b1pci.c

Linux内核源代码 为压缩文件 是<<Linux内核>>一书中的源代码

	MOD_DEC_USE_COUNT;
}

static char *b1pciv4_procinfo(struct capi_ctr *ctrl)
{
	avmctrl_info *cinfo = (avmctrl_info *)(ctrl->driverdata);

	if (!cinfo)
		return "";
	sprintf(cinfo->infobuf, "%s %s 0x%x %d 0x%lx r%d",
		cinfo->cardname[0] ? cinfo->cardname : "-",
		cinfo->version[VER_DRIVER] ? cinfo->version[VER_DRIVER] : "-",
		cinfo->card ? cinfo->card->port : 0x0,
		cinfo->card ? cinfo->card->irq : 0,
		cinfo->card ? cinfo->card->membase : 0,
		cinfo->card ? cinfo->card->revision : 0
		);
	return cinfo->infobuf;
}

/* ------------------------------------------------------------- */

static int b1pciv4_add_card(struct capi_driver *driver, struct capicardparams *p)
{
	unsigned long base, page_offset;
	avmcard *card;
	avmctrl_info *cinfo;
	int retval;

	MOD_INC_USE_COUNT;

	card = (avmcard *) kmalloc(sizeof(avmcard), GFP_ATOMIC);

	if (!card) {
		printk(KERN_WARNING "%s: no memory.\n", driver->name);
	        MOD_DEC_USE_COUNT;
		return -ENOMEM;
	}
	memset(card, 0, sizeof(avmcard));
	card->dma = (avmcard_dmainfo *) kmalloc(sizeof(avmcard_dmainfo), GFP_ATOMIC);
	if (!card->dma) {
		printk(KERN_WARNING "%s: no memory.\n", driver->name);
		kfree(card);
	        MOD_DEC_USE_COUNT;
		return -ENOMEM;
	}
	memset(card->dma, 0, sizeof(avmcard_dmainfo));
        cinfo = (avmctrl_info *) kmalloc(sizeof(avmctrl_info), GFP_ATOMIC);
	if (!cinfo) {
		printk(KERN_WARNING "%s: no memory.\n", driver->name);
		kfree(card->dma);
		kfree(card);
	        MOD_DEC_USE_COUNT;
		return -ENOMEM;
	}
	memset(cinfo, 0, sizeof(avmctrl_info));
	card->ctrlinfo = cinfo;
	cinfo->card = card;
	sprintf(card->name, "b1pciv4-%x", p->port);
	card->port = p->port;
	card->irq = p->irq;
	card->membase = p->membase;
	card->cardtype = avm_b1pci;

	if (check_region(card->port, AVMB1_PORTLEN)) {
		printk(KERN_WARNING
		       "%s: ports 0x%03x-0x%03x in use.\n",
		       driver->name, card->port, card->port + AVMB1_PORTLEN);
	        kfree(card->ctrlinfo);
		kfree(card->dma);
		kfree(card);
	        MOD_DEC_USE_COUNT;
		return -EBUSY;
	}

	base = card->membase & PAGE_MASK;
	page_offset = card->membase - base;
	card->mbase = ioremap_nocache(base, page_offset + 64);
	if (card->mbase) {
		card->mbase += page_offset;
	} else {
		printk(KERN_NOTICE "%s: can't remap memory at 0x%lx\n",
					driver->name, card->membase);
	        kfree(card->ctrlinfo);
		kfree(card->dma);
		kfree(card);
	        MOD_DEC_USE_COUNT;
		return -EIO;
	}

	b1dma_reset(card);

	if ((retval = b1pciv4_detect(card)) != 0) {
		printk(KERN_NOTICE "%s: NO card at 0x%x (%d)\n",
					driver->name, card->port, retval);
                iounmap((void *) (((unsigned long) card->mbase) & PAGE_MASK));
	        kfree(card->ctrlinfo);
		kfree(card->dma);
		kfree(card);
	        MOD_DEC_USE_COUNT;
		return -EIO;
	}
	b1dma_reset(card);
	b1_getrevision(card);

	request_region(p->port, AVMB1_PORTLEN, card->name);

	retval = request_irq(card->irq, b1dma_interrupt, SA_SHIRQ, card->name, card);
	if (retval) {
		printk(KERN_ERR "%s: unable to get IRQ %d.\n",
				driver->name, card->irq);
                iounmap((void *) (((unsigned long) card->mbase) & PAGE_MASK));
		release_region(card->port, AVMB1_PORTLEN);
	        kfree(card->ctrlinfo);
		kfree(card->dma);
		kfree(card);
	        MOD_DEC_USE_COUNT;
		return -EBUSY;
	}

	cinfo->capi_ctrl = div4->attach_ctr(driver, card->name, cinfo);
	if (!cinfo->capi_ctrl) {
		printk(KERN_ERR "%s: attach controller failed.\n", driver->name);
                iounmap((void *) (((unsigned long) card->mbase) & PAGE_MASK));
		free_irq(card->irq, card);
		release_region(card->port, AVMB1_PORTLEN);
	        kfree(card->ctrlinfo);
		kfree(card->dma);
		kfree(card);
	        MOD_DEC_USE_COUNT;
		return -EBUSY;
	}
	card->cardnr = cinfo->capi_ctrl->cnr;

	skb_queue_head_init(&card->dma->send_queue);

	printk(KERN_INFO
		"%s: AVM B1 PCI V4 at i/o %#x, irq %d, mem %#lx, revision %d (dma)\n",
		driver->name, card->port, card->irq,
		card->membase, card->revision);

	return 0;
}

/* ------------------------------------------------------------- */


static struct capi_driver b1pciv4_driver = {
    name: "b1pciv4",
    revision: "0.0",
    load_firmware: b1dma_load_firmware,
    reset_ctr: b1dma_reset_ctr,
    remove_ctr: b1pciv4_remove_ctr,
    register_appl: b1dma_register_appl,
    release_appl: b1dma_release_appl,
    send_message: b1dma_send_message,

    procinfo: b1pciv4_procinfo,
    ctr_read_proc: b1dmactl_read_proc,
    driver_read_proc: 0,	/* use standard driver_read_proc */

    add_card: 0, /* no add_card function */
};

#endif /* CONFIG_ISDN_DRV_AVMB1_B1PCIV4 */

static int ncards = 0;

static int add_card(struct pci_dev *dev)
{
	struct capi_driver *driver = &b1pci_driver;
	struct capicardparams param;
	int retval;

	if (pci_resource_start(dev, 2)) { /* B1 PCI V4 */
#ifdef CONFIG_ISDN_DRV_AVMB1_B1PCIV4
		driver = &b1pciv4_driver;
#endif
		param.membase = pci_resource_start(dev, 0);
		param.port = pci_resource_start(dev, 2);
		param.irq = dev->irq;

		retval = pci_enable_device (dev);
		if (retval != 0) {
		        printk(KERN_ERR
			"%s: failed to enable AVM-B1 V4 at i/o %#x, irq %d, mem %#x err=%d\n",
			driver->name, param.port, param.irq, param.membase, retval);
			return -EIO;
		}

		printk(KERN_INFO
		"%s: PCI BIOS reports AVM-B1 V4 at i/o %#x, irq %d, mem %#x\n",
		driver->name, param.port, param.irq, param.membase);
#ifdef CONFIG_ISDN_DRV_AVMB1_B1PCIV4
		retval = b1pciv4_add_card(driver, &param);
#else
		retval = b1pci_add_card(driver, &param);
#endif
		if (retval != 0) {
		        printk(KERN_ERR
			"%s: no AVM-B1 V4 at i/o %#x, irq %d, mem %#x detected\n",
			driver->name, param.port, param.irq, param.membase);
		}
	} else {
		param.membase = 0;
		param.port = pci_resource_start(dev, 1);
		param.irq = dev->irq;

		retval = pci_enable_device (dev);
		if (retval != 0) {
		        printk(KERN_ERR
			"%s: failed to enable AVM-B1 at i/o %#x, irq %d, err=%d\n",
			driver->name, param.port, param.irq, retval);
			return -EIO;
		}
		printk(KERN_INFO
		"%s: PCI BIOS reports AVM-B1 at i/o %#x, irq %d\n",
		driver->name, param.port, param.irq);
		retval = b1pci_add_card(driver, &param);
		if (retval != 0) {
		        printk(KERN_ERR
			"%s: no AVM-B1 at i/o %#x, irq %d detected\n",
			driver->name, param.port, param.irq);
		}
	}
	return retval;
}

static int __init b1pci_init(void)
{
	struct capi_driver *driver = &b1pci_driver;
#ifdef CONFIG_ISDN_DRV_AVMB1_B1PCIV4
	struct capi_driver *driverv4 = &b1pciv4_driver;
#endif
	struct pci_dev *dev = NULL;
	char *p;
	int retval;

	MOD_INC_USE_COUNT;

	if ((p = strchr(revision, ':'))) {
		strncpy(driver->revision, p + 1, sizeof(driver->revision));
		p = strchr(driver->revision, '$');
		*p = 0;
#ifdef CONFIG_ISDN_DRV_AVMB1_B1PCIV4
	        p = strchr(revision, ':');
		strncpy(driverv4->revision, p + 1, sizeof(driverv4->revision));
		p = strchr(driverv4->revision, '$');
		*p = 0;
#endif
	}

	printk(KERN_INFO "%s: revision %s\n", driver->name, driver->revision);

        di = attach_capi_driver(driver);

	if (!di) {
		printk(KERN_ERR "%s: failed to attach capi_driver\n",
				driver->name);
		MOD_DEC_USE_COUNT;
		return -EIO;
	}

#ifdef CONFIG_ISDN_DRV_AVMB1_B1PCIV4
	printk(KERN_INFO "%s: revision %s\n", driverv4->name, driverv4->revision);

        div4 = attach_capi_driver(driverv4);

	if (!div4) {
    		detach_capi_driver(driver);
		printk(KERN_ERR "%s: failed to attach capi_driver\n",
				driverv4->name);
		MOD_DEC_USE_COUNT;
		return -EIO;
	}
#endif

#ifdef CONFIG_PCI
	if (!pci_present()) {
		printk(KERN_ERR "%s: no PCI bus present\n", driver->name);
    		detach_capi_driver(driver);
#ifdef CONFIG_ISDN_DRV_AVMB1_B1PCIV4
    		detach_capi_driver(driverv4);
#endif
		MOD_DEC_USE_COUNT;
		return -EIO;
	}

	while ((dev = pci_find_device(PCI_VENDOR_ID_AVM, PCI_DEVICE_ID_AVM_B1, dev))) {
		retval = add_card(dev);
		if (retval != 0) {
    			detach_capi_driver(driver);
#ifdef CONFIG_ISDN_DRV_AVMB1_B1PCIV4
    			detach_capi_driver(driverv4);
#endif
			MOD_DEC_USE_COUNT;
			return retval;
		}
		ncards++;
	}
	if (ncards) {
		printk(KERN_INFO "%s: %d B1-PCI card(s) detected\n",
				driver->name, ncards);
		MOD_DEC_USE_COUNT;
		return 0;
	}
	printk(KERN_ERR "%s: NO B1-PCI card detected\n", driver->name);
	detach_capi_driver(driver);
#ifdef CONFIG_ISDN_DRV_AVMB1_B1PCIV4
	detach_capi_driver(driverv4);
#endif
	MOD_DEC_USE_COUNT;
	return -ESRCH;
#else
	printk(KERN_ERR "%s: kernel not compiled with PCI.\n", driver->name);
	MOD_DEC_USE_COUNT;
	return -EIO;
#endif
}

static void __exit b1pci_exit(void)
{
    detach_capi_driver(&b1pci_driver);
#ifdef CONFIG_ISDN_DRV_AVMB1_B1PCIV4
    detach_capi_driver(&b1pciv4_driver);
#endif
}

module_init(b1pci_init);
module_exit(b1pci_exit);