📄 readme.fax
字号:
Fax with isdn4linux===================When enabled during kernel configuration, the tty emulatorof the ISDN subsystem is capable of the Fax Class 2 commands.This only makes sense under the following conditions :- You need the commands as dummy, because you are using hylafax (with patch) for AVM capi.- You want to use the fax capabilities of your isdn-card. (supported cards are listed below)NOTE: This implementation does *not* support fax with passive ISDN-cards (known as softfax). The low-level driver of the ISDN-card and/or the card itself must support this.Supported ISDN-Cards--------------------Eicon DIVA Server BRI/PCI - full support with both B-channels.Eicon DIVA Server 4BRI/PCI - full support with all B-channels.Eicon DIVA Server PRI/PCI - full support on amount of B-channels depending on DSPs on board.The command set is known as Class 2 (not Class 2.0) andcan be activated by AT+FCLASS=2The interface between the link-level-module and the hardware-level driveris described in the files INTERFACE.fax and INTERFACE.Arminmac@melware.de
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -