📄 irq_alpha.c
字号:
/* * Alpha specific irq code. */#include <linux/config.h>#include <linux/init.h>#include <linux/sched.h>#include <linux/irq.h>#include <linux/kernel_stat.h>#include <asm/machvec.h>#include <asm/dma.h>#include "proto.h"#include "irq_impl.h"#ifndef CONFIG_SMPunsigned long __irq_attempt[NR_IRQS];#endif/* Hack minimum IPL during interupt processing for broken hardware. */#ifdef CONFIG_ALPHA_BROKEN_IRQ_MASKint __min_ipl;#endif/* * Performance counter hook. A module can override this to * do something useful. */static voiddummy_perf(unsigned long vector, struct pt_regs *regs){ irq_err_count++; printk(KERN_CRIT "Performance counter interrupt!\n");}void (*perf_irq)(unsigned long, struct pt_regs *) = dummy_perf;/* * The main interrupt entry point. */asmlinkage void do_entInt(unsigned long type, unsigned long vector, unsigned long la_ptr, unsigned long a3, unsigned long a4, unsigned long a5, struct pt_regs regs){ switch (type) { case 0:#ifdef CONFIG_SMP handle_ipi(®s); return;#else irq_err_count++; printk(KERN_CRIT "Interprocessor interrupt? " "You must be kidding!\n");#endif break; case 1:#ifdef CONFIG_SMP { long cpu; smp_percpu_timer_interrupt(®s); cpu = smp_processor_id(); if (cpu != boot_cpuid) { irq_attempt(cpu, RTC_IRQ)++; kstat.irqs[cpu][RTC_IRQ]++; } else { handle_irq(RTC_IRQ, ®s); } }#else handle_irq(RTC_IRQ, ®s);#endif return; case 2: alpha_mv.machine_check(vector, la_ptr, ®s); return; case 3: alpha_mv.device_interrupt(vector, ®s); return; case 4: perf_irq(vector, ®s); return; default: printk(KERN_CRIT "Hardware intr %ld %lx? Huh?\n", type, vector); } printk("PC = %016lx PS=%04lx\n", regs.pc, regs.ps);}void __initcommon_init_isa_dma(void){ outb(0, DMA1_RESET_REG); outb(0, DMA2_RESET_REG); outb(0, DMA1_CLR_MASK_REG); outb(0, DMA2_CLR_MASK_REG);}void __initinit_IRQ(void){ /* Uh, this really MUST come first, just in case * the platform init_irq() causes interrupts/mchecks * (as is the case with RAWHIDE, at least). */ wrent(entInt, 0); alpha_mv.init_irq(); /* If we had wanted SRM console printk echoing early, undo it now. */ if (alpha_using_srm && srmcons_output) { unregister_srm_console(); }}/* * machine error checks */#define MCHK_K_TPERR 0x0080#define MCHK_K_TCPERR 0x0082#define MCHK_K_HERR 0x0084#define MCHK_K_ECC_C 0x0086#define MCHK_K_ECC_NC 0x0088#define MCHK_K_OS_BUGCHECK 0x008A#define MCHK_K_PAL_BUGCHECK 0x0090#ifndef CONFIG_SMPstruct mcheck_info __mcheck_info;#endifvoidprocess_mcheck_info(unsigned long vector, unsigned long la_ptr, struct pt_regs *regs, const char *machine, int expected){ struct el_common *mchk_header; const char *reason; /* * See if the machine check is due to a badaddr() and if so, * ignore it. */#if DEBUG_MCHECK > 0 printk(KERN_CRIT "%s machine check %s\n", machine, expected ? "expected." : "NOT expected!!!");#endif if (expected) { int cpu = smp_processor_id(); mcheck_expected(cpu) = 0; mcheck_taken(cpu) = 1; return; } mchk_header = (struct el_common *)la_ptr; printk(KERN_CRIT "%s machine check: vector=0x%lx pc=0x%lx code=0x%lx\n", machine, vector, regs->pc, mchk_header->code); switch ((unsigned int) mchk_header->code) { /* Machine check reasons. Defined according to PALcode sources. */ case 0x80: reason = "tag parity error"; break; case 0x82: reason = "tag control parity error"; break; case 0x84: reason = "generic hard error"; break; case 0x86: reason = "correctable ECC error"; break; case 0x88: reason = "uncorrectable ECC error"; break; case 0x8A: reason = "OS-specific PAL bugcheck"; break; case 0x90: reason = "callsys in kernel mode"; break; case 0x96: reason = "i-cache read retryable error"; break; case 0x98: reason = "processor detected hard error"; break; /* System specific (these are for Alcor, at least): */ case 0x202: reason = "system detected hard error"; break; case 0x203: reason = "system detected uncorrectable ECC error"; break; case 0x204: reason = "SIO SERR occurred on PCI bus"; break; case 0x205: reason = "parity error detected by core logic"; break; case 0x206: reason = "SIO IOCHK occurred on ISA bus"; break; case 0x207: reason = "non-existent memory error"; break; case 0x208: reason = "MCHK_K_DCSR"; break; case 0x209: reason = "PCI SERR detected"; break; case 0x20b: reason = "PCI data parity error detected"; break; case 0x20d: reason = "PCI address parity error detected"; break; case 0x20f: reason = "PCI master abort error"; break; case 0x211: reason = "PCI target abort error"; break; case 0x213: reason = "scatter/gather PTE invalid error"; break; case 0x215: reason = "flash ROM write error"; break; case 0x217: reason = "IOA timeout detected"; break; case 0x219: reason = "IOCHK#, EISA add-in board parity or other catastrophic error"; break; case 0x21b: reason = "EISA fail-safe timer timeout"; break; case 0x21d: reason = "EISA bus time-out"; break; case 0x21f: reason = "EISA software generated NMI"; break; case 0x221: reason = "unexpected ev5 IRQ[3] interrupt"; break; default: reason = "unknown"; break; } printk(KERN_CRIT "machine check type: %s%s\n", reason, mchk_header->retry ? " (retryable)" : ""); dik_show_regs(regs, NULL);#if DEBUG_MCHECK > 1 { /* Dump the logout area to give all info. */ unsigned long *ptr = (unsigned long *)la_ptr; long i; for (i = 0; i < mchk_header->size / sizeof(long); i += 2) { printk(KERN_CRIT " +%8lx %016lx %016lx\n", i*sizeof(long), ptr[i], ptr[i+1]); } }#endif}/* * The special RTC interrupt type. The interrupt itself was * processed by PALcode, and comes in via entInt vector 1. */static void rtc_enable_disable(unsigned int irq) { }static unsigned int rtc_startup(unsigned int irq) { return 0; }struct irqaction timer_irqaction = { handler: timer_interrupt, flags: SA_INTERRUPT, name: "timer",};static struct hw_interrupt_type rtc_irq_type = { typename: "RTC", startup: rtc_startup, shutdown: rtc_enable_disable, enable: rtc_enable_disable, disable: rtc_enable_disable, ack: rtc_enable_disable, end: rtc_enable_disable,};void __initinit_rtc_irq(void){ irq_desc[RTC_IRQ].status = IRQ_DISABLED; irq_desc[RTC_IRQ].handler = &rtc_irq_type; setup_irq(RTC_IRQ, &timer_irqaction);}/* Dummy irqactions. */struct irqaction isa_cascade_irqaction = { handler: no_action, name: "isa-cascade"};struct irqaction timer_cascade_irqaction = { handler: no_action, name: "timer-cascade"};struct irqaction halt_switch_irqaction = { handler: no_action, name: "halt-switch"};
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -