regs.s

RTEMS (Real-Time Executive for Multiprocessor Systems) is a free open source real-time operating sys

/*
 * regs.S -- standard MIPS register names from
 * newlib-1.8.2/libgloss/mips and adapted.
 *
 * Copyright (c) 1995 Cygnus Support
 *
 * The authors hereby grant permission to use, copy, modify, distribute,
 * and license this software and its documentation for any purpose, provided
 * that existing copyright notices are retained in all copies and that this
 * notice is included verbatim in any distributions. No written agreement,
 * license, or royalty fee is required for any of the authorized uses.
 * Modifications to this software may be copyrighted by their authors
 * and need not follow the licensing terms described here, provided that
 * the new terms are clearly indicated on the first page of each file where
 * they apply.
 */

/* Standard MIPS register names: */
#define zero    $0
#define z0  $0
#define v0  $2
#define v1  $3
#define a0  $4
#define a1  $5
#define a2  $6
#define a3  $7
#define t0  $8
#define t1  $9
#define t2  $10
#define t3  $11
#define t4  $12
#define t5  $13
#define t6  $14
#define t7  $15
#define s0  $16
#define s1  $17
#define s2  $18
#define s3  $19
#define s4  $20
#define s5  $21
#define s6  $22
#define s7  $23
#define t8  $24
#define t9  $25
#define k0  $26 /* kernel private register 0 */
#define k1  $27 /* kernel private register 1 */
#define gp  $28 /* global data pointer */
#define sp  $29 /* stack-pointer */
#define fp  $30 /* frame-pointer */
#define ra  $31 /* return address */
#define pc  $pc /* pc, used on mips16 */

#define fp0 $f0
#define fp1 $f1

#define WATCHDOG    0xBE000000

/* Useful memory constants: */
#define K0BASE      0x80000000
#ifndef __mips64
   #define K1BASE       0xA0000000
#else
#define K1BASE      0xFFFFFFFFA0000000LL
#endif

#define PHYS_TO_K1(a)   ((unsigned)(a) | K1BASE)

/* Standard Co-Processor 0 register numbers: */
#define C0_DCIC     $7      /* debug & cache invalidate control */
#define C0_COUNT    $9      /* Count Register */
#define C0_SR           $12         /* Status Register */
#define C0_CAUSE    $13     /* last exception description */
#define C0_EPC      $14         /* Exception error address */
#define C0_CONFIG   $16     /* CPU configuration */

/* Standard Status Register bitmasks: */
#define SR_CU0          0x10000000
#define SR_CU1      0x20000000  /* Mark CP1 as usable */
#define SR_FR       0x04000000  /* Enable MIPS III FP registers */
#define SR_BEV      0x00400000  /* Controls location of exception vectors */
#define SR_PE       0x00100000  /* Mark soft reset (clear parity error) */

/* defined differently for Mongoose5- we don't use these anymore */
//#define SR_KX     0x00000080  /* Kernel extended addressing enabled */
//#define SR_SX     0x00000040  /* Supervisor extended addressing enabled */
//#define SR_UX     0x00000020  /* User extended addressing enabled */

/* R3000 */
#define SR_ISC      0x00010000  /* Isolate data cache */

/* Standard (R4000) cache operations. Taken from "MIPS R4000
   Microprocessor User's Manual" 2nd edition: */

#define CACHE_I     (0) /* primary instruction */
#define CACHE_D     (1) /* primary data */
#define CACHE_SI    (2) /* secondary instruction */
#define CACHE_SD    (3) /* secondary data (or combined instruction/data) */

#define INDEX_INVALIDATE        (0) /* also encodes WRITEBACK if CACHE_D or CACHE_SD */
#define INDEX_LOAD_TAG          (1)
#define INDEX_STORE_TAG         (2)
#define CREATE_DIRTY_EXCLUSIVE      (3) /* CACHE_D and CACHE_SD only */
#define HIT_INVALIDATE          (4)
#define CACHE_FILL          (5) /* CACHE_I only */
#define HIT_WRITEBACK_INVALIDATE    (5) /* CACHE_D and CACHE_SD only */
#define HIT_WRITEBACK           (6) /* CACHE_I, CACHE_D and CACHE_SD only */
#define HIT_SET_VIRTUAL         (7) /* CACHE_SI and CACHE_SD only */

#define BUILD_CACHE_OP(o,c)     (((o) << 2) | (c))

/* Individual cache operations: */
#define INDEX_INVALIDATE_I      BUILD_CACHE_OP(INDEX_INVALIDATE,CACHE_I)
#define INDEX_WRITEBACK_INVALIDATE_D    BUILD_CACHE_OP(INDEX_INVALIDATE,CACHE_D)
#define INDEX_INVALIDATE_SI             BUILD_CACHE_OP(INDEX_INVALIDATE,CACHE_SI)
#define INDEX_WRITEBACK_INVALIDATE_SD   BUILD_CACHE_OP(INDEX_INVALIDATE,CACHE_SD)

#define INDEX_LOAD_TAG_I        BUILD_CACHE_OP(INDEX_LOAD_TAG,CACHE_I)
#define INDEX_LOAD_TAG_D                BUILD_CACHE_OP(INDEX_LOAD_TAG,CACHE_D)
#define INDEX_LOAD_TAG_SI               BUILD_CACHE_OP(INDEX_LOAD_TAG,CACHE_SI)
#define INDEX_LOAD_TAG_SD               BUILD_CACHE_OP(INDEX_LOAD_TAG,CACHE_SD)

#define INDEX_STORE_TAG_I               BUILD_CACHE_OP(INDEX_STORE_TAG,CACHE_I)
#define INDEX_STORE_TAG_D               BUILD_CACHE_OP(INDEX_STORE_TAG,CACHE_D)
#define INDEX_STORE_TAG_SI              BUILD_CACHE_OP(INDEX_STORE_TAG,CACHE_SI)
#define INDEX_STORE_TAG_SD              BUILD_CACHE_OP(INDEX_STORE_TAG,CACHE_SD)

#define CREATE_DIRTY_EXCLUSIVE_D        BUILD_CACHE_OP(CREATE_DIRTY_EXCLUSIVE,CACHE_D)
#define CREATE_DIRTY_EXCLUSIVE_SD       BUILD_CACHE_OP(CREATE_DIRTY_EXCLUSIVE,CACHE_SD)

#define HIT_INVALIDATE_I                BUILD_CACHE_OP(HIT_INVALIDATE,CACHE_I)
#define HIT_INVALIDATE_D                BUILD_CACHE_OP(HIT_INVALIDATE,CACHE_D)
#define HIT_INVALIDATE_SI               BUILD_CACHE_OP(HIT_INVALIDATE,CACHE_SI)
#define HIT_INVALIDATE_SD               BUILD_CACHE_OP(HIT_INVALIDATE,CACHE_SD)

#define CACHE_FILL_I                    BUILD_CACHE_OP(CACHE_FILL,CACHE_I)
#define HIT_WRITEBACK_INVALIDATE_D      BUILD_CACHE_OP(HIT_WRITEBACK_INVALIDATE,CACHE_D)
#define HIT_WRITEBACK_INVALIDATE_SD     BUILD_CACHE_OP(HIT_WRITEBACK_INVALIDATE,CACHE_SD)

#define HIT_WRITEBACK_I                 BUILD_CACHE_OP(HIT_WRITEBACK,CACHE_I)
#define HIT_WRITEBACK_D                 BUILD_CACHE_OP(HIT_WRITEBACK,CACHE_D)
#define HIT_WRITEBACK_SD                BUILD_CACHE_OP(HIT_WRITEBACK,CACHE_SD)

#define HIT_SET_VIRTUAL_SI      BUILD_CACHE_OP(HIT_SET_VIRTUAL,CACHE_SI)
#define HIT_SET_VIRTUAL_SD              BUILD_CACHE_OP(HIT_SET_VIRTUAL,CACHE_SD)

/*> EOF regs.S <*/