⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 fastlane.c

📁 Linux内核源代码 为压缩文件 是<<Linux内核>>一书中的源代码
💻 C
字号:
/* fastlane.c: Driver for Phase5's Fastlane SCSI Controller. * * Copyright (C) 1996 Jesper Skov (jskov@cygnus.co.uk) * * This driver is based on the CyberStorm driver, hence the occasional * reference to CyberStorm. * * Betatesting & crucial adjustments by *        Patrik Rak (prak3264@ss1000.ms.mff.cuni.cz) * *//* TODO: * * o According to the doc from laire, it is required to reset the DMA when *   the transfer is done. ATM we reset DMA just before every new  *   dma_init_(read|write). * * 1) Figure out how to make a cleaner merge with the sparc driver with regard *    to the caches and the Sparc MMU mapping. * 2) Make as few routines required outside the generic driver. A lot of the *    routines in this file used to be inline! */#include <linux/module.h>#include <linux/init.h>#include <linux/kernel.h>#include <linux/delay.h>#include <linux/types.h>#include <linux/string.h>#include <linux/malloc.h>#include <linux/blk.h>#include <linux/proc_fs.h>#include <linux/stat.h>#include "scsi.h"#include "hosts.h"#include "NCR53C9x.h"#include "fastlane.h"#include <linux/zorro.h>#include <asm/irq.h>#include <asm/io.h>#include <asm/amigaints.h>#include <asm/amigahw.h>#include <asm/pgtable.h>/* Such day has just come... */#if 0/* Let this defined unless you really need to enable DMA IRQ one day */#define NODMAIRQ#endifstatic int  dma_bytes_sent(struct NCR_ESP *esp, int fifo_count);static int  dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp);static inline void dma_clear(struct NCR_ESP *esp);static void dma_dump_state(struct NCR_ESP *esp);static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length);static void dma_init_write(struct NCR_ESP *esp, __u32 vaddr, int length);static void dma_ints_off(struct NCR_ESP *esp);static void dma_ints_on(struct NCR_ESP *esp);static int  dma_irq_p(struct NCR_ESP *esp);static void dma_irq_exit(struct NCR_ESP *esp);static void dma_led_off(struct NCR_ESP *esp);static void dma_led_on(struct NCR_ESP *esp);static int  dma_ports_p(struct NCR_ESP *esp);static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write);static unsigned char ctrl_data = 0;	/* Keep backup of the stuff written				 * to ctrl_reg. Always write a copy				 * to this register when writing to				 * the hardware register!				 */volatile unsigned char cmd_buffer[16];				/* This is where all commands are put				 * before they are transfered to the ESP chip				 * via PIO.				 *//***************************************************************** Detection */int __init fastlane_esp_detect(Scsi_Host_Template *tpnt){	struct NCR_ESP *esp;	struct zorro_dev *z = NULL;	unsigned long address;	if ((z = zorro_find_device(ZORRO_PROD_PHASE5_BLIZZARD_1230_II_FASTLANE_Z3_CYBERSCSI_CYBERSTORM060, z))) {	    unsigned long board = z->resource.start;	    if (request_mem_region(board+FASTLANE_ESP_ADDR,				   sizeof(struct ESP_regs), "NCR53C9x")) {		/* Check if this is really a fastlane controller. The problem		 * is that also the cyberstorm and blizzard controllers use		 * this ID value. Fortunately only Fastlane maps in Z3 space		 */		if (board < 0x1000000) {			release_mem_region(board+FASTLANE_ESP_ADDR,					   sizeof(struct ESP_regs));			return 0;		}		esp = esp_allocate(tpnt, (void *)board+FASTLANE_ESP_ADDR);		/* Do command transfer with programmed I/O */		esp->do_pio_cmds = 1;		/* Required functions */		esp->dma_bytes_sent = &dma_bytes_sent;		esp->dma_can_transfer = &dma_can_transfer;		esp->dma_dump_state = &dma_dump_state;		esp->dma_init_read = &dma_init_read;		esp->dma_init_write = &dma_init_write;		esp->dma_ints_off = &dma_ints_off;		esp->dma_ints_on = &dma_ints_on;		esp->dma_irq_p = &dma_irq_p;		esp->dma_ports_p = &dma_ports_p;		esp->dma_setup = &dma_setup;		/* Optional functions */		esp->dma_barrier = 0;		esp->dma_drain = 0;		esp->dma_invalidate = 0;		esp->dma_irq_entry = 0;		esp->dma_irq_exit = &dma_irq_exit;		esp->dma_led_on = &dma_led_on;		esp->dma_led_off = &dma_led_off;		esp->dma_poll = 0;		esp->dma_reset = 0;		/* Initialize the portBits (enable IRQs) */		ctrl_data = (FASTLANE_DMA_FCODE |#ifndef NODMAIRQ			     FASTLANE_DMA_EDI |#endif			     FASTLANE_DMA_ESI);					/* SCSI chip clock */		esp->cfreq = 40000000;		/* Map the physical address space into virtual kernel space */		address = (unsigned long)			ioremap_nocache(board, z->resource.end-board+1);		if(!address){			printk("Could not remap Fastlane controller memory!");			scsi_unregister (esp->ehost);			release_mem_region(board+FASTLANE_ESP_ADDR,					   sizeof(struct ESP_regs));			return 0;		}		/* The DMA registers on the Fastlane are mapped		 * relative to the device (i.e. in the same Zorro		 * I/O block).		 */		esp->dregs = (void *)(address + FASTLANE_DMA_ADDR);		/* ESP register base */		esp->eregs = (struct ESP_regs *)(address + FASTLANE_ESP_ADDR);		/* Board base */		esp->edev = (void *) address;				/* Set the command buffer */		esp->esp_command = (volatile unsigned char*) cmd_buffer;		esp->esp_command_dvma = virt_to_bus(cmd_buffer);		esp->irq = IRQ_AMIGA_PORTS;		esp->slot = board+FASTLANE_ESP_ADDR;		request_irq(IRQ_AMIGA_PORTS, esp_intr, SA_SHIRQ,			    "Fastlane SCSI", esp_intr);		/* Controller ID */		esp->scsi_id = 7;				/* We don't have a differential SCSI-bus. */		esp->diff = 0;		dma_clear(esp);		esp_initialize(esp);		printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps, esps_in_use);		esps_running = esps_in_use;		return esps_in_use;	    }	}	return 0;}/************************************************************* DMA Functions */static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count){	/* Since the Fastlane DMA is fully dedicated to the ESP chip,	 * the number of bytes sent (to the ESP chip) equals the number	 * of bytes in the FIFO - there is no buffering in the DMA controller.	 * XXXX Do I read this right? It is from host to ESP, right?	 */	return fifo_count;}static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp){	unsigned long sz = sp->SCp.this_residual;	if(sz > 0xfffc)		sz = 0xfffc;	return sz;}static void dma_dump_state(struct NCR_ESP *esp){	ESPLOG(("esp%d: dma -- cond_reg<%02x>\n",		esp->esp_id, ((struct fastlane_dma_registers *)			      (esp->dregs))->cond_reg));	ESPLOG(("intreq:<%04x>, intena:<%04x>\n",		custom.intreqr, custom.intenar));}static void dma_init_read(struct NCR_ESP *esp, __u32 addr, int length){	struct fastlane_dma_registers *dregs = 		(struct fastlane_dma_registers *) (esp->dregs);	unsigned long *t;		cache_clear(addr, length);	dma_clear(esp);	t = (unsigned long *)((addr & 0x00ffffff) + esp->edev);	dregs->clear_strobe = 0;	*t = addr;	ctrl_data = (ctrl_data & FASTLANE_DMA_MASK) | FASTLANE_DMA_ENABLE;	dregs->ctrl_reg = ctrl_data;}static void dma_init_write(struct NCR_ESP *esp, __u32 addr, int length){	struct fastlane_dma_registers *dregs = 		(struct fastlane_dma_registers *) (esp->dregs);	unsigned long *t;	cache_push(addr, length);	dma_clear(esp);	t = (unsigned long *)((addr & 0x00ffffff) + (esp->edev));	dregs->clear_strobe = 0;	*t = addr;	ctrl_data = ((ctrl_data & FASTLANE_DMA_MASK) | 		     FASTLANE_DMA_ENABLE |		     FASTLANE_DMA_WRITE);	dregs->ctrl_reg = ctrl_data;}static inline void dma_clear(struct NCR_ESP *esp){	struct fastlane_dma_registers *dregs = 		(struct fastlane_dma_registers *) (esp->dregs);	unsigned long *t;	ctrl_data = (ctrl_data & FASTLANE_DMA_MASK);	dregs->ctrl_reg = ctrl_data;	t = (unsigned long *)(esp->edev);	dregs->clear_strobe = 0;	*t = 0 ;}static void dma_ints_off(struct NCR_ESP *esp){	disable_irq(esp->irq);}static void dma_ints_on(struct NCR_ESP *esp){	enable_irq(esp->irq);}static void dma_irq_exit(struct NCR_ESP *esp){	struct fastlane_dma_registers *dregs = 		(struct fastlane_dma_registers *) (esp->dregs);	dregs->ctrl_reg = ctrl_data & ~(FASTLANE_DMA_EDI|FASTLANE_DMA_ESI);#ifdef __mc68000__	nop();#endif	dregs->ctrl_reg = ctrl_data;}static int dma_irq_p(struct NCR_ESP *esp){	struct fastlane_dma_registers *dregs = 		(struct fastlane_dma_registers *) (esp->dregs);	unsigned char dma_status;	dma_status = dregs->cond_reg;	if(dma_status & FASTLANE_DMA_IACT)		return 0;	/* not our IRQ */	/* Return non-zero if ESP requested IRQ */	return (#ifndef NODMAIRQ	   (dma_status & FASTLANE_DMA_CREQ) &&#endif	   (!(dma_status & FASTLANE_DMA_MINT)) &&	   (esp_read(((struct ESP_regs *) (esp->eregs))->esp_status) & ESP_STAT_INTR));}static void dma_led_off(struct NCR_ESP *esp){	ctrl_data &= ~FASTLANE_DMA_LED;	((struct fastlane_dma_registers *)(esp->dregs))->ctrl_reg = ctrl_data;}static void dma_led_on(struct NCR_ESP *esp){	ctrl_data |= FASTLANE_DMA_LED;	((struct fastlane_dma_registers *)(esp->dregs))->ctrl_reg = ctrl_data;}static int dma_ports_p(struct NCR_ESP *esp){	return ((custom.intenar) & IF_PORTS);}static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write){	/* On the Sparc, DMA_ST_WRITE means "move data from device to memory"	 * so when (write) is true, it actually means READ!	 */	if(write){		dma_init_read(esp, addr, count);	} else {		dma_init_write(esp, addr, count);	}}#define HOSTS_C#include "fastlane.h"static Scsi_Host_Template driver_template = SCSI_FASTLANE;#include "scsi_module.c"int fastlane_esp_release(struct Scsi_Host *instance){#ifdef MODULE	unsigned long address = (unsigned long)((struct NCR_ESP *)instance->hostdata)->edev;	esp_deallocate((struct NCR_ESP *)instance->hostdata);	esp_release();	release_mem_region(address, sizeof(struct ESP_regs));	free_irq(IRQ_AMIGA_PORTS, esp_intr);#endif	return 1;}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -