📄 ptrace.h
字号:
/* * include/asm-s390/ptrace.h * * S390 version * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation * Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com) */#ifndef _S390_PTRACE_H#define _S390_PTRACE_H#include <linux/config.h>#include <asm/s390-regs-common.h>#include <asm/current.h>#include <linux/types.h>#include <asm/setup.h>#include <linux/stddef.h>#define S390_REGS \S390_REGS_COMMON \__u32 orig_gpr2;typedef struct{ S390_REGS} s390_regs;struct pt_regs { S390_REGS __u32 trap;};#if CONFIG_REMOTE_DEBUGtypedef struct{ S390_REGS __u32 trap; __u32 crs[16]; s390_fp_regs fp_regs;} gdb_pt_regs;#endiftypedef struct{ __u32 cr[3];} per_cr_words __attribute__((packed));#define PER_EM_MASK 0xE8000000typedef struct{ unsigned em_branching:1; unsigned em_instruction_fetch:1; /* Switching on storage alteration automatically fixes the storage alteration event bit in the users std. */ unsigned em_storage_alteration:1; unsigned em_gpr_alt_unused:1; unsigned em_store_real_address:1; unsigned :3; unsigned branch_addr_ctl:1; unsigned :1; unsigned storage_alt_space_ctl:1; unsigned :5; unsigned :16; __u32 starting_addr; __u32 ending_addr;} per_cr_bits __attribute__((packed));typedef struct{ __u16 perc_atmid; /* 0x096 */ __u32 address; /* 0x098 */ __u8 access_id; /* 0x0a1 */} per_lowcore_words __attribute__((packed));typedef struct{ unsigned perc_branching:1; /* 0x096 */ unsigned perc_instruction_fetch:1; unsigned perc_storage_alteration:1; unsigned perc_gpr_alt_unused:1; unsigned perc_store_real_address:1; unsigned :3; unsigned :1; unsigned atmid:5; unsigned si:2; __u32 address; /* 0x098 */ unsigned :4; /* 0x0a1 */ unsigned access_id:4; } per_lowcore_bits __attribute__((packed));typedef struct{ union { per_cr_words words; per_cr_bits bits; } control_regs __attribute__((packed)); /* Use these flags instead of setting em_instruction_fetch */ /* directly they are used so that single stepping can be */ /* switched on & off while not affecting other tracing */ unsigned single_step:1; unsigned instruction_fetch:1; unsigned :30; /* These addresses are copied into cr10 & cr11 if single stepping is switched off */ __u32 starting_addr; __u32 ending_addr; union { per_lowcore_words words; per_lowcore_bits bits; } lowcore; } per_struct __attribute__((packed));/* this struct defines the way the registers are stored on the stack during a system call. If you change the pt_regs structure, you'll need to change user.h too. N.B. if you modify the pt_regs struct the strace command also has to be modified & recompiled ( just wait till we have gdb going ).*/struct user_regs_struct{ S390_REGS s390_fp_regs fp_regs;/* These per registers are in here so that gdb can modify them itself * as there is no "official" ptrace interface for hardware watchpoints. * this is the way intel does it */ per_struct per_info;};typedef struct user_regs_struct user_regs_struct;typedef struct pt_regs pt_regs;#ifdef __KERNEL__#define user_mode(regs) (((regs)->psw.mask & PSW_PROBLEM_STATE) != 0)#define instruction_pointer(regs) ((regs)->psw.addr)struct thread_struct;extern int sprintf_regs(int line,char *buff,struct task_struct * task, struct thread_struct *tss,struct pt_regs * regs);extern void show_regs(struct task_struct * task,struct thread_struct *tss, struct pt_regs * regs);#endif#define FIX_PSW(addr) ((unsigned long)(addr)|0x80000000UL)#define MULT_PROCPTR_TYPES ((CONFIG_BINFMT_ELF)&&(CONFIG_BINFMT_TOC))typedef struct{ long addr; long toc;} routine_descriptor;extern void fix_routine_descriptor_regs(routine_descriptor *rdes,pt_regs *regs);extern __inline__ void fix_routine_descriptor_regs(routine_descriptor *rdes,pt_regs *regs){ regs->psw.addr=FIX_PSW(rdes->addr); regs->gprs[12]=rdes->toc;}/* * Compiler optimisation should save this stuff from being non optimal * & remove uneccessary code ( isnt gcc great DJB. ) *//*I'm just using this an indicator of what binformat we are using * (DJB) N.B. this needs to stay a macro unfortunately as I am otherwise * dereferencing incomplete pointer types in with load_toc_binary */#if MULT_PROCPTR_TYPES#define uses_routine_descriptors() \(current->binfmt->load_binary==load_toc_binary)#else#if CONFIG_BINFMT_TOC#define uses_routine_descriptors() 1#else#define uses_routine_descriptors() 0#endif#endif#define pt_off(ptreg) offsetof(user_regs_struct,ptreg)enum{ PT_PSWMASK=pt_off(psw.mask), PT_PSWADDR=pt_off(psw.addr), PT_GPR0=pt_off(gprs[0]), PT_GPR1=pt_off(gprs[1]), PT_GPR2=pt_off(gprs[2]), PT_GPR3=pt_off(gprs[3]), PT_GPR4=pt_off(gprs[4]), PT_GPR5=pt_off(gprs[5]), PT_GPR6=pt_off(gprs[6]), PT_GPR7=pt_off(gprs[7]), PT_GPR8=pt_off(gprs[8]), PT_GPR9=pt_off(gprs[9]), PT_GPR10=pt_off(gprs[10]), PT_GPR11=pt_off(gprs[11]), PT_GPR12=pt_off(gprs[12]), PT_GPR13=pt_off(gprs[13]), PT_GPR14=pt_off(gprs[14]), PT_GPR15=pt_off(gprs[15]), PT_ACR0=pt_off(acrs[0]), PT_ACR1=pt_off(acrs[1]), PT_ACR2=pt_off(acrs[2]), PT_ACR3=pt_off(acrs[3]), PT_ACR4=pt_off(acrs[4]), PT_ACR5=pt_off(acrs[5]), PT_ACR6=pt_off(acrs[6]), PT_ACR7=pt_off(acrs[7]), PT_ACR8=pt_off(acrs[8]), PT_ACR9=pt_off(acrs[9]), PT_ACR10=pt_off(acrs[10]), PT_ACR11=pt_off(acrs[11]), PT_ACR12=pt_off(acrs[12]), PT_ACR13=pt_off(acrs[13]), PT_ACR14=pt_off(acrs[14]), PT_ACR15=pt_off(acrs[15]), PT_ORIGGPR2=pt_off(orig_gpr2), PT_FPC=pt_off(fp_regs.fpc),/* * A nasty fact of life that the ptrace api * only supports passing of longs. */ PT_FPR0_HI=pt_off(fp_regs.fprs[0].fp.hi), PT_FPR0_LO=pt_off(fp_regs.fprs[0].fp.lo), PT_FPR1_HI=pt_off(fp_regs.fprs[1].fp.hi), PT_FPR1_LO=pt_off(fp_regs.fprs[1].fp.lo), PT_FPR2_HI=pt_off(fp_regs.fprs[2].fp.hi), PT_FPR2_LO=pt_off(fp_regs.fprs[2].fp.lo), PT_FPR3_HI=pt_off(fp_regs.fprs[3].fp.hi), PT_FPR3_LO=pt_off(fp_regs.fprs[3].fp.lo), PT_FPR4_HI=pt_off(fp_regs.fprs[4].fp.hi), PT_FPR4_LO=pt_off(fp_regs.fprs[4].fp.lo), PT_FPR5_HI=pt_off(fp_regs.fprs[5].fp.hi), PT_FPR5_LO=pt_off(fp_regs.fprs[5].fp.lo), PT_FPR6_HI=pt_off(fp_regs.fprs[6].fp.hi), PT_FPR6_LO=pt_off(fp_regs.fprs[6].fp.lo), PT_FPR7_HI=pt_off(fp_regs.fprs[7].fp.hi), PT_FPR7_LO=pt_off(fp_regs.fprs[7].fp.lo), PT_FPR8_HI=pt_off(fp_regs.fprs[8].fp.hi), PT_FPR8_LO=pt_off(fp_regs.fprs[8].fp.lo), PT_FPR9_HI=pt_off(fp_regs.fprs[9].fp.hi), PT_FPR9_LO=pt_off(fp_regs.fprs[9].fp.lo), PT_FPR10_HI=pt_off(fp_regs.fprs[10].fp.hi), PT_FPR10_LO=pt_off(fp_regs.fprs[10].fp.lo), PT_FPR11_HI=pt_off(fp_regs.fprs[11].fp.hi), PT_FPR11_LO=pt_off(fp_regs.fprs[11].fp.lo), PT_FPR12_HI=pt_off(fp_regs.fprs[12].fp.hi), PT_FPR12_LO=pt_off(fp_regs.fprs[12].fp.lo), PT_FPR13_HI=pt_off(fp_regs.fprs[13].fp.hi), PT_FPR13_LO=pt_off(fp_regs.fprs[13].fp.lo), PT_FPR14_HI=pt_off(fp_regs.fprs[14].fp.hi), PT_FPR14_LO=pt_off(fp_regs.fprs[14].fp.lo), PT_FPR15_HI=pt_off(fp_regs.fprs[15].fp.hi), PT_FPR15_LO=pt_off(fp_regs.fprs[15].fp.lo), PT_CR_9=pt_off(per_info.control_regs.words.cr[0]), PT_CR_10=pt_off(per_info.control_regs.words.cr[1]), PT_CR_11=pt_off(per_info.control_regs.words.cr[2]), PT_LASTOFF=PT_CR_11, PT_ENDREGS=offsetof(user_regs_struct,per_info.lowcore.words.perc_atmid)};#define PTRACE_AREA \__u32 len; \addr_t kernel_addr; \addr_t process_addr;typedef struct{ PTRACE_AREA} ptrace_area;/* 390 specific non posix ptrace requests I chose unusual values so they are unlikely to clash with future ptrace definitions. */#define PTRACE_PEEKUSR_AREA 0x5000#define PTRACE_POKEUSR_AREA 0x5001#define PTRACE_PEEKTEXT_AREA 0x5002#define PTRACE_PEEKDATA_AREA 0x5003#define PTRACE_POKETEXT_AREA 0x5004#define PTRACE_POKEDATA_AREA 0x5005/* PT_PROT definition is loosely based on hppa bsd definition in gdb/hppab-nat.c */#define PTRACE_PROT 21typedef enum{ ptprot_set_access_watchpoint, ptprot_set_write_watchpoint, ptprot_disable_watchpoint} ptprot_flags;typedef struct{ addr_t lowaddr; addr_t hiaddr; ptprot_flags prot;} ptprot_area; #endif
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -