📄 xkcon.map.rpt
字号:
; AUTO_CARRY_CHAINS ; ON ; AUTO_CARRY ;
; IGNORE_CARRY_BUFFERS ; OFF ; IGNORE_CARRY ;
; AUTO_CASCADE_CHAINS ; ON ; AUTO_CASCADE ;
; IGNORE_CASCADE_BUFFERS ; OFF ; IGNORE_CASCADE ;
; LPM_WIDTH ; 4 ; Untyped ;
; LPM_DIRECTION ; UP ; Untyped ;
; LPM_MODULUS ; 0 ; Untyped ;
; LPM_AVALUE ; UNUSED ; Untyped ;
; LPM_SVALUE ; UNUSED ; Untyped ;
; DEVICE_FAMILY ; MAX7000S ; Untyped ;
; CARRY_CHAIN ; MANUAL ; Untyped ;
; CARRY_CHAIN_LENGTH ; 48 ; CARRY_CHAIN_LENGTH ;
; NOT_GATE_PUSH_BACK ; ON ; NOT_GATE_PUSH_BACK ;
; CARRY_CNT_EN ; SMART ; Untyped ;
; LABWIDE_SCLR ; ON ; Untyped ;
; USE_NEW_VERSION ; TRUE ; Untyped ;
; CBXI_PARAMETER ; NOTHING ; Untyped ;
+------------------------+----------+-----------------------------------------+
Note: In order to hide this table in the UI and the text report file, please set the "Show Parameter Settings Tables in Synthesis Report" option in "Analysis and Synthesis Settings -> More Settings" to "Off".
+--------------------------------------------------------------------------+
; Parameter Settings for Inferred Entity Instance: lpm_counter:count_rtl_1 ;
+------------------------+----------+--------------------------------------+
; Parameter Name ; Value ; Type ;
+------------------------+----------+--------------------------------------+
; AUTO_CARRY_CHAINS ; ON ; AUTO_CARRY ;
; IGNORE_CARRY_BUFFERS ; OFF ; IGNORE_CARRY ;
; AUTO_CASCADE_CHAINS ; ON ; AUTO_CASCADE ;
; IGNORE_CASCADE_BUFFERS ; OFF ; IGNORE_CASCADE ;
; LPM_WIDTH ; 12 ; Untyped ;
; LPM_DIRECTION ; UP ; Untyped ;
; LPM_MODULUS ; 0 ; Untyped ;
; LPM_AVALUE ; UNUSED ; Untyped ;
; LPM_SVALUE ; UNUSED ; Untyped ;
; DEVICE_FAMILY ; MAX7000S ; Untyped ;
; CARRY_CHAIN ; MANUAL ; Untyped ;
; CARRY_CHAIN_LENGTH ; 48 ; CARRY_CHAIN_LENGTH ;
; NOT_GATE_PUSH_BACK ; ON ; NOT_GATE_PUSH_BACK ;
; CARRY_CNT_EN ; SMART ; Untyped ;
; LABWIDE_SCLR ; ON ; Untyped ;
; USE_NEW_VERSION ; TRUE ; Untyped ;
; CBXI_PARAMETER ; NOTHING ; Untyped ;
+------------------------+----------+--------------------------------------+
Note: In order to hide this table in the UI and the text report file, please set the "Show Parameter Settings Tables in Synthesis Report" option in "Analysis and Synthesis Settings -> More Settings" to "Off".
+------------------------------------------------------------------------+
; Parameter Settings for Inferred Entity Instance: lpm_add_sub:add_rtl_2 ;
+------------------------+-------------+---------------------------------+
; Parameter Name ; Value ; Type ;
+------------------------+-------------+---------------------------------+
; LPM_WIDTH ; 13 ; Untyped ;
; LPM_REPRESENTATION ; UNSIGNED ; Untyped ;
; LPM_DIRECTION ; ADD ; Untyped ;
; ONE_INPUT_IS_CONSTANT ; YES ; Untyped ;
; LPM_PIPELINE ; 0 ; Untyped ;
; MAXIMIZE_SPEED ; 5 ; Untyped ;
; REGISTERED_AT_END ; 0 ; Untyped ;
; OPTIMIZE_FOR_SPEED ; 9 ; Untyped ;
; USE_CS_BUFFERS ; 1 ; Untyped ;
; CARRY_CHAIN ; MANUAL ; Untyped ;
; CARRY_CHAIN_LENGTH ; 48 ; CARRY_CHAIN_LENGTH ;
; DEVICE_FAMILY ; MAX7000S ; Untyped ;
; USE_WYS ; OFF ; Untyped ;
; STYLE ; FAST ; Untyped ;
; CBXI_PARAMETER ; add_sub_7ph ; Untyped ;
; AUTO_CARRY_CHAINS ; ON ; AUTO_CARRY ;
; IGNORE_CARRY_BUFFERS ; OFF ; IGNORE_CARRY ;
; AUTO_CASCADE_CHAINS ; ON ; AUTO_CASCADE ;
; IGNORE_CASCADE_BUFFERS ; OFF ; IGNORE_CASCADE ;
+------------------------+-------------+---------------------------------+
Note: In order to hide this table in the UI and the text report file, please set the "Show Parameter Settings Tables in Synthesis Report" option in "Analysis and Synthesis Settings -> More Settings" to "Off".
+------------------------------------------------------------------------+
; Parameter Settings for Inferred Entity Instance: lpm_add_sub:add_rtl_3 ;
+------------------------+-------------+---------------------------------+
; Parameter Name ; Value ; Type ;
+------------------------+-------------+---------------------------------+
; LPM_WIDTH ; 5 ; Untyped ;
; LPM_REPRESENTATION ; UNSIGNED ; Untyped ;
; LPM_DIRECTION ; ADD ; Untyped ;
; ONE_INPUT_IS_CONSTANT ; YES ; Untyped ;
; LPM_PIPELINE ; 0 ; Untyped ;
; MAXIMIZE_SPEED ; 5 ; Untyped ;
; REGISTERED_AT_END ; 0 ; Untyped ;
; OPTIMIZE_FOR_SPEED ; 9 ; Untyped ;
; USE_CS_BUFFERS ; 1 ; Untyped ;
; CARRY_CHAIN ; MANUAL ; Untyped ;
; CARRY_CHAIN_LENGTH ; 48 ; CARRY_CHAIN_LENGTH ;
; DEVICE_FAMILY ; MAX7000S ; Untyped ;
; USE_WYS ; OFF ; Untyped ;
; STYLE ; FAST ; Untyped ;
; CBXI_PARAMETER ; add_sub_onh ; Untyped ;
; AUTO_CARRY_CHAINS ; ON ; AUTO_CARRY ;
; IGNORE_CARRY_BUFFERS ; OFF ; IGNORE_CARRY ;
; AUTO_CASCADE_CHAINS ; ON ; AUTO_CASCADE ;
; IGNORE_CASCADE_BUFFERS ; OFF ; IGNORE_CASCADE ;
+------------------------+-------------+---------------------------------+
Note: In order to hide this table in the UI and the text report file, please set the "Show Parameter Settings Tables in Synthesis Report" option in "Analysis and Synthesis Settings -> More Settings" to "Off".
+--------------------------------+
; Analysis & Synthesis Equations ;
+--------------------------------+
The equations can be found in D:/文档/相控改造/程序代码/CPLD/xkcon.map.eqn.
+-------------------------------+
; Analysis & Synthesis Messages ;
+-------------------------------+
Info: *******************************************************************
Info: Running Quartus II Analysis & Synthesis
Info: Version 5.0 Build 148 04/26/2005 SJ Full Version
Info: Processing started: Fri Dec 30 09:48:18 2005
Info: Command: quartus_map --read_settings_files=on --write_settings_files=off xkcon -c xkcon
Info: Found 2 design units, including 1 entities, in source file xkcon.vhd
Info: Found design unit 1: xkcon-bhv
Info: Found entity 1: xkcon
Info: Elaborating entity "xkcon" for the top level hierarchy
Info: VHDL Case Statement information at xkcon.vhd(144): OTHERS choice is never selected
Warning: VHDL Process Statement warning at xkcon.vhd(181): signal "port_no" is read inside the Process Statement but isn't in the Process Statement's sensivitity list
Warning: VHDL Process Statement warning at xkcon.vhd(181): signal "count_ad" is read inside the Process Statement but isn't in the Process Statement's sensivitity list
Warning: VHDL Process Statement warning at xkcon.vhd(182): signal "port_no" is read inside the Process Statement but isn't in the Process Statement's sensivitity list
Warning: VHDL Process Statement warning at xkcon.vhd(182): signal "count_ad" is read inside the Process Statement but isn't in the Process Statement's sensivitity list
Warning: VHDL Process Statement warning at xkcon.vhd(184): signal "port_no" is read inside the Process Statement but isn't in the Process Statement's sensivitity list
Warning: VHDL Process Statement warning at xkcon.vhd(184): signal "scan_cnt" is read inside the Process Statement but isn't in the Process Statement's sensivitity list
Warning: VHDL Process Statement warning at xkcon.vhd(185): signal "key_pressed" is read inside the Process Statement but isn't in the Process Statement's sensivitity list
Warning: VHDL Process Statement warning at xkcon.vhd(191): signal "internal_bus_in" is read inside the Process Statement but isn't in the Process Statement's sensivitity list
Warning: VHDL Process Statement warning at xkcon.vhd(218): signal "reset" is read inside the Process Statement but isn't in the Process Statement's sensivitity list
Info: Inferred 2 megafunctions from design logic
Info: Inferred lpm_counter megafunction (LPM_WIDTH=4) from the following logic: "scan_cnt[0]~4"
Info: Inferred lpm_counter megafunction (LPM_WIDTH=12) from the following logic: "count[0]~12"
Info: Found 1 design units, including 1 entities, in source file c:/altera/quartus50/libraries/megafunctions/lpm_counter.tdf
Info: Found entity 1: lpm_counter
Info: Found 1 design units, including 1 entities, in source file c:/altera/quartus50/libraries/megafunctions/lpm_add_sub.tdf
Info: Found entity 1: lpm_add_sub
Info: Found 1 design units, including 1 entities, in source file c:/altera/quartus50/libraries/megafunctions/addcore.tdf
Info: Found entity 1: addcore
Info: Found 1 design units, including 1 entities, in source file c:/altera/quartus50/libraries/megafunctions/a_csnbuffer.tdf
Info: Found entity 1: a_csnbuffer
Info: Found 1 design units, including 1 entities, in source file c:/altera/quartus50/libraries/megafunctions/look_add.tdf
Info: Found entity 1: look_add
Info: Found 1 design units, including 1 entities, in source file c:/altera/quartus50/libraries/megafunctions/altshift.tdf
Info: Found entity 1: altshift
Info: State machine "|xkcon|c_st" contains 5 states and 0 state bits
Info: Selected Auto state machine encoding method for state machine "|xkcon|c_st"
Info: Encoding result for state machine "|xkcon|c_st"
Info: Completed encoding using 3 state bits
Info: Encoded state bit "c_st~13"
Info: Encoded state bit "c_st~12"
Info: Encoded state bit "c_st~11"
Info: State "|xkcon|c_st.st0" uses code string "000"
Info: State "|xkcon|c_st.st1" uses code string "001"
Info: State "|xkcon|c_st.st2" uses code string "010"
Info: State "|xkcon|c_st.st3" uses code string "011"
Info: State "|xkcon|c_st.st4" uses code string "100"
Info: Ignored 19 buffer(s)
Info: Ignored 19 SOFT buffer(s)
Info: Duplicate registers merged to single register
Info: Duplicate register "\divider:count_divider[1]" merged to single register "clk2mhz"
Info: Registers with preset signals will power-up high
Info: Duplicate registers merged to single register
Info: Duplicate register "pwm_pinb~reg0" merged to single register "pwm_pina~reg0", power-up level changed
Info: Promoted pin-driven signal(s) to global signal
Info: Promoted clock signal driven by pin "clk8mhz" to global clock signal
Info: Implemented 186 device resources after synthesis - the final resource count might be different
Info: Implemented 11 input pins
Info: Implemented 33 output pins
Info: Implemented 8 bidirectional pins
Info: Implemented 112 macrocells
Info: Implemented 22 shareable expanders
Info: Quartus II Analysis & Synthesis was successful. 0 errors, 9 warnings
Info: Processing ended: Fri Dec 30 09:48:25 2005
Info: Elapsed time: 00:00:08
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -