pnic.c

来自「Linux内核源代码 为压缩文件 是<<Linux内核>&gt」· C语言 代码 · 共 144 行

/*
	drivers/net/tulip/pnic.c

	Maintained by Jeff Garzik <[e-mail]>
	Copyright 2000  The Linux Kernel Team
	Written/copyright 1994-1999 by Donald Becker.

	This software may be used and distributed according to the terms
	of the GNU Public License, incorporated herein by reference.

	Please refer to Documentation/networking/tulip.txt for more
	information on this driver.

*/

#include <linux/kernel.h>
#include "tulip.h"


void pnic_do_nway(struct net_device *dev)
{
	struct tulip_private *tp = (struct tulip_private *)dev->priv;
	long ioaddr = dev->base_addr;
	u32 phy_reg = inl(ioaddr + 0xB8);
	u32 new_csr6 = tp->csr6 & ~0x40C40200;

	if (phy_reg & 0x78000000) { /* Ignore baseT4 */
		if (phy_reg & 0x20000000)		dev->if_port = 5;
		else if (phy_reg & 0x40000000)	dev->if_port = 3;
		else if (phy_reg & 0x10000000)	dev->if_port = 4;
		else if (phy_reg & 0x08000000)	dev->if_port = 0;
		tp->nwayset = 1;
		new_csr6 = (dev->if_port & 1) ? 0x01860000 : 0x00420000;
		outl(0x32 | (dev->if_port & 1), ioaddr + CSR12);
		if (dev->if_port & 1)
			outl(0x1F868, ioaddr + 0xB8);
		if (phy_reg & 0x30000000) {
			tp->full_duplex = 1;
			new_csr6 |= 0x00000200;
		}
		if (tulip_debug > 1)
			printk(KERN_DEBUG "%s: PNIC autonegotiated status %8.8x, %s.\n",
				   dev->name, phy_reg, medianame[dev->if_port]);
		if (tp->csr6 != new_csr6) {
			tp->csr6 = new_csr6;
			/* Restart Tx */
			tulip_restart_rxtx(tp, tp->csr6);
			dev->trans_start = jiffies;
		}
	}
}


void pnic_lnk_change(struct net_device *dev, int csr5)
{
	struct tulip_private *tp = (struct tulip_private *)dev->priv;
	long ioaddr = dev->base_addr;
	int phy_reg = inl(ioaddr + 0xB8);

	if (tulip_debug > 1)
		printk(KERN_DEBUG "%s: PNIC link changed state %8.8x, CSR5 %8.8x.\n",
			   dev->name, phy_reg, csr5);
	if (inl(ioaddr + CSR5) & TPLnkFail) {
		outl((inl(ioaddr + CSR7) & ~TPLnkFail) | TPLnkPass, ioaddr + CSR7);
		if (! tp->nwayset  ||  jiffies - dev->trans_start > 1*HZ) {
			tp->csr6 = 0x00420000 | (tp->csr6 & 0x0000fdff);
			tulip_outl_csr(tp, tp->csr6, CSR6);
			outl(0x30, ioaddr + CSR12);
			outl(0x0201F078, ioaddr + 0xB8); /* Turn on autonegotiation. */
			dev->trans_start = jiffies;
		}
	} else if (inl(ioaddr + CSR5) & TPLnkPass) {
		pnic_do_nway(dev);
		outl((inl(ioaddr + CSR7) & ~TPLnkPass) | TPLnkFail, ioaddr + CSR7);
	}
}


void pnic_timer(unsigned long data)
{
	struct net_device *dev = (struct net_device *)data;
	struct tulip_private *tp = (struct tulip_private *)dev->priv;
	long ioaddr = dev->base_addr;
	int next_tick = 60*HZ;

	if (tulip_media_cap[dev->if_port] & MediaIsMII) {
		if (tulip_check_duplex(dev) > 0)
			next_tick = 3*HZ;
	} else {
		int csr12 = inl(ioaddr + CSR12);
		int new_csr6 = tp->csr6 & ~0x40C40200;
		int phy_reg = inl(ioaddr + 0xB8);
		int csr5 = inl(ioaddr + CSR5);

		if (tulip_debug > 1)
			printk(KERN_DEBUG "%s: PNIC timer PHY status %8.8x, %s "
				   "CSR5 %8.8x.\n",
				   dev->name, phy_reg, medianame[dev->if_port], csr5);
		if (phy_reg & 0x04000000) {	/* Remote link fault */
			outl(0x0201F078, ioaddr + 0xB8);
			next_tick = 1*HZ;
			tp->nwayset = 0;
		} else if (phy_reg & 0x78000000) { /* Ignore baseT4 */
			pnic_do_nway(dev);
			next_tick = 60*HZ;
		} else if (csr5 & TPLnkFail) { /* 100baseTx link beat */
			if (tulip_debug > 1)
				printk(KERN_DEBUG "%s: %s link beat failed, CSR12 %4.4x, "
					   "CSR5 %8.8x, PHY %3.3x.\n",
					   dev->name, medianame[dev->if_port], csr12,
					   inl(ioaddr + CSR5), inl(ioaddr + 0xB8));
			next_tick = 3*HZ;
			if (tp->medialock) {
			} else if (tp->nwayset  &&  (dev->if_port & 1)) {
				next_tick = 1*HZ;
			} else if (dev->if_port == 0) {
				dev->if_port = 3;
				outl(0x33, ioaddr + CSR12);
				new_csr6 = 0x01860000;
				outl(0x1F868, ioaddr + 0xB8);
			} else {
				dev->if_port = 0;
				outl(0x32, ioaddr + CSR12);
				new_csr6 = 0x00420000;
				outl(0x1F078, ioaddr + 0xB8);
			}
			if (tp->csr6 != new_csr6) {
				tp->csr6 = new_csr6;
				/* Restart Tx */
				tulip_restart_rxtx(tp, tp->csr6);
				dev->trans_start = jiffies;
				if (tulip_debug > 1)
					printk(KERN_INFO "%s: Changing PNIC configuration to %s "
						   "%s-duplex, CSR6 %8.8x.\n",
						   dev->name, medianame[dev->if_port],
						   tp->full_duplex ? "full" : "half", new_csr6);
			}
		}
	}
	tp->timer.expires = RUN_AT(next_tick);
	add_timer(&tp->timer);
}