⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 irq.c

📁 Linux内核源代码 为压缩文件 是<<Linux内核>>一书中的源代码
💻 C
字号:
/* $Id: irq.c,v 1.8 2000/02/08 02:01:17 grundler Exp $ * * Code to handle x86 style IRQs plus some generic interrupt stuff. * * This is not in any way SMP-clean. * * Copyright (C) 1992 Linus Torvalds * Copyright (C) 1994, 1995, 1996, 1997, 1998 Ralf Baechle * Copyright (C) 1999 SuSE GmbH (Author: Philipp Rumpf, prumpf@tux.org) * Copyright (C) 2000 Hewlett Packard Corp (Co-Author: Grant Grundler, grundler@cup.hp.com) * *    This program is free software; you can redistribute it and/or modify *    it under the terms of the GNU General Public License as published by *    the Free Software Foundation; either version 2, or (at your option) *    any later version. * *    This program is distributed in the hope that it will be useful, *    but WITHOUT ANY WARRANTY; without even the implied warranty of *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the *    GNU General Public License for more details. * *    You should have received a copy of the GNU General Public License *    along with this program; if not, write to the Free Software *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */#include <linux/config.h>#include <linux/bitops.h>#include <asm/bitops.h>#include <asm/pdc.h>#include <linux/errno.h>#include <linux/init.h>#include <linux/kernel_stat.h>#include <linux/signal.h>#include <linux/sched.h>#include <linux/types.h>#include <linux/ioport.h>#include <linux/timex.h>#include <linux/malloc.h>#include <linux/random.h>#include <linux/interrupt.h>#include <linux/irq.h>#include <asm/cache.h>#undef DEBUG_IRQextern void timer_interrupt(int, void *, struct pt_regs *);extern void ipi_interrupt(int, void *, struct pt_regs *);#ifdef DEBUG_IRQ#define DBG_IRQ(x...)   printk(x)#else /* DEBUG_IRQ */#define DBG_IRQ(x...)#endif /* DEBUG_IRQ */#define EIEM_MASK(irq) (1L<<(MAX_CPU_IRQ-IRQ_OFFSET(irq)))#define CLEAR_EIEM_BIT(irq) set_eiem(get_eiem() & ~EIEM_MASK(irq))#define SET_EIEM_BIT(irq) set_eiem(get_eiem() | EIEM_MASK(irq))static void disable_cpu_irq(void *unused, int irq){	CLEAR_EIEM_BIT(irq);}static void enable_cpu_irq(void *unused, int irq){	unsigned long mask = EIEM_MASK(irq);	mtctl(mask, 23);	SET_EIEM_BIT(irq);}static struct irqaction cpu_irq_actions[IRQ_PER_REGION] = {	[IRQ_OFFSET(TIMER_IRQ)] { timer_interrupt, 0, 0, "timer", NULL, NULL },	[IRQ_OFFSET(IPI_IRQ)]	{ ipi_interrupt, 0, 0, "IPI", NULL, NULL },};struct irq_region cpu_irq_region = {	{ disable_cpu_irq, enable_cpu_irq, NULL, NULL },	{ &cpu_data[0], "PA-PIC", IRQ_REG_MASK|IRQ_REG_DIS, IRQ_FROM_REGION(CPU_IRQ_REGION)},	cpu_irq_actions};struct irq_region *irq_region[NR_IRQ_REGS] = {	[ 0 ] NULL,		/* abuse will data page fault (aka code 15) */	[ CPU_IRQ_REGION ] &cpu_irq_region,};/* we special-case the real IRQs here, which feels right given the relatively * high cost of indirect calls.  If anyone is bored enough to benchmark this * and find out whether I am right, feel free to.   prumpf */static inline void mask_irq(int irq){	struct irq_region *region;	#ifdef DEBUG_IRQ	if (irq != TIMER_IRQ)#endif	DBG_IRQ("mask_irq(%d) %d+%d\n", irq, IRQ_REGION(irq), IRQ_OFFSET(irq));	if(IRQ_REGION(irq) != CPU_IRQ_REGION) {		region = irq_region[IRQ_REGION(irq)];		if(region->data.flags & IRQ_REG_MASK)			region->ops.mask_irq(region->data.dev, IRQ_OFFSET(irq));	} else {		CLEAR_EIEM_BIT(irq);	}}static inline void unmask_irq(int irq){	struct irq_region *region;#ifdef DEBUG_IRQ	if (irq != TIMER_IRQ)#endif	DBG_IRQ("unmask_irq(%d) %d+%d\n", irq, IRQ_REGION(irq), IRQ_OFFSET(irq));	if(IRQ_REGION(irq) != CPU_IRQ_REGION) {		region = irq_region[IRQ_REGION(irq)];		if(region->data.flags & IRQ_REG_MASK)			region->ops.unmask_irq(region->data.dev, IRQ_OFFSET(irq));	} else {		SET_EIEM_BIT(irq);	}}void disable_irq(int irq){	struct irq_region *region;#ifdef DEBUG_IRQ	if (irq != TIMER_IRQ)#endif	DBG_IRQ("disable_irq(%d) %d+%d\n", irq, IRQ_REGION(irq), IRQ_OFFSET(irq));	region = irq_region[IRQ_REGION(irq)];	if(region->data.flags & IRQ_REG_DIS)		region->ops.disable_irq(region->data.dev, IRQ_OFFSET(irq));	else		BUG();}void enable_irq(int irq) {	struct irq_region *region;#ifdef DEBUG_IRQ	if (irq != TIMER_IRQ)#endif	DBG_IRQ("enable_irq(%d) %d+%d\n", irq, IRQ_REGION(irq), IRQ_OFFSET(irq));	region = irq_region[IRQ_REGION(irq)];	if(region->data.flags & IRQ_REG_DIS)		region->ops.enable_irq(region->data.dev, IRQ_OFFSET(irq));	else		BUG();}int get_irq_list(char *buf){#ifdef CONFIG_PROC_FS	char *p = buf;	int i, j;	int regnr, irq_no;	struct irq_region *region;	struct irqaction *action, *mainaction;	p += sprintf(p, "           ");	for (j=0; j<smp_num_cpus; j++)		p += sprintf(p, "CPU%d       ",j);	*p++ = '\n';	for (regnr = 0; regnr < NR_IRQ_REGS; regnr++) {	    region = irq_region[regnr];	    if (!region || !region->action)		continue;	    	    mainaction = region->action;	    for (i = 0; i <= MAX_CPU_IRQ; i++) {		action = mainaction++;		if (!action || !action->name)		    continue;				irq_no = IRQ_FROM_REGION(regnr) + i;				p += sprintf(p, "%3d: ", irq_no);#ifndef CONFIG_SMP		p += sprintf(p, "%10u ", kstat_irqs(irq_no));#else		for (j = 0; j < smp_num_cpus; j++)		    p += sprintf(p, "%10u ",			    kstat.irqs[cpu_logical_map(j)][irq_no]);#endif		p += sprintf(p, " %14s", 			    region->data.name ? region->data.name : "N/A");		p += sprintf(p, "  %s", action->name);		for (action=action->next; action; action = action->next)		    p += sprintf(p, ", %s", action->name);		*p++ = '\n';	    }	    	     	}  	p += sprintf(p, "\n");#if CONFIG_SMP	p += sprintf(p, "LOC: ");	for (j = 0; j < smp_num_cpus; j++)		p += sprintf(p, "%10u ",			apic_timer_irqs[cpu_logical_map(j)]);	p += sprintf(p, "\n");#endif	return p - buf;#else	/* CONFIG_PROC_FS */	return 0;	#endif	/* CONFIG_PROC_FS */}/*** The following form a "set": Virtual IRQ, Transaction Address, Trans Data.** Respectively, these map to IRQ region+EIRR, Processor HPA, EIRR bit.**** To use txn_XXX() interfaces, get a Virtual IRQ first.** Then use that to get the Transaction address and data.*/inttxn_alloc_irq(void){	int irq;	/* never return irq 0 cause that's the interval timer */	for(irq=1; irq<=MAX_CPU_IRQ; irq++) {		if(cpu_irq_region.action[irq].handler == NULL) {			return (IRQ_FROM_REGION(CPU_IRQ_REGION) + irq);		}	}	/* unlikely, but be prepared */	return -1;}inttxn_claim_irq(int irq){	if (irq_region[IRQ_REGION(irq)]->action[IRQ_OFFSET(irq)].handler ==NULL)	{		return irq;	}	/* unlikely, but be prepared */	return -1;}unsigned longtxn_alloc_addr(int virt_irq){	struct cpuinfo_parisc *dev = (struct cpuinfo_parisc *) (irq_region[IRQ_REGION(virt_irq)]->data.dev);	if (0==dev) {		printk(KERN_ERR "txn_alloc_addr(0x%x): CPU IRQ region? dev %p\n",			virt_irq,dev);		return(0UL);	}	return (dev->txn_addr);}/*** The alloc process needs to accept a parameter to accomodate limitations** of the HW/SW which use these bits:** Legacy PA I/O (GSC/NIO): 5 bits (architected EIM register)** V-class (EPIC):          6 bits** N/L-class/A500:          8 bits (iosapic)** PCI 2.2 MSI:             16 bits (I think)** Existing PCI devices:    32-bits (NCR c720/ATM/GigE/HyperFabric)**** On the service provider side:** o PA 1.1 (and PA2.0 narrow mode)     5-bits (width of EIR register)** o PA 2.0 wide mode                   6-bits (per processor)** o IA64                               8-bits (0-256 total)**** So a Legacy PA I/O device on a PA 2.0 box can't use all** the bits supported by the processor...and the N/L-class** I/O subsystem supports more bits than PA2.0 has. The first** case is the problem.*/unsigned inttxn_alloc_data(int virt_irq, unsigned int bits_wide){	/* XXX FIXME : bits_wide indicates how wide the transaction	** data is allowed to be...we may need a different virt_irq	** if this one won't work. Another reason to index virtual	** irq's into a table which can manage CPU/IRQ bit seperately.	*/	if (IRQ_OFFSET(virt_irq) > (1 << (bits_wide -1)))	{		panic("Sorry -- didn't allocate valid IRQ for this device\n");	}	return(IRQ_OFFSET(virt_irq));}/* FIXME: SMP, flags, bottom halves, rest */void do_irq(struct irqaction *action, int irq, struct pt_regs * regs){	int cpu = smp_processor_id();	irq_enter(cpu, irq);#ifdef DEBUG_IRQ	if (irq != TIMER_IRQ)#endif	DBG_IRQ("do_irq(%d) %d+%d\n", irq, IRQ_REGION(irq), IRQ_OFFSET(irq));	if (action->handler == NULL)		printk(KERN_ERR "No handler for interrupt %d !\n", irq);	for(; action && action->handler; action = action->next) {		action->handler(irq, action->dev_id, regs);	}		irq_exit(cpu, irq);	/* don't need to care about unmasking and stuff */	do_softirq();}void do_irq_mask(unsigned long mask, struct irq_region *region, struct pt_regs *regs){	unsigned long bit;	int irq;	int cpu = smp_processor_id();#ifdef DEBUG_IRQ	if (mask != (1L << MAX_CPU_IRQ))	    printk("do_irq_mask %08lx %p %p\n", mask, region, regs);#endif	for(bit=(1L<<MAX_CPU_IRQ), irq = 0; mask && bit; bit>>=1, irq++) {		int irq_num;		if(!(bit&mask))			continue;		irq_num = region->data.irqbase + irq;		++kstat.irqs[cpu][IRQ_FROM_REGION(CPU_IRQ_REGION) | irq];		if (IRQ_REGION(irq_num) != CPU_IRQ_REGION)		    ++kstat.irqs[cpu][irq_num];		mask_irq(irq_num);		do_irq(&region->action[irq], irq_num, regs);		unmask_irq(irq_num);	}}static inline int alloc_irqregion(void){	int irqreg;	for(irqreg=1; irqreg<=(NR_IRQ_REGS); irqreg++) {		if(irq_region[irqreg] == NULL)			return irqreg;	}	return 0;}struct irq_region *alloc_irq_region(	int count, struct irq_region_ops *ops, unsigned long flags,	const char *name, void *dev){	struct irq_region *region;	int index;	index = alloc_irqregion();	if((IRQ_REGION(count-1)))		return NULL;		if (count < IRQ_PER_REGION) {	    DBG_IRQ("alloc_irq_region() using minimum of %d irq lines for %s (%d)\n", 			IRQ_PER_REGION, name, count);	    count = IRQ_PER_REGION;	}	if(flags & IRQ_REG_MASK)		if(!(ops->mask_irq && ops->unmask_irq))			return NULL;				if(flags & IRQ_REG_DIS)		if(!(ops->disable_irq && ops->enable_irq))			return NULL;	if((irq_region[index]))		return NULL;	region = kmalloc(sizeof *region, GFP_ATOMIC);	if(!region)		return NULL;	region->action = kmalloc(sizeof *region->action * count, GFP_ATOMIC);	if(!region->action) {		kfree(region);		return NULL;	}	memset(region->action, 0, sizeof *region->action * count);	region->ops = *ops;	region->data.irqbase = IRQ_FROM_REGION(index);	region->data.flags = flags;	region->data.name = name;	region->data.dev = dev;	irq_region[index] = region;	return irq_region[index];}		/* FIXME: SMP, flags, bottom halves, rest */int request_irq(unsigned int irq, 		void (*handler)(int, void *, struct pt_regs *),		unsigned long irqflags, 		const char * devname,		void *dev_id){	struct irqaction * action;#if 0	printk(KERN_INFO "request_irq(%d, %p, 0x%lx, %s, %p)\n",irq, handler, irqflags, devname, dev_id);#endif	if(!handler) {		printk(KERN_ERR "request_irq(%d,...): Augh! No handler for irq!\n",			irq);		return -EINVAL;	}	if ((IRQ_REGION(irq) == 0) || irq_region[IRQ_REGION(irq)] == NULL) {		/*		** Bug catcher for drivers which use "char" or u8 for		** the IRQ number. They lose the region number which		** is in pcidev->irq (an int).		*/		printk(KERN_ERR "%p (%s?) called request_irq with an invalid irq %d\n",			__builtin_return_address(0), devname, irq);		return -EINVAL;	}	action = &irq_region[IRQ_REGION(irq)]->action[IRQ_OFFSET(irq)];	if(action->handler) {		while(action->next)			action = action->next;		action->next = kmalloc(sizeof *action, GFP_ATOMIC);		action = action->next;	}				if(!action) {		printk(KERN_ERR "request_irq():Augh! No action!\n") ;		return -ENOMEM;	}	action->handler = handler;	action->flags = irqflags;	action->mask = 0;	action->name = devname;	action->next = NULL;	action->dev_id = dev_id;	enable_irq(irq);	return 0;}void free_irq(unsigned int irq, void *dev_id){	struct irqaction *action, **p;	action = &irq_region[IRQ_REGION(irq)]->action[IRQ_OFFSET(irq)];	if(action->dev_id == dev_id) {		if(action->next == NULL)			action->handler = NULL;		else			memcpy(action, action->next, sizeof *action);		return;	}	p = &action->next;	action = action->next;	for (; (action = *p) != NULL; p = &action->next) {		if (action->dev_id != dev_id)			continue;		/* Found it - now free it */		*p = action->next;		kfree(action);		return;	}	printk(KERN_ERR "Trying to free free IRQ%d\n",irq);}unsigned long probe_irq_on (void){	return 0;}int probe_irq_off (unsigned long irqs){	return 0;}void __init init_IRQ(void){}void init_irq_proc(void){}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -