aironet4500_rid.c

Linux内核源代码 为压缩文件 是<<Linux内核>>一书中的源代码

/*
 *	 Aironet 4500 Pcmcia driver
 *
 *		Elmer Joandi, Januar 1999
 *	Copyright Elmer Joandi, all rights restricted
 *	
 *
 *	Revision 0.1 ,started  30.12.1998
 *
 *
 */

#include <linux/module.h>
#include <linux/kernel.h>

#include "aironet4500.h"



#define awc_RID_gen_RidLen 				{(const struct aironet4500_rid_selector *)&aironet4500_RID_Select_General_Config,0x0000, 8,1,1,1,0, 0xffffffff,0x0000, "Length of RID" }
#define awc_RID_gen_OperatingMode_adhoc 		{&aironet4500_RID_Select_General_Config,0x0002,16,1,1,0,0, 0x00000003,0x0000,"Opmode IBSS Adhoc operation" } // Without AP
#define awc_RID_gen_OperatingMode_Infrastructure 	{&aironet4500_RID_Select_General_Config,0x0002,16,1,1,0,0, 0x00000003,0x0001,"Opmode Infrastructure Station operation" }// With AP
#define awc_RID_gen_OperatingMode_AP			{&aironet4500_RID_Select_General_Config,0x0002,16,1,1,0,0, 0x00000003,0x0002,"Opmode Access Point" } // Aironet doesnt release info on use 
#define awc_RID_gen_OperatingMode_AP_and_repeater 	{&aironet4500_RID_Select_General_Config,0x0002,16,1,1,0,0, 0x00000003,0x0003,"Opmode Access Point and Repeater" } // no info
#define awc_RID_gen_OperatingMode_No_payload_modify	{&aironet4500_RID_Select_General_Config,0x0002,16,1,1,0,0, 0x00000100,0x0100,"Opmode Payload without modify" } 
#define awc_RID_gen_OperatingMode_LLC_802_3_convert	{&aironet4500_RID_Select_General_Config,0x0002,16,1,1,0,0, 0x00000100,0x0000,"Opmode LLC -> 802.3 convert" }
#define awc_RID_gen_OperatingMode_proprietary_ext 	{&aironet4500_RID_Select_General_Config,0x0002,16,1,1,0,0, 0x00000200,0x0200,"Opmode Aironet Extentsions enabled" } // neened for 11Mbps
#define awc_RID_gen_OperatingMode_no_proprietary_ext 	{&aironet4500_RID_Select_General_Config,0x0002,16,1,1,0,0,0x00000200,0x0000,"Opmode Aironet Extentsions disabled" }
#define awc_RID_gen_OperatingMode_AP_ext 		{&aironet4500_RID_Select_General_Config,0x0002,16,1,1,0,0, 0x00000400,0x0400,"Opmode AP Extentsions enabled" }	// no info
#define awc_RID_gen_OperatingMode_no_AP_ext	 	{&aironet4500_RID_Select_General_Config,0x0002,16,1,1,0,0, 0x00000400,0x0000,"Opmode AP Extentsions disabled" }
#define awc_RID_gen_ReceiveMode 			{&aironet4500_RID_Select_General_Config,0x0004,16,1,1,0,0,0x0000ffff,0x0000,"RX Mode"}
#define awc_RID_gen_ReceiveMode_BMA 			{&aironet4500_RID_Select_General_Config,0x0004,16,1,1,0,0,0x0000000f,0x0000,"RX Mode BC MC ADDR"}
#define awc_RID_gen_ReceiveMode_BA 			{&aironet4500_RID_Select_General_Config,0x0004,16,1,1,0,0,0x0000000f,0x0001,"RX Mode BC ADDR"}
#define awc_RID_gen_ReceiveMode_A 			{&aironet4500_RID_Select_General_Config,0x0004,16,1,1,0,0,0x0000000f,0x0002,"RX Mode ADDR"}
#define awc_RID_gen_ReceiveMode_802_11_monitor		{&aironet4500_RID_Select_General_Config,0x0004,16,1,1,0,0,0x0000000f,0x0003,"RX Mode 802.11 Monitor current BSSID"}
#define awc_RID_gen_ReceiveMode_802_11_any_monitor 	{&aironet4500_RID_Select_General_Config,0x0004,16,1,1,0,0,0x0000000f,0x0004,"RX Mode 802.11 Monitor any BSSID"}
#define awc_RID_gen_ReceiveMode_LAN_monitor 		{&aironet4500_RID_Select_General_Config,0x0004,16,1,1,0,0,0x0000000f,0x0005,"RX Mode LAN Monitor current BSSID"}
#define awc_RID_gen_ReceiveMode_802_3_hdr_disable 	{&aironet4500_RID_Select_General_Config,0x0004,16,1,1,0,0,0x00000100,0x0100,"RX Mode Disable RX 802.3 Header"}
#define awc_RID_gen_ReceiveMode_802_3_hdr_enable 	{&aironet4500_RID_Select_General_Config,0x0004,16,1,1,0,0,0x00000100,0x0000,"RX Mode Enable RX 802.3 header"}
#define awc_RID_gen_Fragmentation_threshold		{&aironet4500_RID_Select_General_Config,0x0006,16,1,1,0,0,0x0000ffff,0x0000,"Fragmentation Threshold"}		// treshold of packet size starting to be fragmented
#define awc_RID_gen_RTS_threshold 			{&aironet4500_RID_Select_General_Config,0x0008,16,1,1,0,0,0xffff,0x0000,"RTS Threshold"}	// packet size, larger ones get sent with RTS/CTS
#define awc_RID_gen_Station_Mac_Id 			{&aironet4500_RID_Select_General_Config,0x000A, 8,6,1,0,0,0xff,0,"Station MAC Id"}
#define awc_RID_gen_Supported_rates 			{&aironet4500_RID_Select_General_Config,0x0010, 8,8,1,0,1,0xff,0x00,"Supported Rates"}	// Hex encoded 500kbps 
#define awc_RID_gen_Basic_Rate 				{&aironet4500_RID_Select_General_Config,0x0010, 8,1,1,0,1,0x80,0x80,"Basic Rate"}	// if 0x80 bit is set
#define awc_RID_gen_Rate_500kbps 			{&aironet4500_RID_Select_General_Config,0x0010, 8,1,1,0,1,0x7f,0x01,"Rate 500kbps"}
#define awc_RID_gen_Rate_1Mbps 				{&aironet4500_RID_Select_General_Config,0x0010, 8,1,1,0,1,0x7f,0x02,"Rate 1Mbps"}
#define awc_RID_gen_Rate_2Mbps 				{&aironet4500_RID_Select_General_Config,0x0010, 8,1,1,0,1,0x7f,0x04,"Rate 2Mbps"}
#define awc_RID_gen_Rate_4Mbps 				{&aironet4500_RID_Select_General_Config,0x0010, 8,1,1,0,1,0x7f,0x08,"Rate 4Mbps"}
#define awc_RID_gen_Rate_5Mbps 				{&aironet4500_RID_Select_General_Config,0x0010, 8,1,1,0,1,0x7f,0x0B,"Rate 5.5Mbps"}
#define awc_RID_gen_Rate_10Mbps 			{&aironet4500_RID_Select_General_Config,0x0010, 8,1,1,0,1,0x7f,0x14,"Rate 10Mbps"}
#define awc_RID_gen_Rate_11Mbps 			{&aironet4500_RID_Select_General_Config,0x0010, 8,1,1,0,1,0x7f,0x16,"Rate 11Mbps"}
#define awc_RID_gen_BasicRate_500kbps 			{&aironet4500_RID_Select_General_Config,0x0010, 8,1,1,0,1,0xff,0x81,"BasicRate 500kbps"}
#define awc_RID_gen_BasicRate_1Mbps 				{&aironet4500_RID_Select_General_Config,0x0010, 8,1,1,0,1,0xff,0x82,"BasicRate 1Mbps"}
#define awc_RID_gen_BasicRate_2Mbps 				{&aironet4500_RID_Select_General_Config,0x0010, 8,1,1,0,1,0xff,0x84,"BasicRate 2Mbps"}
#define awc_RID_gen_BasicRate_4Mbps 				{&aironet4500_RID_Select_General_Config,0x0010, 8,1,1,0,1,0xff,0x88,"BasicRate 4Mbps"}
#define awc_RID_gen_BasicRate_5Mbps 				{&aironet4500_RID_Select_General_Config,0x0010, 8,1,1,0,1,0xff,0x8B,"BasicRate 5.5Mbps"}
#define awc_RID_gen_BasicRate_10Mbps 			{&aironet4500_RID_Select_General_Config,0x0010, 8,1,1,0,1,0xff,0x94,"BasicRate 10Mbps"}
#define awc_RID_gen_BasicRate_11Mbps 			{&aironet4500_RID_Select_General_Config,0x0010, 8,1,1,0,1,0xff,0x96,"BasicRate 11Mbps"}


#define awc_RID_gen_Long_retry_limit 			{&aironet4500_RID_Select_General_Config,0x0018,16, 1,1,0,0,0xffff,0,"Short Retry Limit"}
#define awc_RID_gen_Short_retry_limit 			{&aironet4500_RID_Select_General_Config,0x001A,16, 1,1,0,0,0xffff,0,"Long Retry Limit"}
#define awc_RID_gen_Tx_MSDU_lifetime 			{&aironet4500_RID_Select_General_Config,0x001C,16, 1,1000,0,0,0xffff,0,"TX MSDU Lifetime"}
#define awc_RID_gen_Rx_MSDU_lifetime 			{&aironet4500_RID_Select_General_Config,0x001E,16, 1,1000,0,0,0xffff,0,"RX MSDU Lifetime"}
#define awc_RID_gen_Stationary 				{&aironet4500_RID_Select_General_Config,0x0020,16, 1,1,0,0,0xffff,0,"Stationary"}
#define awc_RID_gen_BC_MC_Ordering 			{&aironet4500_RID_Select_General_Config,0x0022,16, 1,1,0,0,0xffff,0,"Strictly order Bcast and Mcast"}
#define awc_RID_gen_Device_type 			{&aironet4500_RID_Select_General_Config,0x0024,16, 1,1,1,0,0xffff,0x00,"Radio Type"}
#define awc_RID_gen_Reserved_0x0026 			{&aironet4500_RID_Select_General_Config,0x0026, 8,10,1,0,0,0xff,0,"Reserved0x28"}


//SCANNING/ASSOCIATING
#define awc_RID_gen_ScanMode				awc_def_gen_RID(0x0030,"ScanMode",		16,0xf,0, NULL)
#define awc_RID_gen_ScanMode_Active 			awc_def_gen_RID(0x0030,"ScanMode Active",		16,0xf,0, "Active")
#define awc_RID_gen_ScanMode_Passive 			awc_def_gen_RID(0x0030,"ScanMode Passive",		16,0xf,1, "Passive")
#define awc_RID_gen_ScanMode_Aironet_ext		awc_def_gen_RID(0x0030,"ScanMode Aironet Ext",		16,0xf,2, "Aironet Ext")
#define awc_RID_gen_ProbeDelay 				awc_def_gen_RID(0x0032,"ProbeDelay",		16,0xffff,0," msek") 		//                 Time ms to wait after switching to a channel for clear channel assessment.
#define awc_RID_gen_ProbeEnergyTimeout 			awc_def_gen_RID(0x0034,"ProbeEnergyTimeout",	16,0xffff,0,"msek") 	//          Time to wait for energy after an active probe.
#define awc_RID_gen_ProbeResponseTimeout		awc_def_gen_RID(0x0036,"ProbeResponseTimeout",	16,0xffff,0,"msek") 	// Time to wait for a probe response after energy detected.
#define awc_RID_gen_BeaconListenTimeout 		awc_def_gen_RID(0x0038,"BeaconListenTimeout",	16,0xffff,0,"msek")	//    0 default    40          Time to listen for a beacon on each channel.
#define awc_RID_gen_IbssJoinNetTimeout 			awc_def_gen_RID(0x003A,"IbssJoinNetTimeout",	16,0xffff,0,"msek")	//       0 default    10000       IBSS: Time to scan for an IBSS before forming a
#define awc_RID_gen_AuthenticationTimeout 		awc_def_gen_RID(0x003C,"AuthenticationTimeout",16,0xffff,0,"msek")	//       0 default    2000        Time limit after which an authentication sequence will
#define awc_RID_gen_AuthenticationType 			awc_def_gen_RID(0x003E,"AuthenticationType",	16,0xffff,0,NULL)	//       0 default    1 (open) //    Selects the desired authentication and privacy methods.		 
#define awc_RID_gen_AuthenticationType_None 		awc_def_gen_RID(0x003E,"AuthenticationType None",	16,0xffff,0,"None") 	//   0x00 = None	
#define awc_RID_gen_AuthenticationType_Open		awc_def_gen_RID(0x003E,"AuthenticationType Open",	16,0xffff,1,"Open") 	//             0x01 = Open
#define awc_RID_gen_AuthenticationType_Shared		awc_def_gen_RID(0x003E,"AuthenticationType Shared-Key",	16,0xffff,2,"Shared-Key")  	//     0x02 = Shared-Key
#define awc_RID_gen_AuthenticationType_Exclude_Open 	awc_def_gen_RID(0x003E,"AuthenticationType Exclude Open",	16,0xffff,4,"Exclude Open")   	//              0x04 = Exclude Unencrypted
#define awc_RID_gen_AssociationTimeout 			awc_def_gen_RID(0x0040,"AssociationTimeout",	16,0xffff,0,"msek")	//       0 default    2000        ESS: Time limit after which an association sequence
#define awc_RID_gen_SpecifiedAPtimeout 			awc_def_gen_RID(0x0042,"SpecifiedAPtimeout",	16,0xffff,0,"msek")	//       0 default    10000       0 selects the factory default [~10 sec].
#define awc_RID_gen_OfflineScanInterval 		awc_def_gen_RID(0x0044,"OfflineScanInterval",	16,0xffff,0,"msek")	//       0            0           0 disables offline scanning.(kus)        The time period between offline scans.
#define awc_RID_gen_OfflineScanDuration 		awc_def_gen_RID(0x0046,"OfflineScanDuration",	16,0xffff,0,"msek")	//       0            0           0 disables offline scanning. //    (kus)        The duration of an offline scan.
#define awc_RID_gen_LinkLossDelay 			awc_def_gen_RID(0x0048,"LinkLossDelay",	16,0xffff,0,"msek")	//       0  0 Time to delay before reporting a loss of association
#define awc_RID_gen_MaxBeaconLostTime 			awc_def_gen_RID(0x004A,"MaxBeaconLostTime",	16,0xffff,0,"msek")	//      0 default    500        If no beacons are received for this time period, the unit
#define awc_RID_gen_RefreshInterval 			awc_def_gen_RID(0x004C,"RefreshInterval",	16,0xffff,0,"msek")		//      0 default    10000      At the specified interval, the station will send a refresh
//POWER SAVE OPERATION
#define awc_RID_gen_PowerSaveMode 			awc_def_gen_RID(0x0050,"PowerSaveMode",	16,0xffff,0,NULL) 		//      0  0Note, for IBSS there is only one PSP mode and it is only enabled if the ATIMwindow is non-zero.
#define awc_RID_gen_PowerSaveMode_CAM 		awc_def_gen_RID(0x0050,"PowerSaveMode CAM",	16,0x000f,0,"CAM") 	// 0 = CAM
#define awc_RID_gen_PowerSaveMode_PSP 		awc_def_gen_RID(0x0050,"PowerSaveMode PSP",	16,0x000f,1,"PSP") 	// 1 = PSP
#define awc_RID_gen_PowerSaveMode_Fast_PSP		awc_def_gen_RID(0x0050,"PowerSaveMode Fast PSP",	16,0x000f,2,"Fast PSP")	//2 = PSP-CAM [FASTPSP]
#define awc_RID_gen_SleepForDTIMs 			awc_def_gen_RID(0x0052,"SleepForDTIMs",	16,0xffff,0,"DTIMs")	//      0  0If non-zero, the station may sleep through DTIMs; this
#define awc_RID_gen_ListenInterval 			awc_def_gen_RID(0x0054,"ListenInterval",	16,0xffff,0,"msek")		//      0 default    200 kus    Maximum time to awaken for TIMs. 0 selects factory