ov511.h

Linux内核源代码 为压缩文件 是<<Linux内核>>一书中的源代码

#ifndef __LINUX_OV511_H
#define __LINUX_OV511_H

#include <asm/uaccess.h>
#include <linux/videodev.h>
#include <linux/smp_lock.h>

#define OV511_DEBUG	/* Turn on debug messages */

#ifdef OV511_DEBUG
#  define PDEBUG(level, fmt, args...) \
if (debug >= level) info("[" __PRETTY_FUNCTION__ ":%d] " fmt, __LINE__ , ## args)
#else
#  define PDEBUG(level, fmt, args...) do {} while(0)
#endif

/* Camera interface register numbers */
#define OV511_REG_CAMERA_DELAY_MODE		0x10
#define OV511_REG_CAMERA_EDGE_MODE		0x11
#define OV511_REG_CAMERA_CLAMPED_PIXEL_NUM	0x12
#define OV511_REG_CAMERA_CLAMPED_LINE_NUM	0x13
#define OV511_REG_CAMERA_PIXEL_DIVISOR		0x14
#define OV511_REG_CAMERA_LINE_DIVISOR		0x15
#define OV511_REG_CAMERA_DATA_INPUT_SELECT	0x16
#define OV511_REG_CAMERA_RESERVED_LINE_MODE	0x17
#define OV511_REG_CAMERA_BITMASK		0x18

/* Snapshot mode camera interface register numbers */
#define OV511_REG_SNAP_CAPTURED_FRAME		0x19
#define OV511_REG_SNAP_CLAMPED_PIXEL_NUM	0x1A
#define OV511_REG_SNAP_CLAMPED_LINE_NUM		0x1B
#define OV511_REG_SNAP_PIXEL_DIVISOR		0x1C
#define OV511_REG_SNAP_LINE_DIVISOR		0x1D
#define OV511_REG_SNAP_DATA_INPUT_SELECT	0x1E
#define OV511_REG_SNAP_BITMASK			0x1F

/* DRAM register numbers */
#define OV511_REG_DRAM_ENABLE_FLOW_CONTROL	0x20
#define OV511_REG_DRAM_READ_CYCLE_PREDICT	0x21
#define OV511_REG_DRAM_MANUAL_READ_CYCLE	0x22
#define OV511_REG_DRAM_REFRESH_COUNTER		0x23

/* ISO FIFO register numbers */
#define OV511_REG_FIFO_PACKET_SIZE		0x30
#define OV511_REG_FIFO_BITMASK			0x31

/* PIO register numbers */
#define OV511_REG_PIO_BITMASK			0x38
#define OV511_REG_PIO_DATA_PORT			0x39
#define OV511_REG_PIO_BIST			0x3E

/* I2C register numbers */
#define OV511_REG_I2C_CONTROL			0x40
#define OV511_REG_I2C_SLAVE_ID_WRITE		0x41
#define OV511_REG_I2C_SUB_ADDRESS_3_BYTE	0x42
#define OV511_REG_I2C_SUB_ADDRESS_2_BYTE	0x43
#define OV511_REG_I2C_SLAVE_ID_READ		0x44
#define OV511_REG_I2C_DATA_PORT			0x45
#define OV511_REG_I2C_CLOCK_PRESCALER		0x46
#define OV511_REG_I2C_TIME_OUT_COUNTER		0x47

/* I2C snapshot register numbers */
#define OV511_REG_I2C_SNAP_SUB_ADDRESS		0x48
#define OV511_REG_I2C_SNAP_DATA_PORT		0x49

/* System control register numbers */
#define OV511_REG_SYSTEM_RESET			0x50
#define 	OV511_RESET_UDC			0x01
#define 	OV511_RESET_I2C			0x02
#define 	OV511_RESET_FIFO		0x04
#define 	OV511_RESET_OMNICE		0x08
#define 	OV511_RESET_DRAM_INTF		0x10
#define 	OV511_RESET_CAMERA_INTF		0x20
#define 	OV511_RESET_OV511		0x40
#define 	OV511_RESET_NOREGS		0x3F /* All but OV511 & regs */
#define 	OV511_RESET_ALL			0x7F
#define OV511_REG_SYSTEM_CLOCK_DIVISOR		0x51
#define OV511_REG_SYSTEM_SNAPSHOT		0x52
#define OV511_REG_SYSTEM_INIT         		0x53
#define OV511_REG_SYSTEM_PWR_CLK		0x54	/* OV511+ only */
#define OV511_REG_SYSTEM_LED_CTL		0x55	/* OV511+ only */
#define OV511_REG_SYSTEM_USER_DEFINED		0x5E
#define OV511_REG_SYSTEM_CUSTOM_ID		0x5F

/* OmniCE register numbers */
#define OV511_OMNICE_PREDICTION_HORIZ_Y		0x70
#define OV511_OMNICE_PREDICTION_HORIZ_UV	0x71
#define OV511_OMNICE_PREDICTION_VERT_Y		0x72
#define OV511_OMNICE_PREDICTION_VERT_UV		0x73
#define OV511_OMNICE_QUANTIZATION_HORIZ_Y	0x74
#define OV511_OMNICE_QUANTIZATION_HORIZ_UV	0x75
#define OV511_OMNICE_QUANTIZATION_VERT_Y	0x76
#define OV511_OMNICE_QUANTIZATION_VERT_UV	0x77
#define OV511_OMNICE_ENABLE			0x78
#define OV511_OMNICE_LUT_ENABLE			0x79		
#define OV511_OMNICE_Y_LUT_BEGIN		0x80
#define OV511_OMNICE_Y_LUT_END			0x9F
#define OV511_OMNICE_UV_LUT_BEGIN		0xA0
#define OV511_OMNICE_UV_LUT_END			0xBF

/* Alternate numbers for various max packet sizes (OV511 only) */
#define OV511_ALT_SIZE_992	0
#define OV511_ALT_SIZE_993	1
#define OV511_ALT_SIZE_768	2
#define OV511_ALT_SIZE_769	3
#define OV511_ALT_SIZE_512	4
#define OV511_ALT_SIZE_513	5
#define OV511_ALT_SIZE_257	6
#define OV511_ALT_SIZE_0	7

/* Alternate numbers for various max packet sizes (OV511+ only) */
#define OV511PLUS_ALT_SIZE_0	0
#define OV511PLUS_ALT_SIZE_33	1
#define OV511PLUS_ALT_SIZE_129	2
#define OV511PLUS_ALT_SIZE_257	3
#define OV511PLUS_ALT_SIZE_385	4
#define OV511PLUS_ALT_SIZE_513	5
#define OV511PLUS_ALT_SIZE_769	6
#define OV511PLUS_ALT_SIZE_961	7

/* OV7610 registers */
#define OV7610_REG_GAIN          0x00	/* gain setting (5:0) */
#define OV7610_REG_BLUE          0x01	/* blue channel balance */
#define OV7610_REG_RED           0x02	/* red channel balance */
#define OV7610_REG_SAT           0x03	/* saturation */
					/* 04 reserved */
#define OV7610_REG_CNT           0x05	/* Y contrast */
#define OV7610_REG_BRT           0x06	/* Y brightness */
					/* 08-0b reserved */
#define OV7610_REG_BLUE_BIAS     0x0C	/* blue channel bias (5:0) */
#define OV7610_REG_RED_BIAS      0x0D	/* read channel bias (5:0) */
#define OV7610_REG_GAMMA_COEFF   0x0E	/* gamma settings */
#define OV7610_REG_WB_RANGE      0x0F	/* AEC/ALC/S-AWB settings */
#define OV7610_REG_EXP           0x10	/* manual exposure setting */
#define OV7610_REG_CLOCK         0x11	/* polarity/clock prescaler */
#define OV7610_REG_COM_A         0x12	/* misc common regs */
#define OV7610_REG_COM_B         0x13	/* misc common regs */
#define OV7610_REG_COM_C         0x14	/* misc common regs */
#define OV7610_REG_COM_D         0x15	/* misc common regs */
#define OV7610_REG_FIELD_DIVIDE  0x16	/* field interval/mode settings */
#define OV7610_REG_HWIN_START    0x17	/* horizontal window start */
#define OV7610_REG_HWIN_END      0x18	/* horizontal window end */
#define OV7610_REG_VWIN_START    0x19	/* vertical window start */
#define OV7610_REG_VWIN_END      0x1A	/* vertical window end */
#define OV7610_REG_PIXEL_SHIFT   0x1B	/* pixel shift */
#define OV7610_REG_ID_HIGH       0x1C	/* manufacturer ID MSB */
#define OV7610_REG_ID_LOW        0x1D	/* manufacturer ID LSB */
					/* 0e-0f reserved */
#define OV7610_REG_COM_E         0x20	/* misc common regs */
#define OV7610_REG_YOFFSET       0x21	/* Y channel offset */
#define OV7610_REG_UOFFSET       0x22	/* U channel offset */
					/* 23 reserved */
#define OV7610_REG_ECW           0x24	/* Exposure white level for AEC */
#define OV7610_REG_ECB           0x25	/* Exposure black level for AEC */
#define OV7610_REG_COM_F         0x26	/* misc settings */
#define OV7610_REG_COM_G         0x27	/* misc settings */
#define OV7610_REG_COM_H         0x28	/* misc settings */
#define OV7610_REG_COM_I         0x29	/* misc settings */
#define OV7610_REG_FRAMERATE_H   0x2A	/* frame rate MSB + misc */
#define OV7610_REG_FRAMERATE_L   0x2B	/* frame rate LSB */
#define OV7610_REG_ALC           0x2C	/* Auto Level Control settings */
#define OV7610_REG_COM_J         0x2D	/* misc settings */
#define OV7610_REG_VOFFSET       0x2E	/* V channel offset adjustment */
#define OV7610_REG_ARRAY_BIAS	 0x2F	/* Array bias -- don't change */
					/* 30-32 reserved */
#define OV7610_REG_YGAMMA        0x33	/* misc gamma settings (7:6) */
#define OV7610_REG_BIAS_ADJUST   0x34	/* misc bias settings */
#define OV7610_REG_COM_L         0x35	/* misc settings */
					/* 36-37 reserved */
#define OV7610_REG_COM_K         0x38	/* misc registers */


#define SCRATCH_BUF_SIZE 512

#define FRAMES_PER_DESC		10	/* FIXME - What should this be? */
#define FRAME_SIZE_PER_DESC	993	/* FIXME - Deprecated */
#define MAX_FRAME_SIZE_PER_DESC	993	/* For statically allocated stuff */

#define OV511_ENDPOINT_ADDRESS 1	/* Isoc endpoint number */

// CAMERA SPECIFIC
// FIXME - these can vary between specific models
#define OV7610_I2C_WRITE_ID 0x42
#define OV7610_I2C_READ_ID  0x43
#define OV6xx0_I2C_WRITE_ID 0xC0
#define OV6xx0_I2C_READ_ID  0xC1

#define OV511_I2C_CLOCK_PRESCALER 0x03

/* Prototypes */
int usb_ov511_reg_read(struct usb_device *dev, unsigned char reg);
int usb_ov511_reg_write(struct usb_device *dev,
                        unsigned char reg,
                        unsigned char value);

/* Bridge types */
enum {
	BRG_OV511,
	BRG_OV511PLUS,
};

/* Sensor types */
enum {
	SEN_UNKNOWN,
	SEN_OV7610,
	SEN_OV7620,
	SEN_OV7620AE,
	SEN_OV6620,
};

enum {
	STATE_SCANNING,		/* Scanning for start */
	STATE_HEADER,		/* Parsing header */
	STATE_LINES,		/* Parsing lines */
};

/* Buffer states */
enum {
	BUF_NOT_ALLOCATED,
	BUF_ALLOCATED,
	BUF_PEND_DEALLOC,	/* ov511->buf_timer is set */
};

struct usb_device;

struct ov511_sbuf {
	char *data;
	urb_t *urb;
};

enum {
	FRAME_UNUSED,		/* Unused (no MCAPTURE) */
	FRAME_READY,		/* Ready to start grabbing */
	FRAME_GRABBING,		/* In the process of being grabbed into */
	FRAME_DONE,		/* Finished grabbing, but not been synced yet */
	FRAME_ERROR,		/* Something bad happened while processing */
};

struct ov511_regvals {
	enum {
		OV511_DONE_BUS,
		OV511_REG_BUS,
		OV511_I2C_BUS,
	} bus;
	unsigned char reg;
	unsigned char val;
};

struct ov511_frame {
	char *data;		/* Frame buffer */

	int depth;		/* Bytes per pixel */
	int width;		/* Width application is expecting */
	int height;		/* Height */

	int hdrwidth;		/* Width the frame actually is */
	int hdrheight;		/* Height */

	int sub_flag;		/* Sub-capture mode for this frame? */
	unsigned int format;	/* Format for this frame */
	int segsize;		/* How big is each segment from the camera? */

	volatile int grabstate;	/* State of grabbing */
	int scanstate;		/* State of scanning */

	int curline;		/* Line of frame we're working on */
	int curpix;
	int segment;		/* Segment from the incoming data */

	long scanlength;	/* uncompressed, raw data length of frame */
	long bytes_read;	/* amount of scanlength that has been read from *data */

	wait_queue_head_t wq;	/* Processes waiting */

	int snapshot;		/* True if frame was a snapshot */
};

#define OV511_NUMFRAMES	2
#define OV511_NUMSBUF	2

struct usb_ov511 {
	struct video_device vdev;

	/* Device structure */
	struct usb_device *dev;

	int customid;
	int desc;
	unsigned char iface;

	/* Determined by sensor type */
	int maxwidth;
	int maxheight;

	int brightness;
	int colour;
	int contrast;
	int hue;
	int whiteness;

	struct semaphore lock;
	int user;		/* user count for exclusive use */

	int streaming;		/* Are we streaming Isochronous? */
	int grabbing;		/* Are we grabbing? */

	int compress;		/* Should the next frame be compressed? */

	char *fbuf;		/* Videodev buffer area */

	int sub_flag;		/* Pix Array subcapture on flag */
	int subx;		/* Pix Array subcapture x offset */
	int suby;		/* Pix Array subcapture y offset */
	int subw;		/* Pix Array subcapture width */
	int subh;		/* Pix Array subcapture height */

	int curframe;		/* Current receiving sbuf */
	struct ov511_frame frame[OV511_NUMFRAMES];	

	int cursbuf;		/* Current receiving sbuf */
	struct ov511_sbuf sbuf[OV511_NUMSBUF];

	/* Scratch space from the Isochronous pipe */
	unsigned char scratch[SCRATCH_BUF_SIZE];
	int scratchlen;

	wait_queue_head_t wq;	/* Processes waiting */

	int snap_enabled;	/* Snapshot mode enabled */
	
	int bridge;		/* Type of bridge (OV511 or OV511+) */
	int sensor;		/* Type of image sensor chip */

	int packet_size;	/* Frame size per isoc desc */

				/* proc interface */
	struct semaphore param_lock;	/* params lock for this camera */
	struct proc_dir_entry *proc_entry;	/* /proc/ov511/videoX */
	
	/* Framebuffer/sbuf management */
	int buf_state;
	struct semaphore buf_lock;
	struct timer_list buf_timer;
};

struct cam_list {
	int id;
	char *description;
};

struct palette_list {
	int num;
	char *name;
};

struct mode_list {
	int width;
	int height;
	int color;		/* 0=grayscale, 1=color */
	u8 pxcnt;		/* pixel counter */
	u8 lncnt;		/* line counter */
	u8 pxdv;		/* pixel divisor */
	u8 lndv;		/* line divisor */
	u8 m420;
	u8 common_A;
	u8 common_L;
};

#endif