📄 combine.map
字号:
**********************************************************************
PSDsoft Express Version 8.21
Output of PSD Fitter - Memory Map Report
**********************************************************************
PROJECT : combine DATE : 04/15/2006
DEVICE : uPSD3254A TIME : 11:19:25
**********************************************************************
==== Device Configuration ====
Data Bus Width : 8 bit
Security Protection : OFF
Main PSD flash memory will reside in this space at power-up : Program space
Secondary PSD flash memory will reside in this space at power-up : Data space
Flash Sector 0 is unprotected.
Flash Sector 1 is unprotected.
Flash Sector 2 is unprotected.
Flash Sector 3 is unprotected.
Flash Sector 4 is unprotected.
Flash Sector 5 is unprotected.
Flash Sector 6 is unprotected.
Flash Sector 7 is unprotected.
Flash Boot Sector 0 is unprotected.
Flash Boot Sector 1 is unprotected.
Flash Boot Sector 2 is unprotected.
Flash Boot Sector 3 is unprotected.
==== Memory Map Report ====
Total address field length available = 24 bits
Page register length = 8 bits
Natural address field length = 16 bits
Bits used for logic = 0 bits
Address Mask = 0x00FFFF
Available field xxxxxxxxxxxxxxxxxxxxxxxx
Hardware PPPPPPPPAAAAAAAAAAAAAAAA
Application usage AAAAAAAAAAAAAAAA
Label Page Bit start end Mem comments
y=page(don't care)
fs0 0byyyyyyyy 0x0000 0x7FFF F // & !pdn
fs1 0byyyyyyyy 0x8000 0xFFFF F // & !pdn
rs0 0byyyyyyyy 0x0200 0x81FF V // & !pdn
csiop 0byyyyyyyy 0x0000 0x00FF V // & !pdn
!LCD_EN 0byyyyyyyy 0x0100 0x0102 Peripheral // & !_wr
0byyyyyyyy 0x0100 0x0102 Peripheral // & !_rd
!EN922 0byyyyyyyy 0x010A 0x011F Peripheral // & !_rd
EN8870 0byyyyyyyy 0x0105 0x0106 Peripheral // & !_rd
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -