scsierrs.c

另一种方法编辑刻录程序的代码!要的与偶联系呀

/* @(#)scsierrs.c	2.15 98/03/05 Copyright 1987-1996 J. Schilling */
#ifndef lint
static	char sccsid[] =
	"@(#)scsierrs.c	2.15 98/03/05 Copyright 1987-1996 J. Schilling";
#endif
/*
 *	Error printing for scsitransp.c
 *
 *	Copyright (c) 1987-1996 J. Schilling
 */
/*
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2, or (at your option)
 * any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; see the file COPYING.  If not, write to
 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <mconfig.h>

#include <stdio.h>
#include <standard.h>

#include "scsireg.h"
#include "scsidefs.h"
#include "scgio.h"	/*XXX JS wird eigentlich nicht benoetigt!!	*/
			/*XXX JS kommt weg, wenn struct sense und status */
			/*XXX JS von scgio.h nach scsireg.h kommen	*/
#include "scsitransp.h"

#define	CTYPE_CCS	0
#define	CTYPE_MD21	1
#define	CTYPE_ACB4000	2
#define	CTYPE_SMO_C501	3

#define	SMO_C501

EXPORT	const char	*scsisensemsg	__PR((int, int, int,
						const char **, char *));
EXPORT	void		scsierrmsg	__PR((struct scsi_sense *,
						struct scsi_status *,
						int, const char **));
/*
 * Map old non extended sense to sense key.
 */
static u_char sd_adaptec_keys[] = {
	0, 4, 4, 4,  2, 2, 4, 4,		/* 0x00-0x07 */
	4, 4, 4, 4,  4, 4, 4, 4,		/* 0x08-0x0f */
	4, 3, 3, 3,  3, 4, 3, 1,		/* 0x10-0x17 */
	1, 1, 3, 4,  3, 4, 3, 3,		/* 0x18-0x1f */
	5, 5, 5, 5,  5, 5, 5, 7,		/* 0x20-0x27 */
	6, 6, 6, 5,  4,11,11,11			/* 0x28-0x2f */
};
#define	MAX_ADAPTEC_KEYS (sizeof (sd_adaptec_keys))

/*
 * Deviations to CCS found on old pre CCS devices
 */
static const char *sd_adaptec_error_str[] = {
	"\031\000ECC error during verify",		/* 0x19 */
	"\032\000interleave error",			/* 0x1a */
	"\034\000bad format on drive",			/* 0x1c */
	"\035\000self test failed",			/* 0x1d */
	"\036\000defective track",			/* 0x1e */
	"\043\000volume overflow",			/* 0x23 */
	"\053\000set limit violation",			/* 0x2b */
	"\054\000error counter overflow",		/* 0x2c */
	"\055\000initiator detected error",		/* 0x2d */
	"\056\000scsi parity error",			/* 0x2e */
	"\057\000adapter parity error",			/* 0x2f */
	NULL
};

/*
 * The sense codes of SCSI-1/CCS, SCSI-2 and SCSI-3 devices.
 */
static const char *sd_ccs_error_str[] = {
	"\000\000no additional sense information",		/* 00 00 */
	"\000\001filemark detected",				/* 00 01 */
	"\000\002end-of-partition/medium detected",		/* 00 02 */
	"\000\003setmark detected",				/* 00 03 */
	"\000\004beginning-of-partition/medium detected",	/* 00 04 */
	"\000\005end-of-data detected",				/* 00 05 */
	"\000\006i/o process terminated",			/* 00 06 */
	"\000\021audio play operation in progress",		/* 00 11 */
	"\000\022audio play operation paused",			/* 00 12 */
	"\000\023audio play operation successfully completed",	/* 00 13 */
	"\000\024audio play operation stopped due to error",	/* 00 14 */
	"\000\025no current audio status to return",		/* 00 15 */
	"\000\026operation in progress",			/* 00 16 */
	"\000\027cleaning requested",				/* 00 17 */
	"\001\000no index/sector signal",			/* 01 00 */
	"\002\000no seek complete",				/* 02 00 */
	"\003\000peripheral device write fault",		/* 03 00 */
	"\003\001no write current",				/* 03 01 */
	"\003\002excessive write errors",			/* 03 02 */
	"\004\000logical unit not ready, cause not reportable",	/* 04 00 */
	"\004\001logical unit is in process of becoming ready",	/* 04 01 */
	"\004\002logical unit not ready, initializing cmd. required",	/* 04 02 */
	"\004\003logical unit not ready, manual intervention required",	/* 04 03 */
	"\004\004logical unit not ready, format in progress",	/* 04 04 */
	"\004\005logical unit not ready, rebuild in progress",	/* 04 05 */
	"\004\006logical unit not ready, recalculation in progress",	/* 04 06 */
	"\004\007logical unit not ready, operation in progress",/* 04 07 */
	"\004\010logical unit not ready, long write in progress",	/* 04 08 */
	"\005\000logical unit does not respond to selection",	/* 05 00 */
	"\006\000no reference position found",			/* 06 00 */
	"\007\000multiple peripheral devices selected",		/* 07 00 */
	"\010\000logical unit communication failure",		/* 08 00 */
	"\010\001logical unit communication time-out",		/* 08 01 */
	"\010\002logical unit communication parity error",	/* 08 02 */
	"\010\003logical unit communication crc error (ultra-dma/32)",	/* 08 03 */
	"\011\000track following error",			/* 09 00 */
	"\011\001tracking servo failure",			/* 09 01 */
	"\011\002focus servo failure",				/* 09 02 */
	"\011\003spindle servo failure",			/* 09 03 */
	"\011\004head select fault",				/* 09 04 */
	"\012\000error log overflow",				/* 0A 00 */
	"\013\000warning",					/* 0B 00 */
	"\013\001warning - specified temperature exceeded",	/* 0B 01 */
	"\013\002warning - enclosure degraded",			/* 0B 02 */
	"\014\000write error",					/* 0C 00 */
	"\014\001write error - recovered with auto reallocation",	/* 0C 01 */
	"\014\002write error - auto reallocation failed",	/* 0C 02 */
	"\014\003write error - recommend reassignment",		/* 0C 03 */
	"\014\004compression check miscompare error",		/* 0C 04 */
	"\014\005data expansion occurred during compression",	/* 0C 05 */
	"\014\006block not compressible",			/* 0C 06 */
	"\014\007write error - recovery needed",		/* 0C 07 */
	"\014\010write error - recovery failed",		/* 0C 08 */
	"\014\011write error - loss of streaming",		/* 0C 09 */
	"\014\012write error - padding blocks added",		/* 0C 0A */
	"\020\000id crc or ecc error",				/* 10 00 */
	"\021\000unrecovered read error",			/* 11 00 */
	"\021\001read retries exhausted",			/* 11 01 */
	"\021\002error too long to correct",			/* 11 02 */
	"\021\003multiple read errors",				/* 11 03 */
	"\021\004unrecovered read error - auto reallocate failed",	/* 11 04 */
	"\021\005l-ec uncorrectable error",			/* 11 05 */
	"\021\006circ unrecovered error",			/* 11 06 */
	"\021\007data re-synchronization error",		/* 11 07 */
	"\021\010incomplete block read",			/* 11 08 */
	"\021\011no gap found",					/* 11 09 */
	"\021\012miscorrected error",				/* 11 0A */
	"\021\013unrecovered read error - recommend reassignment",	/* 11 0B */
	"\021\014unrecovered read error - recommend rewrite the data",	/* 11 0C */
	"\021\015de-compression crc error",			/* 11 0D */
	"\021\016cannot decompress using declared algorithm",	/* 11 0E */
	"\021\017error reading upc/ean number",			/* 11 0F */
	"\021\020error reading isrc number",			/* 11 10 */
	"\021\021read error - loss of streaming",		/* 11 11 */
	"\022\000address mark not found for id field",		/* 12 00 */
	"\023\000address mark not found for data field",	/* 13 00 */
	"\024\000recorded entity not found",			/* 14 00 */
	"\024\001record not found",				/* 14 01 */
	"\024\002filemark or setmark not found",		/* 14 02 */
	"\024\003end-of-data not found",			/* 14 03 */
	"\024\004block sequence error",				/* 14 04 */
	"\024\005record not found - recommend reassignment",	/* 14 05 */
	"\024\006record not found - data auto-reallocated",	/* 14 06 */
	"\025\000random positioning error",			/* 15 00 */
	"\025\001mechanical positioning error",			/* 15 01 */
	"\025\002positioning error detected by read of medium",	/* 15 02 */
	"\026\000data synchronization mark error",		/* 16 00 */
	"\026\001data sync error - data rewritten",		/* 16 01 */
	"\026\002data sync error - recommend rewrite",		/* 16 02 */
	"\026\003data sync error - data auto-reallocated",	/* 16 03 */
	"\026\004data sync error - recommend reassignment",	/* 16 04 */
	"\027\000recovered data with no error correction applied",	/* 17 00 */
	"\027\001recovered data with retries",			/* 17 01 */
	"\027\002recovered data with positive head offset",	/* 17 02 */
	"\027\003recovered data with negative head offset",	/* 17 03 */
	"\027\004recovered data with retries and/or circ applied",	/* 17 04 */
	"\027\005recovered data using previous sector id",	/* 17 05 */
	"\027\006recovered data without ecc - data auto-reallocated",	/* 17 06 */
	"\027\007recovered data without ecc - recommend reassignment",	/* 17 07 */
	"\027\010recovered data without ecc - recommend rewrite",	/* 17 08 */
	"\027\011recovered data without ecc - data rewritten",	/* 17 09 */
	"\030\000recovered data with error correction applied",	/* 18 00 */
	"\030\001recovered data with error corr. & retries applied",	/* 18 01 */
	"\030\002recovered data - data auto-reallocated",	/* 18 02 */
	"\030\003recovered data with circ",			/* 18 03 */
	"\030\004recovered data with l-ec",			/* 18 04 */
	"\030\005recovered data - recommend reassignment",	/* 18 05 */
	"\030\006recovered data - recommend rewrite",		/* 18 06 */
	"\030\007recovered data with ecc - data rewritten",	/* 18 07 */
	"\031\000defect list error",				/* 19 00 */
	"\031\001defect list not available",			/* 19 01 */
	"\031\002defect list error in primary list",		/* 19 02 */
	"\031\003defect list error in grown list",		/* 19 03 */
	"\032\000parameter list length error",			/* 1A 00 */
	"\033\000synchronous data transfer error",		/* 1B 00 */
	"\034\000defect list not found",			/* 1C 00 */
	"\034\001primary defect list not found",		/* 1C 01 */
	"\034\002grown defect list not found",			/* 1C 02 */
	"\035\000miscompare during verify operation",		/* 1D 00 */
	"\036\000recovered id with ecc correction",		/* 1E 00 */
	"\037\000partial defect list transfer",			/* 1F 00 */
	"\040\000invalid command operation code",		/* 20 00 */
	"\041\000logical block address out of range",		/* 21 00 */
	"\041\001invalid element address",			/* 21 01 */
	"\042\000illegal function (use 20 00, 24 00, or 26 00)",/* 22 00 */
	"\044\000invalid field in cdb",				/* 24 00 */
	"\045\000logical unit not supported",			/* 25 00 */
	"\046\000invalid field in parameter list",		/* 26 00 */
	"\046\001parameter not supported",			/* 26 01 */
	"\046\002parameter value invalid",			/* 26 02 */
	"\046\003threshold parameters not supported",		/* 26 03 */
	"\046\004invalid release of active persistent reservation",	/* 26 04 */
	"\047\000write protected",				/* 27 00 */
	"\047\001hardware write protected",			/* 27 01 */
	"\047\002logical unit software write protected",	/* 27 02 */
	"\047\003associated write protect",			/* 27 03 */
	"\047\004persistent write protect",			/* 27 04 */
	"\047\005permanent write protect",			/* 27 05 */
	"\050\000not ready to ready change, medium may have changed",	/* 28 00 */
	"\050\001import or export element accessed",		/* 28 01 */
	"\051\000power on, reset, or bus device reset occurred",/* 29 00 */
	"\051\001power on occurred",				/* 29 01 */
	"\051\002scsi bus reset occurred",			/* 29 02 */
	"\051\003bus device reset function occurred",		/* 29 03 */
	"\051\004device internal reset",			/* 29 04 */
	"\051\005transceiver mode changed to single-ended",	/* 29 05 */
	"\051\006transceiver mode changed to lvd",		/* 29 06 */
	"\052\000parameters changed",				/* 2A 00 */
	"\052\001mode parameters changed",			/* 2A 01 */
	"\052\002log parameters changed",			/* 2A 02 */
	"\052\003reservations preempted",			/* 2A 03 */
	"\053\000copy cannot execute since host cannot disconnect",	/* 2B 00 */
	"\054\000command sequence error",			/* 2C 00 */
	"\054\001too many windows specified",			/* 2C 01 */
	"\054\002invalid combination of windows specified",	/* 2C 02 */
	"\054\003current program area is not empty",		/* 2C 03 */
	"\054\004current program area is empty",		/* 2C 04 */
	"\055\000overwrite error on update in place",		/* 2D 00 */
	"\057\000commands cleared by another initiator",	/* 2F 00 */
	"\060\000incompatible medium installed",		/* 30 00 */
	"\060\001cannot read medium - unknown format",		/* 30 01 */
	"\060\002cannot read medium - incompatible format",	/* 30 02 */
	"\060\003cleaning cartridge installed",			/* 30 03 */
	"\060\004cannot write medium - unknown format",		/* 30 04 */
	"\060\005cannot write medium - incompatible format",	/* 30 05 */
	"\060\006cannot format medium - incompatible medium",	/* 30 06 */
	"\060\007cleaning failure",				/* 30 07 */
	"\060\010cannot write - application code mismatch",	/* 30 08 */
	"\060\011current session not fixated for append",	/* 30 09 */
	"\061\000medium format corrupted",			/* 31 00 */
	"\061\001format command failed",			/* 31 01 */
	"\062\000no defect spare location available",		/* 32 00 */
	"\062\001defect list update failure",			/* 32 01 */
	"\063\000tape length error",				/* 33 00 */
	"\064\000enclosure failure",				/* 34 00 */
	"\065\000enclosure services failure",			/* 35 00 */
	"\065\001unsupported enclosure function",		/* 35 01 */
	"\065\002enclosure services unavailable",		/* 35 02 */
	"\065\003enclosure services transfer failure",		/* 35 03 */
	"\065\004enclosure services transfer refused",		/* 35 04 */
	"\066\000ribbon, ink, or toner failure",		/* 36 00 */
	"\067\000rounded parameter",				/* 37 00 */
	"\071\000saving parameters not supported",		/* 39 00 */
	"\072\000medium not present",				/* 3A 00 */
	"\072\001medium not present - tray closed",		/* 3A 01 */
	"\072\002medium not present - tray open",		/* 3A 02 */
	"\073\000sequential positioning error",			/* 3B 00 */
	"\073\001tape position error at beginning-of-medium",	/* 3B 01 */
	"\073\002tape position error at end-of-medium",		/* 3B 02 */
	"\073\003tape or electronic vertical forms unit not ready",	/* 3B 03 */
	"\073\004slew failure",					/* 3B 04 */
	"\073\005paper jam",					/* 3B 05 */
	"\073\006failed to sense top-of-form",			/* 3B 06 */
	"\073\007failed to sense bottom-of-form",		/* 3B 07 */
	"\073\010reposition error",				/* 3B 08 */
	"\073\011read past end of medium",			/* 3B 09 */
	"\073\012read past beginning of medium",		/* 3B 0A */
	"\073\013position past end of medium",			/* 3B 0B */
	"\073\014position past beginning of medium",		/* 3B 0C */
	"\073\015medium destination element full",		/* 3B 0D */
	"\073\016medium source element empty",			/* 3B 0E */
	"\073\017end of medium reached",			/* 3B 0F */
	"\073\021medium magazine not accessible",		/* 3B 11 */
	"\073\022medium magazine removed",			/* 3B 12 */
	"\073\023medium magazine inserted",			/* 3B 13 */
	"\073\024medium magazine locked",			/* 3B 14 */
	"\073\025medium magazine unlocked",			/* 3B 15 */
	"\075\000invalid bits in identify message",		/* 3D 00 */
	"\076\000logical unit has not self-configured yet",	/* 3E 00 */
	"\076\001logical unit failure",				/* 3E 01 */
	"\076\002timeout on logical unit",			/* 3E 02 */
	"\077\000target operating conditions have changed",	/* 3F 00 */
	"\077\001microcode has been changed",			/* 3F 01 */
	"\077\002changed operating definition",			/* 3F 02 */
	"\077\003inquiry data has changed",			/* 3F 03 */
	"\100\000ram failure (should use 40 nn)",		/* 40 00 */
#ifdef	XXX
	"\100\000nn diagnostic failure on component nn (80h-ffh)",	/* 40 00 */
#endif
	"\101\000data path failure (should use 40 nn)",		/* 41 00 */
	"\102\000power-on or self-test failure (should use 40 nn)",	/* 42 00 */
	"\103\000message error",				/* 43 00 */
	"\104\000internal target failure",			/* 44 00 */
	"\105\000select or reselect failure",			/* 45 00 */
	"\106\000unsuccessful soft reset",			/* 46 00 */
	"\107\000scsi parity error",				/* 47 00 */
	"\110\000initiator detected error message received",	/* 48 00 */
	"\111\000invalid message error",			/* 49 00 */
	"\112\000command phase error",				/* 4A 00 */
	"\113\000data phase error",				/* 4B 00 */
	"\114\000logical unit failed self-configuration",	/* 4C 00 */
#ifdef	XXX
	"\115\000nn tagged overlapped commands (nn = queue tag)",	/* 4D 00 */
#endif
	"\116\000overlapped commands attempted",		/* 4E 00 */
	"\120\000write append error",				/* 50 00 */
	"\120\001write append position error",			/* 50 01 */
	"\120\002position error related to timing",		/* 50 02 */
	"\121\000erase failure",				/* 51 00 */
	"\122\000cartridge fault",				/* 52 00 */
	"\123\000media load or eject failed",			/* 53 00 */
	"\123\001unload tape failure",				/* 53 01 */
	"\123\002medium removal prevented",			/* 53 02 */
	"\124\000scsi to host system interface failure",	/* 54 00 */
	"\125\000system resource failure",			/* 55 00 */
	"\125\001system buffer full",				/* 55 01 */
	"\127\000unable to recover table-of-contents",		/* 57 00 */
	"\130\000generation does not exist",			/* 58 00 */
	"\131\000updated block read",				/* 59 00 */
	"\132\000operator request or state change input",	/* 5A 00 */
	"\132\001operator medium removal request",		/* 5A 01 */
	"\132\002operator selected write protect",		/* 5A 02 */
	"\132\003operator selected write permit",		/* 5A 03 */
	"\133\000log exception",				/* 5B 00 */
	"\133\001threshold condition met",			/* 5B 01 */
	"\133\002log counter at maximum",			/* 5B 02 */
	"\133\003log list codes exhausted",			/* 5B 03 */
	"\134\000rpl status change",				/* 5C 00 */
	"\134\001spindles synchronized",			/* 5C 01 */
	"\134\002spindles not synchronized",			/* 5C 02 */
	"\135\000failure prediction threshold exceeded",	/* 5D 00 */
	"\135\377failure prediction threshold exceeded (false)",/* 5D FF */
	"\136\000low power condition on",			/* 5E 00 */
	"\136\001idle condition activated by timer",		/* 5E 01 */
	"\136\002standby condition activated by timer",		/* 5E 02 */
	"\136\003idle condition activated by command",		/* 5E 03 */
	"\136\004standby condition activated by command",	/* 5E 04 */
	"\140\000lamp failure",					/* 60 00 */
	"\141\000video acquisition error",			/* 61 00 */
	"\141\001unable to acquire video",			/* 61 01 */
	"\141\002out of focus",					/* 61 02 */
	"\142\000scan head positioning error",			/* 62 00 */
	"\143\000end of user area encountered on this track",	/* 63 00 */
	"\143\001packet does not fit in available space",	/* 63 01 */
	"\144\000illegal mode for this track",			/* 64 00 */
	"\144\001invalid packet size",				/* 64 01 */
	"\145\000voltage fault",				/* 65 00 */
	"\146\000automatic document feeder cover up",		/* 66 00 */
	"\146\001automatic document feeder lift up",		/* 66 01 */
	"\146\002document jam in automatic document feeder",	/* 66 02 */
	"\146\003document miss feed automatic in document feeder",	/* 66 03 */
	"\147\000configuration failure",			/* 67 00 */
	"\147\001configuration of incapable logical units failed",	/* 67 01 */
	"\147\002add logical unit failed",			/* 67 02 */