⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 tcp_input.c

📁 RTEMS (Real-Time Executive for Multiprocessor Systems) is a free open source real-time operating sys
💻 C
📖 第 1 页 / 共 5 页
字号:
					if (win < 2)						win = 2;					tp->snd_ssthresh = win * tp->t_maxseg;					tp->t_timer[TCPT_REXMT] = 0;					tp->t_rtt = 0;					tp->snd_nxt = ti->ti_ack;					tp->snd_cwnd = tp->t_maxseg;					(void) tcp_output(tp);					tp->snd_cwnd = tp->snd_ssthresh +					       tp->t_maxseg * tp->t_dupacks;					if (SEQ_GT(onxt, tp->snd_nxt))						tp->snd_nxt = onxt;					goto drop;				} else if (tp->t_dupacks > tcprexmtthresh) {					tp->snd_cwnd += tp->t_maxseg;					(void) tcp_output(tp);					goto drop;				}			} else				tp->t_dupacks = 0;			break;		}		/*		 * If the congestion window was inflated to account		 * for the other side's cached packets, retract it.		 */		if (tp->t_dupacks >= tcprexmtthresh &&		    tp->snd_cwnd > tp->snd_ssthresh)			tp->snd_cwnd = tp->snd_ssthresh;		tp->t_dupacks = 0;		if (SEQ_GT(ti->ti_ack, tp->snd_max)) {			tcpstat.tcps_rcvacktoomuch++;			goto dropafterack;		}		/*		 *  If we reach this point, ACK is not a duplicate,		 *     i.e., it ACKs something we sent.		 */		if (tp->t_flags & TF_NEEDSYN) {			/*			 * T/TCP: Connection was half-synchronized, and our			 * SYN has been ACK'd (so connection is now fully			 * synchronized).  Go to non-starred state,			 * increment snd_una for ACK of SYN, and check if			 * we can do window scaling.			 */			tp->t_flags &= ~TF_NEEDSYN;			tp->snd_una++;			/* Do window scaling? */			if ((tp->t_flags & (TF_RCVD_SCALE|TF_REQ_SCALE)) ==				(TF_RCVD_SCALE|TF_REQ_SCALE)) {				tp->snd_scale = tp->requested_s_scale;				tp->rcv_scale = tp->request_r_scale;			}		}process_ACK:		acked = ti->ti_ack - tp->snd_una;		tcpstat.tcps_rcvackpack++;		tcpstat.tcps_rcvackbyte += acked;		/*		 * If we have a timestamp reply, update smoothed		 * round trip time.  If no timestamp is present but		 * transmit timer is running and timed sequence		 * number was acked, update smoothed round trip time.		 * Since we now have an rtt measurement, cancel the		 * timer backoff (cf., Phil Karn's retransmit alg.).		 * Recompute the initial retransmit timer.		 */		if (to.to_flag & TOF_TS)			tcp_xmit_timer(tp, tcp_now - to.to_tsecr + 1);		else if (tp->t_rtt && SEQ_GT(ti->ti_ack, tp->t_rtseq))			tcp_xmit_timer(tp,tp->t_rtt);		/*		 * If all outstanding data is acked, stop retransmit		 * timer and remember to restart (more output or persist).		 * If there is more data to be acked, restart retransmit		 * timer, using current (possibly backed-off) value.		 */		if (ti->ti_ack == tp->snd_max) {			tp->t_timer[TCPT_REXMT] = 0;			needoutput = 1;		} else if (tp->t_timer[TCPT_PERSIST] == 0)			tp->t_timer[TCPT_REXMT] = tp->t_rxtcur;		/*		 * If no data (only SYN) was ACK'd,		 *    skip rest of ACK processing.		 */		if (acked == 0)			goto step6;		/*		 * When new data is acked, open the congestion window.		 * If the window gives us less than ssthresh packets		 * in flight, open exponentially (maxseg per packet).		 * Otherwise open linearly: maxseg per window		 * (maxseg^2 / cwnd per packet).		 */		{		register u_int cw = tp->snd_cwnd;		register u_int incr = tp->t_maxseg;		if (cw > tp->snd_ssthresh)			incr = incr * incr / cw;		tp->snd_cwnd = min(cw + incr, TCP_MAXWIN<<tp->snd_scale);		}		if (acked > so->so_snd.sb_cc) {			tp->snd_wnd -= so->so_snd.sb_cc;			sbdrop(&so->so_snd, (int)so->so_snd.sb_cc);			ourfinisacked = 1;		} else {			sbdrop(&so->so_snd, acked);			tp->snd_wnd -= acked;			ourfinisacked = 0;		}		if (so->so_snd.sb_flags & SB_NOTIFY)			sowwakeup(so);		tp->snd_una = ti->ti_ack;		if (SEQ_LT(tp->snd_nxt, tp->snd_una))			tp->snd_nxt = tp->snd_una;		switch (tp->t_state) {		/*		 * In FIN_WAIT_1 STATE in addition to the processing		 * for the ESTABLISHED state if our FIN is now acknowledged		 * then enter FIN_WAIT_2.		 */		case TCPS_FIN_WAIT_1:			if (ourfinisacked) {				/*				 * If we can't receive any more				 * data, then closing user can proceed.				 * Starting the timer is contrary to the				 * specification, but if we don't get a FIN				 * we'll hang forever.				 */				if (so->so_state & SS_CANTRCVMORE) {					soisdisconnected(so);					tp->t_timer[TCPT_2MSL] = tcp_maxidle;				}				tp->t_state = TCPS_FIN_WAIT_2;			}			break;	 	/*		 * In CLOSING STATE in addition to the processing for		 * the ESTABLISHED state if the ACK acknowledges our FIN		 * then enter the TIME-WAIT state, otherwise ignore		 * the segment.		 */		case TCPS_CLOSING:			if (ourfinisacked) {				tp->t_state = TCPS_TIME_WAIT;				tcp_canceltimers(tp);				/* Shorten TIME_WAIT [RFC-1644, p.28] */				if (tp->cc_recv != 0 &&				    tp->t_duration < TCPTV_MSL)					tp->t_timer[TCPT_2MSL] =					    tp->t_rxtcur * TCPTV_TWTRUNC;				else					tp->t_timer[TCPT_2MSL] = 2 * TCPTV_MSL;				soisdisconnected(so);			}			break;		/*		 * In LAST_ACK, we may still be waiting for data to drain		 * and/or to be acked, as well as for the ack of our FIN.		 * If our FIN is now acknowledged, delete the TCB,		 * enter the closed state and return.		 */		case TCPS_LAST_ACK:			if (ourfinisacked) {				tp = tcp_close(tp);				goto drop;			}			break;		/*		 * In TIME_WAIT state the only thing that should arrive		 * is a retransmission of the remote FIN.  Acknowledge		 * it and restart the finack timer.		 */		case TCPS_TIME_WAIT:			tp->t_timer[TCPT_2MSL] = 2 * TCPTV_MSL;			goto dropafterack;		}	}step6:	/*	 * Update window information.	 * Don't look at window if no ACK: TAC's send garbage on first SYN.	 */	if ((tiflags & TH_ACK) &&	    (SEQ_LT(tp->snd_wl1, ti->ti_seq) ||	    (tp->snd_wl1 == ti->ti_seq && (SEQ_LT(tp->snd_wl2, ti->ti_ack) ||	     (tp->snd_wl2 == ti->ti_ack && tiwin > tp->snd_wnd))))) {		/* keep track of pure window updates */		if (ti->ti_len == 0 &&		    tp->snd_wl2 == ti->ti_ack && tiwin > tp->snd_wnd)			tcpstat.tcps_rcvwinupd++;		tp->snd_wnd = tiwin;		tp->snd_wl1 = ti->ti_seq;		tp->snd_wl2 = ti->ti_ack;		if (tp->snd_wnd > tp->max_sndwnd)			tp->max_sndwnd = tp->snd_wnd;		needoutput = 1;	}	/*	 * Process segments with URG.	 */	if ((tiflags & TH_URG) && ti->ti_urp &&	    TCPS_HAVERCVDFIN(tp->t_state) == 0) {		/*		 * This is a kludge, but if we receive and accept		 * random urgent pointers, we'll crash in		 * soreceive.  It's hard to imagine someone		 * actually wanting to send this much urgent data.		 */		if (ti->ti_urp + so->so_rcv.sb_cc > sb_max) {			ti->ti_urp = 0;			/* XXX */			tiflags &= ~TH_URG;		/* XXX */			goto dodata;			/* XXX */		}		/*		 * If this segment advances the known urgent pointer,		 * then mark the data stream.  This should not happen		 * in CLOSE_WAIT, CLOSING, LAST_ACK or TIME_WAIT STATES since		 * a FIN has been received from the remote side.		 * In these states we ignore the URG.		 *		 * According to RFC961 (Assigned Protocols),		 * the urgent pointer points to the last octet		 * of urgent data.  We continue, however,		 * to consider it to indicate the first octet		 * of data past the urgent section as the original		 * spec states (in one of two places).		 */		if (SEQ_GT(ti->ti_seq+ti->ti_urp, tp->rcv_up)) {			tp->rcv_up = ti->ti_seq + ti->ti_urp;			so->so_oobmark = so->so_rcv.sb_cc +			    (tp->rcv_up - tp->rcv_nxt) - 1;			if (so->so_oobmark == 0)				so->so_state |= SS_RCVATMARK;			sohasoutofband(so);			tp->t_oobflags &= ~(TCPOOB_HAVEDATA | TCPOOB_HADDATA);		}		/*		 * Remove out of band data so doesn't get presented to user.		 * This can happen independent of advancing the URG pointer,		 * but if two URG's are pending at once, some out-of-band		 * data may creep in... ick.		 */		if (ti->ti_urp <= (u_long)ti->ti_len#ifdef SO_OOBINLINE		     && (so->so_options & SO_OOBINLINE) == 0#endif		     )			tcp_pulloutofband(so, ti, m);	} else		/*		 * If no out of band data is expected,		 * pull receive urgent pointer along		 * with the receive window.		 */		if (SEQ_GT(tp->rcv_nxt, tp->rcv_up))			tp->rcv_up = tp->rcv_nxt;dodata:							/* XXX */	/*	 * Process the segment text, merging it into the TCP sequencing queue,	 * and arranging for acknowledgment of receipt if necessary.	 * This process logically involves adjusting tp->rcv_wnd as data	 * is presented to the user (this happens in tcp_usrreq.c,	 * case PRU_RCVD).  If a FIN has already been received on this	 * connection then we just ignore the text.	 */	if ((ti->ti_len || (tiflags&TH_FIN)) &&	    TCPS_HAVERCVDFIN(tp->t_state) == 0) {		TCP_REASS(tp, ti, m, so, tiflags);		/*		 * Note the amount of data that peer has sent into		 * our window, in order to estimate the sender's		 * buffer size.		 */		len = so->so_rcv.sb_hiwat - (tp->rcv_adv - tp->rcv_nxt);	} else {		m_freem(m);		tiflags &= ~TH_FIN;	}	/*	 * If FIN is received ACK the FIN and let the user know	 * that the connection is closing.	 */	if (tiflags & TH_FIN) {		if (TCPS_HAVERCVDFIN(tp->t_state) == 0) {			socantrcvmore(so);			/*			 *  If connection is half-synchronized			 *  (ie NEEDSYN flag on) then delay ACK,			 *  so it may be piggybacked when SYN is sent.			 *  Otherwise, since we received a FIN then no			 *  more input can be expected, send ACK now.			 */			if (tp->t_flags & TF_NEEDSYN)				tp->t_flags |= TF_DELACK;			else				tp->t_flags |= TF_ACKNOW;			tp->rcv_nxt++;		}		switch (tp->t_state) {	 	/*		 * In SYN_RECEIVED and ESTABLISHED STATES		 * enter the CLOSE_WAIT state.		 */		case TCPS_SYN_RECEIVED:		case TCPS_ESTABLISHED:			tp->t_state = TCPS_CLOSE_WAIT;			break;	 	/*		 * If still in FIN_WAIT_1 STATE FIN has not been acked so		 * enter the CLOSING state.		 */		case TCPS_FIN_WAIT_1:			tp->t_state = TCPS_CLOSING;			break;	 	/*		 * In FIN_WAIT_2 state enter the TIME_WAIT state,		 * starting the time-wait timer, turning off the other		 * standard timers.		 */		case TCPS_FIN_WAIT_2:			tp->t_state = TCPS_TIME_WAIT;			tcp_canceltimers(tp);			/* Shorten TIME_WAIT [RFC-1644, p.28] */			if (tp->cc_recv != 0 &&			    tp->t_duration < TCPTV_MSL) {				tp->t_timer[TCPT_2MSL] =				    tp->t_rxtcur * TCPTV_TWTRUNC;				/* For transaction client, force ACK now. */				tp->t_flags |= TF_ACKNOW;			}			else				tp->t_timer[TCPT_2MSL] = 2 * TCPTV_MSL;			soisdisconnected(so);			break;		/*		 * In TIME_WAIT state restart the 2 MSL time_wait timer.		 */		case TCPS_TIME_WAIT:			tp->t_timer[TCPT_2MSL] = 2 * TCPTV_MSL;			break;		}	}#ifdef TCPDEBUG	if (so->so_options & SO_DEBUG)		tcp_trace(TA_INPUT, ostate, tp, &tcp_saveti, 0);#endif	/*	 * Return any desired output.	 */	if (needoutput || (tp->t_flags & TF_ACKNOW))		(void) tcp_output(tp);	return;dropafterack:	/*	 * Generate an ACK dropping incoming segment if it occupies	 * sequence space, where the ACK reflects our state.	 */	if (tiflags & TH_RST)		goto drop;#ifdef TCPDEBUG	if (so->so_options & SO_DEBUG)		tcp_trace(TA_DROP, ostate, tp, &tcp_saveti, 0);#endif	m_freem(m);	tp->t_flags |= TF_ACKNOW;	(void) tcp_output(tp);	return;dropwithreset:	/*	 * Generate a RST, dropping incoming segment.	 * Make ACK acceptable to originator of segment.	 * Don't bother to respond if destination was broadcast/multicast.	 */	if ((tiflags & TH_RST) || m->m_flags & (M_BCAST|M_MCAST) ||	    IN_MULTICAST(ntohl(ti->ti_dst.s_addr)))		goto drop;#ifdef TCPDEBUG	if (tp == 0 || (tp->t_inpcb->inp_socket->so_options & SO_DEBUG))		tcp_trace(TA_DROP, ostate, tp, &tcp_saveti, 0);#endif	if (tiflags & TH_ACK)		tcp_respond(tp, ti, m, (tcp_seq)0, ti->ti_ack, TH_RST);	else {		if (tiflags & TH_SYN)			ti->ti_len++;		tcp_respond(tp, ti, m, ti->ti_seq+ti->ti_len, (tcp_seq)0,		    TH_RST|TH_ACK);	}	/* destroy temporarily created socket */	if (dropsocket)		(void) soabort(so);	return;drop:	/*	 * Drop space held by incoming segment and return.	 */#ifdef TCPDEBUG	if (tp == 0 || (tp->t_inpcb->inp_socket->so_options & SO_DEBUG))		tcp_trace(TA_DROP, ostate, tp, &tcp_saveti, 0);#endif	m_freem(m);	/* destroy temporarily created socket */	if (dropsocket)		(void) soabort(so);	return;#ifndef TUBA_INCLUDE}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -