⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 res_init.c

📁 RTEMS (Real-Time Executive for Multiprocessor Systems) is a free open source real-time operating sys
💻 C
📖 第 1 页 / 共 2 页
字号:
/* * Copyright (c) 1985, 1989, 1993 *    The Regents of the University of California.  All rights reserved. *  * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright *    notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright *    notice, this list of conditions and the following disclaimer in the *    documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software *    must display the following acknowledgement: * 	This product includes software developed by the University of * 	California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors *    may be used to endorse or promote products derived from this software *    without specific prior written permission. *  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. *//* * Portions Copyright (c) 1993 by Digital Equipment Corporation. *  * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies, and that * the name of Digital Equipment Corporation not be used in advertising or * publicity pertaining to distribution of the document or software without * specific, written prior permission. *  * THE SOFTWARE IS PROVIDED "AS IS" AND DIGITAL EQUIPMENT CORP. DISCLAIMS ALL * WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS.   IN NO EVENT SHALL DIGITAL EQUIPMENT * CORPORATION BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS * SOFTWARE. *//* * Portions Copyright (c) 1996 by Internet Software Consortium. * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM DISCLAIMS * ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL INTERNET SOFTWARE * CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS * SOFTWARE. */#if defined(LIBC_SCCS) && !defined(lint)static char sccsid[] = "@(#)res_init.c	8.1 (Berkeley) 6/7/93";static char orig_rcsid[] = "From: Id: res_init.c,v 8.7 1996/11/18 09:10:04 vixie Exp $";static char rcsid[] = "$Id: res_init.c,v 1.4 2000/11/27 17:03:22 joel Exp $";#endif /* LIBC_SCCS and not lint */#include <sys/types.h>#include <sys/param.h>#include <sys/socket.h>#include <sys/time.h>#include <netinet/in.h>#include <arpa/inet.h>#include <arpa/nameser.h>#include <ctype.h>#include <resolv.h>#include <stdio.h>#include <stdlib.h>#include <string.h>#include <unistd.h>#include "res_config.h"/* * RTEMS -- set up name servers from global variable */#include <rtems/rtems_bsdnet_internal.h>static void res_setoptions __P((char *, char *));#ifdef RESOLVSORTstatic const char sort_mask[] = "/&";#define ISSORTMASK(ch) (strchr(sort_mask, ch) != NULL)static u_int32_t net_mask __P((struct in_addr));#endif#if !defined(isascii) /* XXX - could be a function */# define isascii(c) (!(c & 0200))#endif/* * Resolver state default settings. */struct __res_state _res# if defined(__BIND_RES_TEXT)	= { RES_TIMEOUT, }	/* Motorola, et al. */# endif	;/* * Set up default settings.  If the configuration file exist, the values * there will have precedence.  Otherwise, the server address is set to * INADDR_ANY and the default domain name comes from the gethostname(). * * An interrim version of this code (BIND 4.9, pre-4.4BSD) used 127.0.0.1 * rather than INADDR_ANY ("0.0.0.0") as the default name server address * since it was noted that INADDR_ANY actually meant ``the first interface * you "ifconfig"'d at boot time'' and if this was a SLIP or PPP interface, * it had to be "up" in order for you to reach your own name server.  It * was later decided that since the recommended practice is to always  * install local static routes through 127.0.0.1 for all your network * interfaces, that we could solve this problem without a code change. * * The configuration file should always be used, since it is the only way * to specify a default domain.  If you are running a server on your local * machine, you should say "nameserver 0.0.0.0" or "nameserver 127.0.0.1" * in the configuration file. * * Return 0 if completes successfully, -1 on error */intres_init(){	register FILE *fp;	register char *cp, **pp;	register int n;	char buf[MAXDNAME];	int nserv = 0;    /* number of nameserver records read from file */	int haveenv = 0;	int havesearch = 0;#ifdef RESOLVSORT	int nsort = 0;	char *net;#endif#ifndef RFC1535	int dots;#endif	/*	 * These three fields used to be statically initialized.  This made	 * it hard to use this code in a shared library.  It is necessary,	 * now that we're doing dynamic initialization here, that we preserve	 * the old semantics: if an application modifies one of these three	 * fields of _res before res_init() is called, res_init() will not	 * alter them.  Of course, if an application is setting them to	 * _zero_ before calling res_init(), hoping to override what used	 * to be the static default, we can't detect it and unexpected results	 * will follow.  Zero for any of these fields would make no sense,	 * so one can safely assume that the applications were already getting	 * unexpected results.	 *	 * _res.options is tricky since some apps were known to diddle the bits	 * before res_init() was first called. We can't replicate that semantic	 * with dynamic initialization (they may have turned bits off that are	 * set in RES_DEFAULT).  Our solution is to declare such applications	 * "broken".  They could fool us by setting RES_INIT but none do (yet).	 */	if (!_res.retrans)		_res.retrans = RES_TIMEOUT;	if (!_res.retry)		_res.retry = 4;	if (!(_res.options & RES_INIT))		_res.options = RES_DEFAULT;	/*	 * This one used to initialize implicitly to zero, so unless the app	 * has set it to something in particular, we can randomize it now.	 */	if (!_res.id)		_res.id = res_randomid();#ifdef USELOOPBACK	_res.nsaddr.sin_addr = inet_makeaddr(IN_LOOPBACKNET, 1);#else	_res.nsaddr.sin_addr.s_addr = INADDR_ANY;#endif	_res.nsaddr.sin_family = AF_INET;	_res.nsaddr.sin_port = htons(NAMESERVER_PORT);	_res.nscount = 1;	_res.ndots = 1;	_res.pfcode = 0;	/*	 * RTEMS -- Set up name servers	 */	{	int n = 0;	while ((n < rtems_bsdnet_nameserver_count) && (nserv < MAXNS)) {		_res.nsaddr_list[nserv].sin_addr = rtems_bsdnet_nameserver[n];		_res.nsaddr_list[nserv].sin_family = AF_INET;		_res.nsaddr_list[nserv].sin_port = htons(NAMESERVER_PORT);		nserv++;		n++;	}	if (rtems_bsdnet_domain_name)		(void)strncpy(_res.defdname, rtems_bsdnet_domain_name, sizeof(_res.defdname) - 1);	}	/* Allow user to override the local domain definition */	if ((cp = getenv("LOCALDOMAIN")) != NULL) {		(void)strncpy(_res.defdname, cp, sizeof(_res.defdname) - 1);		haveenv++;		/*		 * Set search list to be blank-separated strings		 * from rest of env value.  Permits users of LOCALDOMAIN		 * to still have a search list, and anyone to set the		 * one that they want to use as an individual (even more		 * important now that the rfc1535 stuff restricts searches)		 */		cp = _res.defdname;		pp = _res.dnsrch;		*pp++ = cp;		for (n = 0; *cp && pp < _res.dnsrch + MAXDNSRCH; cp++) {			if (*cp == '\n')	/* silly backwards compat */				break;			else if (*cp == ' ' || *cp == '\t') {				*cp = 0;				n = 1;			} else if (n) {				*pp++ = cp;				n = 0;				havesearch = 1;			}		}		/* null terminate last domain if there are excess */		while (*cp != '\0' && *cp != ' ' && *cp != '\t' && *cp != '\n')			cp++;		*cp = '\0';		*pp++ = 0;

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -