makefile.in

RTEMS (Real-Time Executive for Multiprocessor Systems) is a free open source real-time operating sys

	@$(NORMAL_UNINSTALL)
	@list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.3*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    3*) ;; \
	    *) ext='3' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f $(DESTDIR)$(man3dir)/$$inst"; \
	  rm -f $(DESTDIR)$(man3dir)/$$inst; \
	done

man5dir = $(mandir)/man5
install-man5: $(man5_MANS) $(man_MANS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(man5dir)
	@list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.5*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
	  else file=$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    5*) ;; \
	    *) ext='5' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man5dir)/$$inst"; \
	  $(INSTALL_DATA) $$file $(DESTDIR)$(man5dir)/$$inst; \
	done
uninstall-man5:
	@$(NORMAL_UNINSTALL)
	@list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.5*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    5*) ;; \
	    *) ext='5' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f $(DESTDIR)$(man5dir)/$$inst"; \
	  rm -f $(DESTDIR)$(man5dir)/$$inst; \
	done

man8dir = $(mandir)/man8
install-man8: $(man8_MANS) $(man_MANS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(man8dir)
	@list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.8*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
	  else file=$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    8*) ;; \
	    *) ext='8' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man8dir)/$$inst"; \
	  $(INSTALL_DATA) $$file $(DESTDIR)$(man8dir)/$$inst; \
	done
uninstall-man8:
	@$(NORMAL_UNINSTALL)
	@list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.8*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    8*) ;; \
	    *) ext='8' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f $(DESTDIR)$(man8dir)/$$inst"; \
	  rm -f $(DESTDIR)$(man8dir)/$$inst; \
	done
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:

DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

top_distdir = ../..
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)

distdir: $(DISTFILES)
	$(mkinstalldirs) $(distdir)/../../../automake $(distdir)/PSD.doc
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkinstalldirs) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-am
all-am: Makefile $(MANS) all-local

installdirs:
	$(mkinstalldirs) $(DESTDIR)$(man1dir) $(DESTDIR)$(man3dir) $(DESTDIR)$(man5dir) $(DESTDIR)$(man8dir)

install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-local mostlyclean-am

distclean: distclean-am

distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

info: info-am

info-am:

install-data-am: install-man

install-exec-am:

install-info: install-info-am

install-man: install-man1 install-man3 install-man5 install-man8

installcheck-am:

maintainer-clean: maintainer-clean-am

maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-info-am uninstall-man

uninstall-man: uninstall-man1 uninstall-man3 uninstall-man5 \
	uninstall-man8

.PHONY: all all-am all-local check check-am clean clean-generic \
	clean-local distclean distclean-generic distdir dvi dvi-am info \
	info-am install install-am install-data install-data-am \
	install-exec install-exec-am install-info install-info-am \
	install-man install-man1 install-man3 install-man5 install-man8 \
	install-strip installcheck installcheck-am installdirs \
	maintainer-clean maintainer-clean-generic mostlyclean \
	mostlyclean-generic pdf pdf-am ps ps-am uninstall uninstall-am \
	uninstall-info-am uninstall-man uninstall-man1 uninstall-man3 \
	uninstall-man5 uninstall-man8


# Multilib support rules
.PHONY: all-multi install-multi mostlyclean-multi clean-multi distclean-multi \
	maintainer-clean-multi

@MULTILIB_TRUE@all-recursive: all-multi
@MULTILIB_TRUE@install-recursive: install-multi

@MULTILIB_TRUE@mostlyclean-recursive: mostlyclean-multi
@MULTILIB_TRUE@clean-recursive: clean-multi
@MULTILIB_TRUE@distclean-recursive: distclean-multi
@MULTILIB_TRUE@maintainer-clean-recursive: maintainer-clean-multi

@MULTILIB_TRUE@all-multi:
@MULTILIB_TRUE@	$(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do
@MULTILIB_TRUE@install-multi:
@MULTILIB_TRUE@	$(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do

@MULTILIB_TRUE@mostlyclean-multi:
@MULTILIB_TRUE@	$(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean
@MULTILIB_TRUE@clean-multi:
@MULTILIB_TRUE@	$(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean
@MULTILIB_TRUE@distclean-multi:
@MULTILIB_TRUE@	$(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean
@MULTILIB_TRUE@maintainer-clean-multi:
@MULTILIB_TRUE@	$(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean

${ARCH}/%.$(OBJEXT): %.c
	${COMPILE} -o $@ -c $<

${ARCH}/%.$(OBJEXT): %.S
	${CCASCOMPILE} -o $@ -c $<

# Make foo.rel from foo.$(OBJEXT)
${ARCH}/%.rel: ${ARCH}/%.$(OBJEXT)
	${make-rel}

# We deliberately don't have anything depend on the
# $(DEPEND) file; otherwise it will get rebuilt even
# on 'make clean'
#

@RTEMS_USE_GCC_TRUE@depend-gcc: $(C_FILES) $(CC_FILES) $(S_FILES)
@RTEMS_USE_GCC_TRUE@	$(COMPILE) -M   $^    |  \
@RTEMS_USE_GCC_TRUE@	sed -e 's?^\(.*\)\.o[ ]*:?$$(ARCH)/\1.o:?' \
@RTEMS_USE_GCC_TRUE@	    -e 's?$(ARCH)/?$$(ARCH)/?'   >$(DEPEND).tmp
@RTEMS_USE_GCC_TRUE@	mv $(DEPEND).tmp $(DEPEND)

# pull in dependencies if they exist  
@RTEMS_USE_GCC_TRUE@ifeq (${DEPEND},$(wildcard ${DEPEND}))
@RTEMS_USE_GCC_TRUE@include ${DEPEND}
@RTEMS_USE_GCC_TRUE@@ENDIF@
depend: depend-gcc

${ARCH}:
	mkdir ${ARCH}

define make-library
$(RM) $@
$(AR) $(ARFLAGS) $@ $^
$(RANLIB) $@
endef

$(project_libdir)$(MULTISUBDIR):
	@$(mkinstalldirs) $@

.PRECIOUS: $(LIB)

$(LIB): $(OBJS)
	$(make-library)
@HAS_NETWORKING_TRUE@all-local: $(ARCH) $(LIB)

debug:
	@echo
	@echo "\"make debug\" is obsolete, instead use:"
	@echo "	make VARIANT=DEBUG"
	@echo

.PHONY: debug

profile:
	@echo
	@echo "\"make profile\" is obsolete, instead use:"
	@echo "	make VARIANT=PROFILE"
	@echo

.PHONY: profile

preinstall-am: $(PREINSTALL_FILES)
preinstall: preinstall-am
.PHONY: preinstall preinstall-am

depend-am: depend-gcc
depend: depend-am
.PHONY: depend depend-am depend-gcc

clean-local:
	$(RM) -r o-optimize o-debug o-profile $(CLEANDIRS)
	$(RM) Depends-o-optimize.tmp Depends-o-debug.tmp Depends-o-profile.tmp
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: