⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 in_pcb.c

📁 RTEMS (Real-Time Executive for Multiprocessor Systems) is a free open source real-time operating sys
💻 C
📖 第 1 页 / 共 2 页
字号:
/* * Copyright (c) 1982, 1986, 1991, 1993, 1995 *	The Regents of the University of California.  All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright *    notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright *    notice, this list of conditions and the following disclaimer in the *    documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software *    must display the following acknowledgement: *	This product includes software developed by the University of *	California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors *    may be used to endorse or promote products derived from this software *    without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * *	@(#)in_pcb.c	8.4 (Berkeley) 5/24/95 *	$Id: in_pcb.c,v 1.3 2003/01/03 18:09:25 joel Exp $ */#include <sys/param.h>#include <sys/queue.h>#include <sys/systm.h>#include <sys/malloc.h>#include <sys/mbuf.h>#include <sys/protosw.h>#include <sys/socket.h>#include <sys/socketvar.h>#include <sys/ioctl.h>#include <sys/errno.h>#include <sys/time.h>#include <sys/proc.h>#include <sys/kernel.h>#include <sys/sysctl.h>#include <net/if.h>#include <net/route.h>#include <netinet/in.h>#include <netinet/in_systm.h>#include <netinet/ip.h>#include <netinet/in_pcb.h>#include <netinet/in_var.h>#include <netinet/ip_var.h>struct	in_addr zeroin_addr;static void	 in_pcbinshash __P((struct inpcb *));static void	 in_rtchange __P((struct inpcb *, int));/* * These configure the range of local port addresses assigned to * "unspecified" outgoing connections/packets/whatever. */static int ipport_lowfirstauto  = IPPORT_RESERVED - 1;	/* 1023 */static int ipport_lowlastauto = IPPORT_RESERVEDSTART;	/* 600 */static int ipport_firstauto = IPPORT_RESERVED;		/* 1024 */static int ipport_lastauto  = IPPORT_USERRESERVED;	/* 5000 */static int ipport_hifirstauto = IPPORT_HIFIRSTAUTO;	/* 40000 */static int ipport_hilastauto  = IPPORT_HILASTAUTO;	/* 44999 */#define RANGECHK(var, min, max) \	if ((var) < (min)) { (var) = (min); } \	else if ((var) > (max)) { (var) = (max); }static intsysctl_net_ipport_check(SYSCTL_HANDLER_ARGS){	int error = sysctl_handle_int(oidp,		oidp->oid_arg1, oidp->oid_arg2, req);	if (!error) {		RANGECHK(ipport_lowfirstauto, 1, IPPORT_RESERVED - 1);		RANGECHK(ipport_lowlastauto, 1, IPPORT_RESERVED - 1);		RANGECHK(ipport_firstauto, IPPORT_RESERVED, USHRT_MAX);		RANGECHK(ipport_lastauto, IPPORT_RESERVED, USHRT_MAX);		RANGECHK(ipport_hifirstauto, IPPORT_RESERVED, USHRT_MAX);		RANGECHK(ipport_hilastauto, IPPORT_RESERVED, USHRT_MAX);	}	return error;}#undef RANGECHKSYSCTL_NODE(_net_inet_ip, IPPROTO_IP, portrange, CTLFLAG_RW, 0, "IP Ports");SYSCTL_PROC(_net_inet_ip_portrange, OID_AUTO, lowfirst, CTLTYPE_INT|CTLFLAG_RW,	   &ipport_lowfirstauto, 0, &sysctl_net_ipport_check, "I", "");SYSCTL_PROC(_net_inet_ip_portrange, OID_AUTO, lowlast, CTLTYPE_INT|CTLFLAG_RW,	   &ipport_lowlastauto, 0, &sysctl_net_ipport_check, "I", "");SYSCTL_PROC(_net_inet_ip_portrange, OID_AUTO, first, CTLTYPE_INT|CTLFLAG_RW,	   &ipport_firstauto, 0, &sysctl_net_ipport_check, "I", "");SYSCTL_PROC(_net_inet_ip_portrange, OID_AUTO, last, CTLTYPE_INT|CTLFLAG_RW,	   &ipport_lastauto, 0, &sysctl_net_ipport_check, "I", "");SYSCTL_PROC(_net_inet_ip_portrange, OID_AUTO, hifirst, CTLTYPE_INT|CTLFLAG_RW,	   &ipport_hifirstauto, 0, &sysctl_net_ipport_check, "I", "");SYSCTL_PROC(_net_inet_ip_portrange, OID_AUTO, hilast, CTLTYPE_INT|CTLFLAG_RW,	   &ipport_hilastauto, 0, &sysctl_net_ipport_check, "I", "");intin_pcballoc(so, pcbinfo)	struct socket *so;	struct inpcbinfo *pcbinfo;{	register struct inpcb *inp;	int s;	MALLOC(inp, struct inpcb *, sizeof(*inp), M_PCB, M_NOWAIT);	if (inp == NULL)		return (ENOBUFS);	bzero((caddr_t)inp, sizeof(*inp));	inp->inp_gencnt = ++pcbinfo->ipi_gencnt;	inp->inp_pcbinfo = pcbinfo;	inp->inp_socket = so;	s = splnet();	LIST_INSERT_HEAD(pcbinfo->listhead, inp, inp_list);	pcbinfo->ipi_count++;	in_pcbinshash(inp);	splx(s);	so->so_pcb = (caddr_t)inp;	return (0);}intin_pcbbind(inp, nam)	register struct inpcb *inp;	struct mbuf *nam;{	register struct socket *so = inp->inp_socket;	unsigned short *lastport;	struct sockaddr_in *sin;	u_short lport = 0;	int wild = 0, reuseport = (so->so_options & SO_REUSEPORT);	int error;	if (in_ifaddr == 0)		return (EADDRNOTAVAIL);	if (inp->inp_lport || inp->inp_laddr.s_addr != INADDR_ANY)		return (EINVAL);	if ((so->so_options & (SO_REUSEADDR|SO_REUSEPORT)) == 0 &&	    ((so->so_proto->pr_flags & PR_CONNREQUIRED) == 0 ||	     (so->so_options & SO_ACCEPTCONN) == 0))		wild = 1;	if (nam) {		sin = mtod(nam, struct sockaddr_in *);		if (nam->m_len != sizeof (*sin))			return (EINVAL);#ifdef notdef		/*		 * We should check the family, but old programs		 * incorrectly fail to initialize it.		 */		if (sin->sin_family != AF_INET)			return (EAFNOSUPPORT);#endif		lport = sin->sin_port;		if (IN_MULTICAST(ntohl(sin->sin_addr.s_addr))) {			/*			 * Treat SO_REUSEADDR as SO_REUSEPORT for multicast;			 * allow complete duplication of binding if			 * SO_REUSEPORT is set, or if SO_REUSEADDR is set			 * and a multicast address is bound on both			 * new and duplicated sockets.			 */			if (so->so_options & SO_REUSEADDR)				reuseport = SO_REUSEADDR|SO_REUSEPORT;		} else if (sin->sin_addr.s_addr != INADDR_ANY) {			sin->sin_port = 0;		/* yech... */			if (ifa_ifwithaddr((struct sockaddr *)sin) == 0)				return (EADDRNOTAVAIL);		}		if (lport) {			struct inpcb *t;			/* GROSS */			if (ntohs(lport) < IPPORT_RESERVED &&			    (error = suser(p->p_ucred, &p->p_acflag)))				return (EACCES);			if (so->so_uid) {				t = in_pcblookup(inp->inp_pcbinfo, zeroin_addr,				    0, sin->sin_addr, lport,				    INPLOOKUP_WILDCARD);				if (t && (so->so_uid != t->inp_socket->so_uid))					return (EADDRINUSE);			}			t = in_pcblookup(inp->inp_pcbinfo, zeroin_addr, 0,			    sin->sin_addr, lport, wild);			if (t && (reuseport & t->inp_socket->so_options) == 0)				return (EADDRINUSE);		}		inp->inp_laddr = sin->sin_addr;	}	if (lport == 0) {		ushort first, last;		int count;		inp->inp_flags |= INP_ANONPORT;		if (inp->inp_flags & INP_HIGHPORT) {			first = ipport_hifirstauto;	/* sysctl */			last  = ipport_hilastauto;			lastport = &inp->inp_pcbinfo->lasthi;		} else if (inp->inp_flags & INP_LOWPORT) {			if ((error = suser(p->p_ucred, &p->p_acflag)))				return (EACCES);			first = ipport_lowfirstauto;	/* 1023 */			last  = ipport_lowlastauto;	/* 600 */			lastport = &inp->inp_pcbinfo->lastlow;		} else {			first = ipport_firstauto;	/* sysctl */			last  = ipport_lastauto;			lastport = &inp->inp_pcbinfo->lastport;		}		/*		 * Simple check to ensure all ports are not used up causing		 * a deadlock here.		 *		 * We split the two cases (up and down) so that the direction		 * is not being tested on each round of the loop.		 */		if (first > last) {			/*			 * counting down			 */			count = first - last;			do {				if (count-- <= 0)	/* completely used? */					return (EADDRNOTAVAIL);				--*lastport;				if (*lastport > first || *lastport < last)					*lastport = first;				lport = htons(*lastport);			} while (in_pcblookup(inp->inp_pcbinfo,				 zeroin_addr, 0, inp->inp_laddr, lport, wild));		} else {			/*			 * counting up			 */			count = last - first;			do {				if (count-- <= 0)	/* completely used? */					return (EADDRNOTAVAIL);				++*lastport;				if (*lastport < first || *lastport > last)					*lastport = first;				lport = htons(*lastport);			} while (in_pcblookup(inp->inp_pcbinfo,				 zeroin_addr, 0, inp->inp_laddr, lport, wild));		}	}	inp->inp_lport = lport;	in_pcbrehash(inp);	return (0);}/* *   Transform old in_pcbconnect() into an inner subroutine for new *   in_pcbconnect(): Do some validity-checking on the remote *   address (in mbuf 'nam') and then determine local host address *   (i.e., which interface) to use to access that remote host. * *   This preserves definition of in_pcbconnect(), while supporting a *   slightly different version for T/TCP.  (This is more than *   a bit of a kludge, but cleaning up the internal interfaces would *   have forced minor changes in every protocol). */intin_pcbladdr(inp, nam, plocal_sin)	register struct inpcb *inp;	struct mbuf *nam;	struct sockaddr_in **plocal_sin;{	struct in_ifaddr *ia;	register struct sockaddr_in *sin = mtod(nam, struct sockaddr_in *);	if (nam->m_len != sizeof (*sin))		return (EINVAL);	if (sin->sin_family != AF_INET)		return (EAFNOSUPPORT);	if (sin->sin_port == 0)		return (EADDRNOTAVAIL);	if (in_ifaddr) {		/*		 * If the destination address is INADDR_ANY,		 * use the primary local address.		 * If the supplied address is INADDR_BROADCAST,		 * and the primary interface supports broadcast,		 * choose the broadcast address for that interface.		 */#define	satosin(sa)	((struct sockaddr_in *)(sa))#define sintosa(sin)	((struct sockaddr *)(sin))#define ifatoia(ifa)	((struct in_ifaddr *)(ifa))		if (sin->sin_addr.s_addr == INADDR_ANY)		    sin->sin_addr = IA_SIN(in_ifaddr)->sin_addr;		else if (sin->sin_addr.s_addr == (u_long)INADDR_BROADCAST &&		  (in_ifaddr->ia_ifp->if_flags & IFF_BROADCAST))		    sin->sin_addr = satosin(&in_ifaddr->ia_broadaddr)->sin_addr;	}	if (inp->inp_laddr.s_addr == INADDR_ANY) {		register struct route *ro;		ia = (struct in_ifaddr *)0;		/*		 * If route is known or can be allocated now,		 * our src addr is taken from the i/f, else punt.		 */		ro = &inp->inp_route;		if (ro->ro_rt &&		    (satosin(&ro->ro_dst)->sin_addr.s_addr !=			sin->sin_addr.s_addr ||		    inp->inp_socket->so_options & SO_DONTROUTE)) {			RTFREE(ro->ro_rt);			ro->ro_rt = (struct rtentry *)0;		}		if ((inp->inp_socket->so_options & SO_DONTROUTE) == 0 && /*XXX*/		    (ro->ro_rt == (struct rtentry *)0 ||		    ro->ro_rt->rt_ifp == (struct ifnet *)0)) {			/* No route yet, so try to acquire one */			ro->ro_dst.sa_family = AF_INET;			ro->ro_dst.sa_len = sizeof(struct sockaddr_in);			((struct sockaddr_in *) &ro->ro_dst)->sin_addr =				sin->sin_addr;			rtalloc(ro);		}		/*		 * If we found a route, use the address		 * corresponding to the outgoing interface		 * unless it is the loopback (in case a route		 * to our address on another net goes to loopback).		 */		if (ro->ro_rt && !(ro->ro_rt->rt_ifp->if_flags & IFF_LOOPBACK))			ia = ifatoia(ro->ro_rt->rt_ifa);		if (ia == 0) {			u_short fport = sin->sin_port;			sin->sin_port = 0;			ia = ifatoia(ifa_ifwithdstaddr(sintosa(sin)));			if (ia == 0)				ia = ifatoia(ifa_ifwithnet(sintosa(sin)));			sin->sin_port = fport;			if (ia == 0)				ia = in_ifaddr;			if (ia == 0)				return (EADDRNOTAVAIL);		}		/*		 * If the destination address is multicast and an outgoing		 * interface has been set as a multicast option, use the		 * address of that interface as our source address.		 */		if (IN_MULTICAST(ntohl(sin->sin_addr.s_addr)) &&		    inp->inp_moptions != NULL) {			struct ip_moptions *imo;			struct ifnet *ifp;			imo = inp->inp_moptions;			if (imo->imo_multicast_ifp != NULL) {				ifp = imo->imo_multicast_ifp;				for (ia = in_ifaddr; ia; ia = ia->ia_next)					if (ia->ia_ifp == ifp)						break;				if (ia == 0)					return (EADDRNOTAVAIL);

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -