aclocal.m4

RTEMS (Real-Time Executive for Multiprocessor Systems) is a free open source real-time operating sys

[dnl
AC_REQUIRE([RTEMS_ENABLE_MULTILIB])dnl
AC_REQUIRE([RTEMS_ENV_RTEMSBSP])dnl
AC_REQUIRE([RTEMS_TOP])dnl
AC_REQUIRE([RTEMS_CHECK_CPU])dnl
AC_REQUIRE([RTEMS_ENABLE_MULTIPROCESSING])dnl
AC_REQUIRE([RTEMS_BSP_ALIAS])dnl

AC_CACHE_CHECK([if wanting multiprocessing],
  [rtems_cv_want_multiprocessing],
  [
    AS_IF([test x"$multilib" = x"no"],
      [# no cpukit
       rtems_cv_want_multiprocessing="$enable_multiprocessing"
      ],[
#HACK: Should check for RTEMS_MULTIPROCESSING in cpuopts.h, instead
       rtems_cv_want_multiprocessing="$enable_multiprocessing"
      ])
  ])

AS_IF([test "$rtems_cv_want_multiprocessing" = "yes"],
[
  AC_CACHE_CHECK([whether BSP supports multiprocessing],
  [rtems_cv_HAS_MP],[
    if test -d "$srcdir/${RTEMS_TOPdir}/c/src/lib/libbsp/${RTEMS_CPU}/${RTEMS_BSP_FAMILY}/shmsupp"; then
        rtems_cv_HAS_MP="yes" ;
    else
        rtems_cv_HAS_MP="no";
    fi
  ])
if test $rtems_cv_HAS_MP = "no"; then
AC_MSG_ERROR([multiprocessing requested but not supported])
fi
],[rtems_cv_HAS_MP="no";])

AC_SUBST(HAS_MP,[$rtems_cv_HAS_MP])
])

dnl This provides configure definitions used for multilib support

dnl parts of these macros are derived from newlib-1.8.2's multilib support

AC_DEFUN([RTEMS_ENABLE_MULTILIB],
[
AC_ARG_ENABLE(multilib,
AC_HELP_STRING([--enable-multilib],
[build many library versions (default=no)]),
[case "${enableval}" in
  yes) multilib=yes ;;
  no)  multilib=no ;;
  *)   AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
 esac], [multilib=no])dnl

AM_CONDITIONAL(MULTILIB,test x"${multilib}" = x"yes")
])

dnl $Id: check-cpu.m4,v 1.6.2.1 2004/08/18 07:23:00 ralf Exp $

dnl check if RTEMS support a cpu
AC_DEFUN([RTEMS_CHECK_CPU],
[dnl
AC_REQUIRE([RTEMS_TOP])
AC_REQUIRE([RTEMS_CANONICAL_TARGET_CPU])

# Is this a supported CPU?
AC_MSG_CHECKING([if cpu $RTEMS_CPU is supported])
# FIXME: Temporary hack
if test -d "$srcdir/$RTEMS_TOPdir/cpukit/score/cpu/$RTEMS_CPU"; then
  AC_MSG_RESULT(yes)
else
  AC_MSG_ERROR(no)
fi
])dnl


dnl $Id: enable-multiprocessing.m4,v 1.6.2.1 2004/08/18 07:23:00 ralf Exp $

AC_DEFUN([RTEMS_ENABLE_MULTIPROCESSING],
[
AC_ARG_ENABLE(multiprocessing,
[AC_HELP_STRING([--enable-multiprocessing],
[enable multiprocessing interface])],
[case "${enable_multiprocessing}" in 
  yes) ;;
  no) ;;
  *)  AC_MSG_ERROR(bad value ${enableval} for enable-multiprocessing option) ;;
esac],[enable_multiprocessing=no])
])

dnl
dnl  $Id: bsp-alias.m4,v 1.16.2.3 2005/10/05 19:31:20 joel Exp $
dnl 

dnl _RTEMS_BSP_ALIAS(BSP_ALIAS,RTEMS_BSP_FAMILY)
dnl Internal subroutine to RTEMS_BSP_ALIAS
AC_DEFUN([_RTEMS_BSP_ALIAS],
[# account for "aliased" bsps which share source code
  case $1 in
    simcpu32)     $2=sim68000         ;; # BSVC CPU32 variant
    c3xsim)       $2=c4xsim           ;; # TI C3x Simulator in gdb
    mcp750)       $2=motorola_powerpc ;; # Motorola PPC board variant
    mvme2100)     $2=motorola_powerpc ;; # Motorola PPC board variant
    mvme2307)     $2=motorola_powerpc ;; # Motorola PPC board variant
    mtx603e)      $2=motorola_powerpc ;; # Motorola PPC board variant
    mvme162lx)    $2=mvme162          ;; # m68k - mvme162 board variant
    gen68360_040) $2=gen68360         ;; # m68k - 68360 in companion mode
    p4600)        $2=p4000            ;; # mips64orion - p4000 board w/IDT 4600
    p4650)        $2=p4000            ;; # mips64orion - p4000 board w/IDT 4650
    mbx8*)        $2=mbx8xx           ;; # MBX821/MBX860 board
    pc386dx)      $2=pc386            ;; # i386 - PC w/o FPU
    pc486)        $2=pc386            ;; # i386 - PC with i486DX
    pc586)        $2=pc386            ;; # i386 - PC with Pentium
    pc686)        $2=pc386            ;; # i386 - PC with PentiumPro
    pck6)         $2=pc386            ;; # i386 - PC with K6
    bare*)        $2=bare             ;; # EXP: bare-aliases
    sis)     	  $2=erc32            ;; # ERC32 SIS simulator
    leon2)     	  $2=leon2            ;; # leon with fpu
    leon3)     	  $2=leon3            ;; # another leon variant
    simsh7032)    $2=shsim            ;; # SH7032 simulator
    simsh7045)    $2=shsim            ;; # SH7045 simulator
    *)            $2=$1;;
  esac]
)

dnl RTEMS_BSP_ALIAS(BSP_ALIAS,RTEMS_BSP_FAMILY)
dnl convert a bsp alias $1 into its bsp directory RTEMS_BSP_FAMILY
AC_DEFUN([RTEMS_BSP_ALIAS],
[_RTEMS_BSP_ALIAS(m4_if([$1],,[$RTEMS_BSP],[$1]),
  m4_if([$2],,[RTEMS_BSP_FAMILY],[$2]))]
)

dnl
dnl $Id: prog-cc.m4,v 1.18.2.2 2004/08/18 07:23:00 ralf Exp $
dnl 
dnl Check for target gcc
dnl

AC_DEFUN([RTEMS_PROG_CC],
[
AC_BEFORE([$0], [AC_PROG_CPP])dnl
AC_BEFORE([$0], [AC_PROG_CC])dnl
AC_BEFORE([$0], [RTEMS_CANONICALIZE_TOOLS])dnl

_RTEMS_FLAGS([CFLAGS],
  ["\$(CPU_CFLAGS) \$(RTEMS_CFLAGS_\$(VARIANT_V)_V) \$(CFLAGS_\$(VARIANT_V)_V) -g"])

RTEMS_CHECK_TOOL(CC,gcc)
test -z "$CC" && \
  AC_MSG_ERROR([no acceptable cc found in \$PATH])
AC_PROG_CC
AC_PROG_CPP

AM_CONDITIONAL(RTEMS_USE_GCC,test x"$GCC" = x"yes")
])

AC_DEFUN([RTEMS_PROG_CC_FOR_TARGET],
[
dnl check target cc
RTEMS_PROG_CC
dnl check if the compiler supports -isystem
RTEMS_GCC_ISYSTEM
dnl check if the target compiler may use --pipe
RTEMS_GCC_PIPE
test "$rtems_cv_gcc_pipe" = "yes" && CC="$CC --pipe"

dnl check if the compiler supports --specs
RTEMS_GCC_SPECS

if test "$GCC" = yes; then
RTEMS_CFLAGS="$RTEMS_CFLAGS -Wall"
m4_if([$1],,[],[RTEMS_CFLAGS="$RTEMS_CFLAGS $1"])
fi

AS_IF([test x"$rtems_cv_gcc_isystem" = x"yes"],[
  RTEMS_CPPFLAGS="-isystem \$(PROJECT_INCLUDE)"],[
  RTEMS_CPPFLAGS="-I\$(PROJECT_INCLUDE)"
])
AC_SUBST(RTEMS_CPPFLAGS)
])

dnl
dnl $Id: canonicalize-tools.m4,v 1.16.2.1 2004/08/18 07:23:00 ralf Exp $
dnl
dnl Set target tools
dnl

AC_DEFUN([RTEMS_CANONICALIZE_TOOLS],
[AC_REQUIRE([RTEMS_PROG_CC])dnl

dnl FIXME: What shall be done if these tools are not available?
  RTEMS_CHECK_TOOL(AR,ar,no)
  RTEMS_CHECK_TOOL(AS,as,no)
  RTEMS_CHECK_TOOL(LD,ld,no)
  RTEMS_CHECK_TOOL(NM,nm,no)

dnl special treatment of ranlib
  RTEMS_CHECK_TOOL(RANLIB,ranlib,:)

dnl NOTE: These may not be available if not using gnutools
  RTEMS_CHECK_TOOL(OBJCOPY,objcopy,no)
  RTEMS_CHECK_TOOL(SIZE,size,no)
  RTEMS_CHECK_TOOL(STRIP,strip,:)
])

dnl $Id: check-tool.m4,v 1.2.4.1 2004/08/18 07:23:00 ralf Exp $

dnl RTEMS_CHECK_TOOL(VARIABLE, PROG-TO-CHECK-FOR[, VALUE-IF-NOT-FOUND [, PATH]])
AC_DEFUN([RTEMS_CHECK_TOOL],
[
  AS_IF([test "x$build_alias" != "x$host_alias"],
    [rtems_tool_prefix=${ac_tool_prefix}])
  AC_CHECK_PROG($1, ${rtems_tool_prefix}$2, ${rtems_tool_prefix}$2, $3, $4)
])


AC_DEFUN([_RTEMS_FLAGS],[
AS_IF([test -n "[$]{$1}"],
  [RTEMS_$1=[$]{$1}],
  [RTEMS_$1=$2])
AC_SUBST([RTEMS_$1])
])

dnl
dnl $Id: gcc-isystem.m4,v 1.1.2.2 2004/08/18 07:23:00 ralf Exp $
dnl
dnl Check whether the gcc accepts -isystem
dnl

AC_DEFUN([RTEMS_GCC_ISYSTEM],
[AC_REQUIRE([RTEMS_PROG_CC])
AC_CACHE_CHECK(whether $CC accepts -isystem,rtems_cv_gcc_isystem,
[
rtems_cv_gcc_isystem=no
if test x"$GCC" = x"yes"; then
cat << EOF > conftest.h
int conftest123();
EOF
cat << EOF > conftest.c
#include <conftest.h>
int conftest123() {}
EOF
  if test -z "`${CC} -isystem./ -c conftest.c 2>&1`";then
    rtems_cv_gcc_isystem=yes
  fi
fi
rm -f conftest*
])])

dnl
dnl $Id: gcc-pipe.m4,v 1.8.6.1 2004/08/18 07:23:00 ralf Exp $
dnl
dnl Check whether the target compiler accepts -pipe
dnl

AC_DEFUN([RTEMS_GCC_PIPE],
[AC_REQUIRE([RTEMS_PROG_CC]) 
AC_REQUIRE([AC_CANONICAL_HOST])
AC_CACHE_CHECK(whether $CC accepts --pipe,rtems_cv_gcc_pipe,
[
rtems_cv_gcc_pipe=no
if test x"$GCC" = x"yes"; then
    echo 'void f(){}' >conftest.c
    if test -z "`${CC} --pipe -c conftest.c 2>&1`";then
      rtems_cv_gcc_pipe=yes
    fi
    rm -f conftest*
fi
])
])

dnl
dnl $Id: gcc-specs.m4,v 1.5.6.1 2004/08/18 07:23:00 ralf Exp $
dnl
dnl Check whether the target compiler accepts -specs
dnl

AC_DEFUN([RTEMS_GCC_SPECS],
[AC_REQUIRE([RTEMS_PROG_CC])
AC_CACHE_CHECK(whether $CC accepts -specs,rtems_cv_gcc_specs,
[
rtems_cv_gcc_specs=no
if test x"$GCC" = x"yes"; then
  touch confspec
  echo 'void f(){}' >conftest.c
  if test -z "`${CC} -specs confspec -c conftest.c 2>&1`";then
    rtems_cv_gcc_specs=yes
  fi
fi
rm -f confspec conftest*
])])

dnl $Id: bsp-arg-enable.m4,v 1.2.6.1 2004/08/18 07:23:00 ralf Exp $
dnl
dnl RTEMS_BSP_ARG_ENABLE(FEATURE, HELP-STRING, ACTION-IF-TRUE [, ACTION-IF-FALSE])
dnl 
dnl Accept --enable-FEATURE=<RTEMS_BSP>:<bsp-value> and 
dnl --enable-FEATURE=<value> in BSP-configure scripts.
dnl
dnl Configure scripts will receive <bsp-value> if <RTEMS_BSP> matches the 
dnl actual value of the shell variable RTEMS_BSP (cf. RTEMS_ENV_RTEMSBSP), 
dnl and the raw value passed to --enable-FEATURE otherwise.
dnl
AC_DEFUN([RTEMS_BSP_ARG_ENABLE],
[AC_REQUIRE([RTEMS_ENV_RTEMSBSP])
AC_ARG_ENABLE([$1],[$2],
[enableval=`echo "[$enable_]patsubst([$1], -, _)" | sed -e "s%^${RTEMS_BSP}:%%"`
  eval "[enable_]patsubst([$1], -, _)='$enableval'"
$3],[$4])
])

dnl $Id: bspopts.m4,v 1.1 2001/11/14 18:57:26 joel Exp $
dnl

dnl RTEMS_BSPOPTS_* - some autoconf voodoo to handle default values and
dnl help-strings for per-BSP-environment variables.

dnl To be used in bsp-configure scripts


dnl Example:
dnl
dnl RTEMS_BSPOPTS_SET([foo],[bar],[0])
dnl RTEMS_BSPOPTS_SET([foo],[baz*],[hello])
dnl RTEMS_BSPOPTS_SET([foo],[*],[])
dnl RTEMS_BSPOPTS_HELP([foo],[env. variable foo])
dnl -> Add "0" as default value of variable "foo" for BSP "bar"
dnl -> Add "hello" as default value of variable "foo" for all BSPs starting
dnl with "baz" in their name.
dnl -> Undefine foo as default clause for all BSP's.
dnl
dnl All this basically expands to a /bin/shell "case"-statement with
dnl accompanying autoconf magic to propagate VAR to bspopts.h.


dnl RTEMS_BSPOPTS_HELP(VAR,HELP-STRING)
dnl Set up printing the HELP-STRING for bspopts.h's variable VAR and add
dnl appropriate /bin/sh-magic to "configure" to have VAR set up.

AC_DEFUN([RTEMS_BSPOPTS_HELP],[
RTEMS_ARG_VAR([$1],[$2])
m4_ifdef([_$1],[
case ${RTEMS_BSP} in
_$1[]dnl
esac],[])
if test -n "[$]{$1}"; then[]dnl
AC_DEFINE_UNQUOTED([$1],
  [[$]$1],
  [$2])dnl
fi
])

dnl RTEMS_BSPOPTS_SET(VAR,BSP,DEFAULT)
dnl Set up a value DEFAULT to be used as default value for variable VAR for
dnl BSP in RTEMS_BSPOPTS_HELP.

dnl MUST be use in front of exactly _one_ corresponding RTEMS_BSPOPTS_HELP

AC_DEFUN([RTEMS_BSPOPTS_SET],[dnl
m4_append([_$1],
[$2 )
  $1=[$]{$1-$3} ;;
])
])


dnl RTEMS_ARG_VAR(VAR,HELP-STRING)
dnl An internal macros to have RTEMS_BSPOPTS_HELP's help string pretty
dnl printed with configure --help.
dnl Stripped down version of autoconf-2.52's AC_ARG_VAR.

AC_DEFUN([RTEMS_ARG_VAR],
[
m4_expand_once([m4_divert_once([HELP_VAR],
[AC_HELP_STRING([$1], [$2], [              ])])],
      [$0($1)])dnl
])