
  esac]
)

dnl RTEMS_BSP_ALIAS(BSP_ALIAS,RTEMS_BSP_FAMILY)
dnl convert a bsp alias $1 into its bsp directory RTEMS_BSP_FAMILY
AC_DEFUN([RTEMS_BSP_ALIAS],
[_RTEMS_BSP_ALIAS(m4_if([$1],,[$RTEMS_BSP],[$1]),
  m4_if([$2],,[RTEMS_BSP_FAMILY],[$2]))]
)

dnl
dnl $Id: prog-cc.m4,v 1.18.2.2 2004/08/18 07:23:00 ralf Exp $
dnl 
dnl Check for target gcc
dnl

AC_DEFUN([RTEMS_PROG_CC],
[
AC_BEFORE([$0], [AC_PROG_CPP])dnl
AC_BEFORE([$0], [AC_PROG_CC])dnl
AC_BEFORE([$0], [RTEMS_CANONICALIZE_TOOLS])dnl

_RTEMS_FLAGS([CFLAGS],
  ["\$(CPU_CFLAGS) \$(RTEMS_CFLAGS_\$(VARIANT_V)_V) \$(CFLAGS_\$(VARIANT_V)_V) -g"])

RTEMS_CHECK_TOOL(CC,gcc)
test -z "$CC" && \
  AC_MSG_ERROR([no acceptable cc found in \$PATH])
AC_PROG_CC
AC_PROG_CPP

AM_CONDITIONAL(RTEMS_USE_GCC,test x"$GCC" = x"yes")
])

AC_DEFUN([RTEMS_PROG_CC_FOR_TARGET],
[
dnl check target cc
RTEMS_PROG_CC
dnl check if the compiler supports -isystem
RTEMS_GCC_ISYSTEM
dnl check if the target compiler may use --pipe
RTEMS_GCC_PIPE
test "$rtems_cv_gcc_pipe" = "yes" && CC="$CC --pipe"

dnl check if the compiler supports --specs
RTEMS_GCC_SPECS

if test "$GCC" = yes; then
RTEMS_CFLAGS="$RTEMS_CFLAGS -Wall"
m4_if([$1],,[],[RTEMS_CFLAGS="$RTEMS_CFLAGS $1"])
fi

AS_IF([test x"$rtems_cv_gcc_isystem" = x"yes"],[
  RTEMS_CPPFLAGS="-isystem \$(PROJECT_INCLUDE)"],[
  RTEMS_CPPFLAGS="-I\$(PROJECT_INCLUDE)"
])
AC_SUBST(RTEMS_CPPFLAGS)
])

dnl
dnl $Id: canonicalize-tools.m4,v 1.16.2.1 2004/08/18 07:23:00 ralf Exp $
dnl
dnl Set target tools
dnl

AC_DEFUN([RTEMS_CANONICALIZE_TOOLS],
[AC_REQUIRE([RTEMS_PROG_CC])dnl

dnl FIXME: What shall be done if these tools are not available?
  RTEMS_CHECK_TOOL(AR,ar,no)
  RTEMS_CHECK_TOOL(AS,as,no)
  RTEMS_CHECK_TOOL(LD,ld,no)
  RTEMS_CHECK_TOOL(NM,nm,no)

dnl special treatment of ranlib
  RTEMS_CHECK_TOOL(RANLIB,ranlib,:)

dnl NOTE: These may not be available if not using gnutools
  RTEMS_CHECK_TOOL(OBJCOPY,objcopy,no)
  RTEMS_CHECK_TOOL(SIZE,size,no)
  RTEMS_CHECK_TOOL(STRIP,strip,:)
])

dnl $Id: check-tool.m4,v 1.2.4.1 2004/08/18 07:23:00 ralf Exp $

dnl RTEMS_CHECK_TOOL(VARIABLE, PROG-TO-CHECK-FOR[, VALUE-IF-NOT-FOUND [, PATH]])
AC_DEFUN([RTEMS_CHECK_TOOL],
[
  AS_IF([test "x$build_alias" != "x$host_alias"],
    [rtems_tool_prefix=${ac_tool_prefix}])
  AC_CHECK_PROG($1, ${rtems_tool_prefix}$2, ${rtems_tool_prefix}$2, $3, $4)
])


AC_DEFUN([_RTEMS_FLAGS],[
AS_IF([test -n "[$]{$1}"],
  [RTEMS_$1=[$]{$1}],
  [RTEMS_$1=$2])
AC_SUBST([RTEMS_$1])
])

dnl
dnl $Id: gcc-isystem.m4,v 1.1.2.2 2004/08/18 07:23:00 ralf Exp $
dnl
dnl Check whether the gcc accepts -isystem
dnl

AC_DEFUN([RTEMS_GCC_ISYSTEM],
[AC_REQUIRE([RTEMS_PROG_CC])
AC_CACHE_CHECK(whether $CC accepts -isystem,rtems_cv_gcc_isystem,
[
rtems_cv_gcc_isystem=no
if test x"$GCC" = x"yes"; then
cat << EOF > conftest.h
int conftest123();
EOF
cat << EOF > conftest.c
#include <conftest.h>
int conftest123() {}
EOF
  if test -z "`${CC} -isystem./ -c conftest.c 2>&1`";then
    rtems_cv_gcc_isystem=yes
  fi
fi
rm -f conftest*
])])

dnl
dnl $Id: gcc-pipe.m4,v 1.8.6.1 2004/08/18 07:23:00 ralf Exp $
dnl
dnl Check whether the target compiler accepts -pipe
dnl

AC_DEFUN([RTEMS_GCC_PIPE],
[AC_REQUIRE([RTEMS_PROG_CC]) 
AC_REQUIRE([AC_CANONICAL_HOST])
AC_CACHE_CHECK(whether $CC accepts --pipe,rtems_cv_gcc_pipe,
[
rtems_cv_gcc_pipe=no
if test x"$GCC" = x"yes"; then
    echo 'void f(){}' >conftest.c
    if test -z "`${CC} --pipe -c conftest.c 2>&1`";then
      rtems_cv_gcc_pipe=yes
    fi
    rm -f conftest*
fi
])
])

dnl
dnl $Id: gcc-specs.m4,v 1.5.6.1 2004/08/18 07:23:00 ralf Exp $
dnl
dnl Check whether the target compiler accepts -specs
dnl

AC_DEFUN([RTEMS_GCC_SPECS],
[AC_REQUIRE([RTEMS_PROG_CC])
AC_CACHE_CHECK(whether $CC accepts -specs,rtems_cv_gcc_specs,
[
rtems_cv_gcc_specs=no
if test x"$GCC" = x"yes"; then
  touch confspec
  echo 'void f(){}' >conftest.c
  if test -z "`${CC} -specs confspec -c conftest.c 2>&1`";then
    rtems_cv_gcc_specs=yes
  fi
fi
rm -f confspec conftest*
])])

dnl $Id: target.m4,v 1.12.2.2 2004/08/18 07:38:49 ralf Exp $

AC_DEFUN([RTEMS_CONFIG_BUILD_SUBDIRS],
[AC_REQUIRE([_RTEMS_OUTPUT_BUILD_SUBDIRS])
RTEMS_BUILD_SUBDIRS="$RTEMS_BUILD_SUBDIRS [$1]"
])

dnl Derived from automake-1.4's AC_OUTPUT_SUBDIRS
AC_DEFUN([_RTEMS_OUTPUT_BUILD_SUBDIRS],
[AC_CONFIG_COMMANDS([bsp-tools],
[
# HACK: This is a blantant hack and breaks Canadian crosses
build_alias="$build_alias"
host_alias="$build_alias"
if test "$no_recursion" != yes; then
  if test x"$build_alias" != x"$host_alias"; then 
    target_subdir="$host_alias"
  else
    target_subdir="."
  fi
  RTEMS_CONFIGURE_ARGS_QUOTE([ac_sub_configure_args],
    [
    -host* | --host* ) ;;
    --host ) ac_prev=host_alias;;
    -target* | --target* ) ;;
    -target ) ac_prev=target_alias ;;
    -build* | --build* ) ;;
    -build ) ac_prev_build_alias ;;
    *_alias=* ) ;; # HACK: Workaround to autoconf passing *_alias
    ],
    [rtems_configure_args])

  for rtems_config_dir in $RTEMS_BUILD_SUBDIRS; do
    # Do not complain, so a configure script can configure whichever
    # parts of a large source tree are present.
    if test ! -d $srcdir/$rtems_config_dir; then
      continue
    fi

    _RTEMS_PUSH_BUILDDIR([$rtems_config_dir])

    _RTEMS_SUB_SRCDIR([$rtems_config_dir])

    # The recursion is here.
    if test -n "$ac_sub_configure"; then
#      ac_sub_cache_file=./config.cache
      ac_sub_cache_file=/dev/null
      _RTEMS_GIVEN_INSTALL

      echo "[running ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file] --srcdir=$ac_sub_srcdir"
      # The eval makes quoting arguments work.
      if eval ${CONFIG_SHELL-/bin/sh} $ac_sub_configure \
	$ac_sub_configure_args \
	--srcdir=$ac_sub_srcdir \
	--with-target-subdir=$target_subdir \
        --cache-file=$ac_sub_cache_file 
      then :
      else
        AC_MSG_ERROR([$ac_sub_configure failed for $rtems_config_dir])
      fi
    fi

    _RTEMS_POP_BUILDDIR
  done
fi],
[
RTEMS_BUILD_SUBDIRS="$RTEMS_BUILD_SUBDIRS"
rtems_configure_args="$ac_configure_args"
])
])

AU_DEFUN([RTEMS_OUTPUT_BUILD_SUBDIRS],[])


dnl
dnl Misc utility macros for subdir handling to work around missing abilities
dnl in autoconf, automake and structural issues with RTEMS
dnl
dnl Contains parts derived from autoconf-2.13 AC_OUTPUT_SUBDIRS and Cygnus'
dnl configure.in.
dnl

dnl
dnl _RTEMS_PUSH_BUILDDIR(SUBDIR)
dnl
AC_DEFUN([_RTEMS_PUSH_BUILDDIR],
[
# _RTEMS_PUSH_BUILDDIR
    echo configuring in $1
    case "$srcdir" in
    .) ;;
    *) AS_MKDIR_P([$1])
      ;;
    esac

    ac_popdir=`pwd`
    cd $1
])

dnl
dnl _RTEMS_POP_BUILDDIR
dnl
AC_DEFUN([_RTEMS_POP_BUILDDIR],
[
  cd "$ac_popdir"
])

dnl
dnl _RTEMS_GIVEN_INSTALL
dnl
AC_DEFUN([_RTEMS_GIVEN_INSTALL],
[
ifdef([AC_PROVIDE_AC_PROG_INSTALL],[  
  case "$ac_given_INSTALL" in
  [[\\/]]* | ?:[[\\/]]*) INSTALL="$ac_given_INSTALL" ;;
  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
  esac
])dnl
])

dnl
dnl _RTEMS_SUB_SRCDIR(AC_CONFIG_DIR[,TARGET_SUBDIR])
dnl
AC_DEFUN([_RTEMS_SUB_SRCDIR],[
# _RTEMS_SUB_SRCDIR
    _RTEMS_ADJUST_SRCDIR(ac_sub_srcdir,$1,$2)

    # Check for configure
    if test -f $ac_sub_srcdir/configure; then
      ac_sub_configure=$ac_sub_srcdir/configure
    else
      AC_MSG_WARN([no configuration information is in $1])
      ac_sub_configure=
    fi
])

dnl RTEMS_CONFIGURE_ARGS_QUOTE(dnl RETURN_VAR, [ADDITIONAL_CASES], [VAR_TO_PROCESS]])
dnl 
AC_DEFUN([_RTEMS_CONFIGURE_ARGS_QUOTE],
[
$1_prune()
{
  # Remove --cache-file and --srcdir arguments so they do not pile up.
  $1=
  ac_prev=
  for ac_arg
  do
    if test -n "$ac_prev"; then
      ac_prev=
      continue
    fi
    case $ac_arg in
    -cache-file | --cache-file | --cache-fil | --cache-fi \
    | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
	  ac_prev=cache_file ;;
    -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
    | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* \
    | --c=*)
      ;;
    --config-cache | -C)
      ;;
    -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
	  ac_prev=srcdir ;;
    -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
      ;;
    m4_if([$2],,,[$2])
    *) $1="$$1 '$ac_arg'" ;;
    esac
  done
  export $1
}
])

AC_DEFUN([RTEMS_CONFIGURE_ARGS_QUOTE],[
m4_expand_once([_RTEMS_CONFIGURE_ARGS_QUOTE([$1],[$2])])
eval $1_prune m4_if([$3],,[$ac_configure_args],[[$]$3])
])

dnl $Id: config-subdirs.m4,v 1.6.4.1 2004/08/18 07:23:00 ralf Exp $

dnl
dnl Misc utility macros for subdir handling to work around missing abilities
dnl in autoconf, automake and structural issues with RTEMS
dnl
dnl Contains parts derived from autoconf-2.13 AC_OUTPUT_SUBDIRS and Cygnus'
dnl configure.in.
dnl

dnl
dnl _AC_DOTS(PATH)
dnl
AC_DEFUN([_AC_DOTS],[
# A "../" for each directory in $1.
    ac_dots=`echo $1 | \
             sed -e 's%^\./%%' -e 's%[[^/]]$%&/%' -e 's%[[^/]]*/%../%g'`
])

dnl
dnl _RTEMS_ADJUST_SRCDIR(REVAR,CONFIG_DIR[,TARGET_SUBDIR])
dnl
AC_DEFUN([_RTEMS_ADJUST_SRCDIR],[
    _AC_DOTS(ifelse([$3], ,[$2],[$3/$2]))

    case "$srcdir" in
    .) # No --srcdir option.  We are building in place.
      $1=$srcdir ;;
    [[\\/]]* | ?:[[\\/]]*) # Absolute path.
      $1=$srcdir/$2 ;;
    *) # Relative path.
      $1=$ac_dots$srcdir/$2 ;;
    esac
])