📄 awe_hw.h
字号:
/* * sound/awe_hw.h * * Access routines and definitions for the low level driver for the * Creative AWE32/SB32/AWE64 wave table synth. * version 0.4.4; Jan. 4, 2000 * * Copyright (C) 1996-2000 Takashi Iwai * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */#ifndef AWE_HW_H_DEF#define AWE_HW_H_DEF/* * Emu-8000 control registers * name(channel) reg, port */#define awe_cmd_idx(reg,ch) (((reg)<< 5) | (ch))#define Data0 0 /* 0x620: doubleword r/w */#define Data1 1 /* 0xA20: doubleword r/w */#define Data2 2 /* 0xA22: word r/w */#define Data3 3 /* 0xE20: word r/w */#define Pointer 4 /* 0xE22 register pointer r/w */#define AWE_CPF(ch) awe_cmd_idx(0,ch), Data0 /* DW: current pitch and fractional address */#define AWE_PTRX(ch) awe_cmd_idx(1,ch), Data0 /* DW: pitch target and reverb send */#define AWE_CVCF(ch) awe_cmd_idx(2,ch), Data0 /* DW: current volume and filter cutoff */#define AWE_VTFT(ch) awe_cmd_idx(3,ch), Data0 /* DW: volume and filter cutoff targets */#define AWE_0080(ch) awe_cmd_idx(4,ch), Data0 /* DW: ?? */#define AWE_00A0(ch) awe_cmd_idx(5,ch), Data0 /* DW: ?? */#define AWE_PSST(ch) awe_cmd_idx(6,ch), Data0 /* DW: pan send and loop start address */#define AWE_CSL(ch) awe_cmd_idx(7,ch), Data0 /* DW: chorus send and loop end address */#define AWE_CCCA(ch) awe_cmd_idx(0,ch), Data1 /* DW: Q, control bits, and current address */#define AWE_HWCF4 awe_cmd_idx(1,9), Data1 /* DW: config dw 4 */#define AWE_HWCF5 awe_cmd_idx(1,10), Data1 /* DW: config dw 5 */#define AWE_HWCF6 awe_cmd_idx(1,13), Data1 /* DW: config dw 6 */#define AWE_HWCF7 awe_cmd_idx(1,14), Data1 /* DW: config dw 7? (not documented) */#define AWE_SMALR awe_cmd_idx(1,20), Data1 /* DW: sound memory address for left read */#define AWE_SMARR awe_cmd_idx(1,21), Data1 /* DW: for right read */#define AWE_SMALW awe_cmd_idx(1,22), Data1 /* DW: sound memory address for left write */#define AWE_SMARW awe_cmd_idx(1,23), Data1 /* DW: for right write */#define AWE_SMLD awe_cmd_idx(1,26), Data1 /* W: sound memory left data */#define AWE_SMRD awe_cmd_idx(1,26), Data2 /* W: right data */#define AWE_WC awe_cmd_idx(1,27), Data2 /* W: sample counter */#define AWE_WC_Cmd awe_cmd_idx(1,27)#define AWE_WC_Port Data2#define AWE_HWCF1 awe_cmd_idx(1,29), Data1 /* W: config w 1 */#define AWE_HWCF2 awe_cmd_idx(1,30), Data1 /* W: config w 2 */#define AWE_HWCF3 awe_cmd_idx(1,31), Data1 /* W: config w 3 */#define AWE_INIT1(ch) awe_cmd_idx(2,ch), Data1 /* W: init array 1 */#define AWE_INIT2(ch) awe_cmd_idx(2,ch), Data2 /* W: init array 2 */#define AWE_INIT3(ch) awe_cmd_idx(3,ch), Data1 /* W: init array 3 */#define AWE_INIT4(ch) awe_cmd_idx(3,ch), Data2 /* W: init array 4 */#define AWE_ENVVOL(ch) awe_cmd_idx(4,ch), Data1 /* W: volume envelope delay */#define AWE_DCYSUSV(ch) awe_cmd_idx(5,ch), Data1 /* W: volume envelope sustain and decay */#define AWE_ENVVAL(ch) awe_cmd_idx(6,ch), Data1 /* W: modulation envelope delay */#define AWE_DCYSUS(ch) awe_cmd_idx(7,ch), Data1 /* W: modulation envelope sustain and decay */#define AWE_ATKHLDV(ch) awe_cmd_idx(4,ch), Data2 /* W: volume envelope attack and hold */#define AWE_LFO1VAL(ch) awe_cmd_idx(5,ch), Data2 /* W: LFO#1 Delay */#define AWE_ATKHLD(ch) awe_cmd_idx(6,ch), Data2 /* W: modulation envelope attack and hold */#define AWE_LFO2VAL(ch) awe_cmd_idx(7,ch), Data2 /* W: LFO#2 Delay */#define AWE_IP(ch) awe_cmd_idx(0,ch), Data3 /* W: initial pitch */#define AWE_IFATN(ch) awe_cmd_idx(1,ch), Data3 /* W: initial filter cutoff and attenuation */#define AWE_PEFE(ch) awe_cmd_idx(2,ch), Data3 /* W: pitch and filter envelope heights */#define AWE_FMMOD(ch) awe_cmd_idx(3,ch), Data3 /* W: vibrato and filter modulation freq */#define AWE_TREMFRQ(ch) awe_cmd_idx(4,ch), Data3 /* W: LFO#1 tremolo amount and freq */#define AWE_FM2FRQ2(ch) awe_cmd_idx(5,ch), Data3 /* W: LFO#2 vibrato amount and freq *//* used during detection (returns ROM version?; not documented in ADIP) */#define AWE_U1 0xE0, Data3 /* (R)(W) used in initialization */#define AWE_U2(ch) 0xC0+(ch), Data3 /* (W)(W) used in init envelope */#define AWE_MAX_VOICES 32#define AWE_NORMAL_VOICES 30 /*30&31 are reserved for DRAM refresh*/#define AWE_MAX_CHANNELS 32 /* max midi channels (must >= voices) */#define AWE_MAX_LAYERS AWE_MAX_VOICES /* maximum number of multiple layers */#define AWE_DRAM_OFFSET 0x200000#define AWE_MAX_DRAM_SIZE (28 * 1024) /* 28 MB is max onboard memory */#endif
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -