regs.s

RTEMS (Real-Time Executive for Multiprocessor Systems) is a free open source real-time operating sys

/*
 * regs.S -- standard MIPS register names from
 * newlib-1.8.2/libgloss/mips and adapted.
 *
 * Copyright (c) 1995 Cygnus Support
 *
 * The authors hereby grant permission to use, copy, modify, distribute,
 * and license this software and its documentation for any purpose, provided
 * that existing copyright notices are retained in all copies and that this
 * notice is included verbatim in any distributions. No written agreement,
 * license, or royalty fee is required for any of the authorized uses.
 * Modifications to this software may be copyrighted by their authors
 * and need not follow the licensing terms described here, provided that
 * the new terms are clearly indicated on the first page of each file where
 * they apply.
 */

/* Standard MIPS register names: */
#define zero	$0
#define z0	$0
#define v0	$2
#define v1	$3
#define a0	$4
#define a1	$5
#define a2	$6
#define a3	$7
#define t0	$8
#define t1	$9
#define t2	$10
#define t3	$11
#define t4	$12
#define t5	$13
#define t6	$14
#define t7	$15
#define s0	$16
#define s1	$17
#define s2	$18
#define s3	$19
#define s4	$20
#define s5	$21
#define s6	$22
#define s7	$23
#define t8	$24
#define t9	$25
#define k0	$26	/* kernel private register 0 */
#define k1	$27	/* kernel private register 1 */
#define gp	$28	/* global data pointer */
#define sp 	$29	/* stack-pointer */
#define fp	$30	/* frame-pointer */
#define ra	$31	/* return address */
#define pc	$pc	/* pc, used on mips16 */

#define fp0	$f0
#define fp1	$f1

/* Useful memory constants: */
#define K0BASE		0x80000000
#ifndef __mips64
#define K1BASE		0xA0000000
#else
#define K1BASE		0xFFFFFFFFA0000000LL
#endif

#define PHYS_TO_K1(a)   ((unsigned)(a) | K1BASE)

/* Standard Co-Processor 0 register numbers: */
#define C0_COUNT	$9		/* Count Register */
#define C0_SR		$12		/* Status Register */
#define C0_CAUSE	$13		/* last exception description */
#define C0_EPC		$14		/* Exception error address */
#define C0_CONFIG	$16		/* CPU configuration */

/* Standard Status Register bitmasks: */
#define SR_CU1		0x20000000	/* Mark CP1 as usable */
#define SR_FR		0x04000000	/* Enable MIPS III FP registers */
#define SR_BEV		0x00400000	/* Controls location of exception vectors */
#define SR_PE		0x00100000	/* Mark soft reset (clear parity error) */

#define SR_KX		0x00000080	/* Kernel extended addressing enabled */
#define SR_SX		0x00000040	/* Supervisor extended addressing enabled */
#define SR_UX		0x00000020	/* User extended addressing enabled */

/* Standard (R4000) cache operations. Taken from "MIPS R4000
   Microprocessor User's Manual" 2nd edition: */

#define CACHE_I		(0)	/* primary instruction */
#define CACHE_D		(1)	/* primary data */
#define CACHE_SI	(2)	/* secondary instruction */
#define CACHE_SD	(3)	/* secondary data (or combined instruction/data) */

#define INDEX_INVALIDATE		(0)	/* also encodes WRITEBACK if CACHE_D or CACHE_SD */
#define INDEX_LOAD_TAG			(1)
#define INDEX_STORE_TAG			(2)
#define CREATE_DIRTY_EXCLUSIVE		(3)	/* CACHE_D and CACHE_SD only */
#define HIT_INVALIDATE			(4)
#define CACHE_FILL			(5)	/* CACHE_I only */
#define HIT_WRITEBACK_INVALIDATE	(5)	/* CACHE_D and CACHE_SD only */
#define HIT_WRITEBACK			(6)	/* CACHE_I, CACHE_D and CACHE_SD only */
#define HIT_SET_VIRTUAL			(7)	/* CACHE_SI and CACHE_SD only */

#define BUILD_CACHE_OP(o,c)		(((o) << 2) | (c))

/* Individual cache operations: */
#define INDEX_INVALIDATE_I		BUILD_CACHE_OP(INDEX_INVALIDATE,CACHE_I)
#define INDEX_WRITEBACK_INVALIDATE_D	BUILD_CACHE_OP(INDEX_INVALIDATE,CACHE_D)
#define INDEX_INVALIDATE_SI             BUILD_CACHE_OP(INDEX_INVALIDATE,CACHE_SI)
#define INDEX_WRITEBACK_INVALIDATE_SD	BUILD_CACHE_OP(INDEX_INVALIDATE,CACHE_SD)

#define INDEX_LOAD_TAG_I		BUILD_CACHE_OP(INDEX_LOAD_TAG,CACHE_I)
#define INDEX_LOAD_TAG_D                BUILD_CACHE_OP(INDEX_LOAD_TAG,CACHE_D)
#define INDEX_LOAD_TAG_SI               BUILD_CACHE_OP(INDEX_LOAD_TAG,CACHE_SI)
#define INDEX_LOAD_TAG_SD               BUILD_CACHE_OP(INDEX_LOAD_TAG,CACHE_SD)

#define INDEX_STORE_TAG_I              	BUILD_CACHE_OP(INDEX_STORE_TAG,CACHE_I)
#define INDEX_STORE_TAG_D               BUILD_CACHE_OP(INDEX_STORE_TAG,CACHE_D)
#define INDEX_STORE_TAG_SI              BUILD_CACHE_OP(INDEX_STORE_TAG,CACHE_SI)
#define INDEX_STORE_TAG_SD              BUILD_CACHE_OP(INDEX_STORE_TAG,CACHE_SD)

#define CREATE_DIRTY_EXCLUSIVE_D        BUILD_CACHE_OP(CREATE_DIRTY_EXCLUSIVE,CACHE_D)
#define CREATE_DIRTY_EXCLUSIVE_SD       BUILD_CACHE_OP(CREATE_DIRTY_EXCLUSIVE,CACHE_SD)

#define HIT_INVALIDATE_I                BUILD_CACHE_OP(HIT_INVALIDATE,CACHE_I)
#define HIT_INVALIDATE_D                BUILD_CACHE_OP(HIT_INVALIDATE,CACHE_D)
#define HIT_INVALIDATE_SI               BUILD_CACHE_OP(HIT_INVALIDATE,CACHE_SI)
#define HIT_INVALIDATE_SD               BUILD_CACHE_OP(HIT_INVALIDATE,CACHE_SD)

#define CACHE_FILL_I                    BUILD_CACHE_OP(CACHE_FILL,CACHE_I)
#define HIT_WRITEBACK_INVALIDATE_D      BUILD_CACHE_OP(HIT_WRITEBACK_INVALIDATE,CACHE_D)
#define HIT_WRITEBACK_INVALIDATE_SD     BUILD_CACHE_OP(HIT_WRITEBACK_INVALIDATE,CACHE_SD)

#define HIT_WRITEBACK_I                 BUILD_CACHE_OP(HIT_WRITEBACK,CACHE_I)
#define HIT_WRITEBACK_D                 BUILD_CACHE_OP(HIT_WRITEBACK,CACHE_D)
#define HIT_WRITEBACK_SD                BUILD_CACHE_OP(HIT_WRITEBACK,CACHE_SD)

#define HIT_SET_VIRTUAL_SI		BUILD_CACHE_OP(HIT_SET_VIRTUAL,CACHE_SI)
#define HIT_SET_VIRTUAL_SD              BUILD_CACHE_OP(HIT_SET_VIRTUAL,CACHE_SD)

/*> EOF regs.S <*/