config.in

Linux内核源代码 为压缩文件 是<<Linux内核>>一书中的源代码

#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/config-language.txt.
#

define_bool CONFIG_UID16 y

mainmenu_name "Linux/68k Kernel Configuration"

mainmenu_option next_comment
comment 'Code maturity level options'
bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
endmenu

mainmenu_option next_comment
comment 'Loadable module support'
bool 'Enable loadable module support' CONFIG_MODULES
if [ "$CONFIG_MODULES" = "y" ]; then
   bool '  Set version information on all module symbols' CONFIG_MODVERSIONS
   bool '  Kernel module loader' CONFIG_KMOD
fi
endmenu

mainmenu_option next_comment
comment 'Platform dependent setup'

define_bool CONFIG_ISA n
define_bool CONFIG_EISA n
define_bool CONFIG_MCA n
define_bool CONFIG_PCMCIA n

bool 'Amiga support' CONFIG_AMIGA
bool 'Atari support' CONFIG_ATARI
dep_bool '  Hades support' CONFIG_HADES $CONFIG_ATARI
if [ "$CONFIG_HADES" = "y" ]; then
   define_bool CONFIG_PCI y
else
   define_bool CONFIG_PCI n
fi  
bool 'Macintosh support' CONFIG_MAC
if [ "$CONFIG_MAC" = "y" ]; then
   define_bool CONFIG_NUBUS y
   define_bool CONFIG_M68K_L2_CACHE y
fi
bool 'Apollo support' CONFIG_APOLLO
bool 'VME (Motorola and BVM) support' CONFIG_VME
if [ "$CONFIG_VME" = "y" ]; then
   bool '  MVME147 support' CONFIG_MVME147
   bool '  MVME162, 166 and 167 support' CONFIG_MVME16x
   bool '  BVME4000 and BVME6000 support' CONFIG_BVME6000
fi
bool 'HP9000/300 support' CONFIG_HP300
if [ "$CONFIG_HP300" = "y" ]; then
   bool '  DIO bus support' CONFIG_DIO
fi
bool 'Sun3 support' CONFIG_SUN3
bool 'Sun3x support' CONFIG_SUN3X
  
bool 'Q40/Q60 support' CONFIG_Q40

comment 'Processor type'
bool '68020 support' CONFIG_M68020
bool '68030 support' CONFIG_M68030
bool '68040 support' CONFIG_M68040
bool '68060 support' CONFIG_M68060
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
   bool 'Math emulation support (EXPERIMENTAL)' CONFIG_M68KFPU_EMU
   if [ "$CONFIG_M68KFPU_EMU" = "y" ]; then
      bool '  Math emulation extra precision' CONFIG_M68KFPU_EMU_EXTRAPREC
      bool '  Math emulation only kernel' CONFIG_M68KFPU_EMU_ONLY
   fi
fi
bool 'Advanced configuration options' CONFIG_ADVANCED
if [ "$CONFIG_ADVANCED" = "y" ]; then
   bool 'Use read-modify-write instructions' CONFIG_RMW_INSNS
   if [ "$CONFIG_SUN3" = "y" ]; then
      define_bool CONFIG_SINGLE_MEMORY_CHUNK n
   else
      bool 'Use one physical chunk of memory only' CONFIG_SINGLE_MEMORY_CHUNK
   fi
   if [ "$CONFIG_M68060" = "y" ]; then
      bool 'Use write-through caching for 68060 supervisor accesses' CONFIG_060_WRITETHROUGH
   fi
fi
endmenu

mainmenu_option next_comment
comment 'General setup'

bool 'Networking support' CONFIG_NET
bool 'System V IPC' CONFIG_SYSVIPC
bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
bool 'Sysctl support' CONFIG_SYSCTL
if [ "$CONFIG_PROC_FS" = "y" ]; then
   choice 'Kernel core (/proc/kcore) format' \
	"ELF		CONFIG_KCORE_ELF	\
	 A.OUT		CONFIG_KCORE_AOUT" ELF
fi
tristate 'Kernel support for a.out binaries' CONFIG_BINFMT_AOUT
tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC

if [ "$CONFIG_AMIGA" = "y" ]; then
  bool 'Amiga Zorro (AutoConfig) bus support' CONFIG_ZORRO
  if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
     bool 'Amiga 1200/600 PCMCIA support (EXPERIMENTAL)' CONFIG_AMIGA_PCMCIA
  fi
fi
if [ "$CONFIG_ATARI" = "y" ]; then
   bool 'Support for ST-RAM as swap space' CONFIG_STRAM_SWAP
   bool 'ST-RAM statistics in /proc' CONFIG_STRAM_PROC
fi
if [ "$CONFIG_AMIGA" = "y" -o "$CONFIG_ATARI" = "y" ]; then
   bool 'Use power LED as a heartbeat' CONFIG_HEARTBEAT
else
  if [ "$CONFIG_HP300" = "y" ]; then
     # We have a dedicated heartbeat LED. :-)
     define_bool CONFIG_HEARTBEAT y
  fi
fi
bool '/proc/hardware support' CONFIG_PROC_HARDWARE

if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
   tristate 'Parallel port support (EXPERIMENTAL)' CONFIG_PARPORT
   if [ "$CONFIG_PARPORT" != "n" ]; then
      if [ "$CONFIG_AMIGA" != "n" ]; then
         dep_tristate '  Amiga builtin port' CONFIG_PARPORT_AMIGA $CONFIG_PARPORT
	 if [ "$CONFIG_ZORRO" != "n" ]; then
            dep_tristate '  Multiface III parallel port' CONFIG_PARPORT_MFC3 $CONFIG_PARPORT
	 fi
      fi
      if [ "$CONFIG_Q40" != "n" ]; then
	 if [ "$CONFIG_PARPORT" != "n" ]; then
	    define_bool CONFIG_PARPORT_PC y
	 fi
      fi
   fi
   if [ "$CONFIG_ATARI" = "y" ]; then
      dep_tristate '  Atari builtin port' CONFIG_PARPORT_ATARI $CONFIG_PARPORT
   fi
   dep_tristate '  Parallel printer support' CONFIG_PRINTER $CONFIG_PARPORT
   if [ "$CONFIG_PRINTER" != "n" ]; then
      bool '    Support IEEE1284 status readback' CONFIG_PRINTER_READBACK
   fi
fi

source drivers/pci/Config.in
source drivers/zorro/Config.in

endmenu

source drivers/mtd/Config.in

source drivers/block/Config.in

source drivers/md/Config.in

if [ "$CONFIG_NET" = "y" ]; then
   source net/Config.in
fi

if [ "$CONFIG_MAC" = "y" ]; then
   source drivers/input/Config.in
fi

mainmenu_option next_comment
comment 'ATA/IDE/MFM/RLL support'

tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE

if [ "$CONFIG_IDE" != "n" ]; then
  source drivers/ide/Config.in
else
  define_bool CONFIG_BLK_DEV_IDE_MODES n
  define_bool CONFIG_BLK_DEV_HD n
fi
endmenu

mainmenu_option next_comment
comment 'SCSI support'

tristate 'SCSI support' CONFIG_SCSI

if [ "$CONFIG_SCSI" != "n" ]; then

   comment 'SCSI support type (disk, tape, CD-ROM)'

   dep_tristate '  SCSI disk support' CONFIG_BLK_DEV_SD $CONFIG_SCSI
   if [ "$CONFIG_BLK_DEV_SD" != "n" ]; then
      int  'Maximum number of SCSI disks that can be loaded as modules' CONFIG_SD_EXTRA_DEVS 40
   fi
   dep_tristate '  SCSI tape support' CONFIG_CHR_DEV_ST $CONFIG_SCSI
   if [ "$CONFIG_BLK_DEV_ST" != "n" ]; then
      int  'Maximum number of SCSI tapes that can be loaded as modules' CONFIG_ST_EXTRA_DEVS 2
   fi
   dep_tristate '  SCSI CD-ROM support' CONFIG_BLK_DEV_SR $CONFIG_SCSI
   if [ "$CONFIG_BLK_DEV_SR" != "n" ]; then
      bool '    Enable vendor-specific extensions (for SCSI CDROM)' CONFIG_BLK_DEV_SR_VENDOR
      int  'Maximum number of CDROM devices that can be loaded as modules' CONFIG_SR_EXTRA_DEVS 2
   fi
   dep_tristate '  SCSI generic support' CONFIG_CHR_DEV_SG $CONFIG_SCSI

   comment 'Some SCSI devices (e.g. CD jukebox) support multiple LUNs'

   bool '  Probe all LUNs on each SCSI device' CONFIG_SCSI_MULTI_LUN

   bool '  Verbose SCSI error reporting (kernel size +=12K)' CONFIG_SCSI_CONSTANTS
   bool '  SCSI logging facility' CONFIG_SCSI_LOGGING

   mainmenu_option next_comment
   comment 'SCSI low-level drivers'

   if [ "$CONFIG_AMIGA" = "y" ]; then
      dep_tristate 'A3000 WD33C93A support' CONFIG_A3000_SCSI $CONFIG_SCSI
      if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
	 bool 'A4000T SCSI support (EXPERIMENTAL)' CONFIG_A4000T_SCSI
      fi
   fi
   if [ "$CONFIG_ZORRO" = "y" ]; then
      dep_tristate 'A2091 WD33C93A support' CONFIG_A2091_SCSI $CONFIG_SCSI
      dep_tristate 'GVP Series II WD33C93A support' CONFIG_GVP11_SCSI $CONFIG_SCSI
      dep_tristate 'CyberStorm SCSI support' CONFIG_CYBERSTORM_SCSI $CONFIG_SCSI
      dep_tristate 'CyberStorm Mk II SCSI support' CONFIG_CYBERSTORMII_SCSI $CONFIG_SCSI
      dep_tristate 'Blizzard 2060 SCSI support' CONFIG_BLZ2060_SCSI $CONFIG_SCSI
      dep_tristate 'Blizzard 1230IV/1260 SCSI support' CONFIG_BLZ1230_SCSI $CONFIG_SCSI
      dep_tristate 'Fastlane SCSI support' CONFIG_FASTLANE_SCSI $CONFIG_SCSI
      if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
	 bool 'A4091 SCSI support (EXPERIMENTAL)' CONFIG_A4091_SCSI
	 bool 'WarpEngine SCSI support (EXPERIMENTAL)' CONFIG_WARPENGINE_SCSI
	 bool 'Blizzard PowerUP 603e+ SCSI (EXPERIMENTAL)' CONFIG_BLZ603EPLUS_SCSI
	 dep_tristate 'BSC Oktagon SCSI support (EXPERIMENTAL)' CONFIG_OKTAGON_SCSI $CONFIG_SCSI
#	 bool 'Cyberstorm Mk III SCSI support (EXPERIMENTAL)' CONFIG_CYBERSTORMIII_SCSI
#	 bool 'GVP Turbo 040/060 SCSI support (EXPERIMENTAL)' CONFIG_GVP_TURBO_SCSI
      fi
   fi
   if [ "$CONFIG_ATARI" = "y" ]; then
      dep_tristate 'Atari native SCSI support' CONFIG_ATARI_SCSI $CONFIG_SCSI
      if [ "$CONFIG_ATARI_SCSI" != "n" ]; then
	 bool '  Long delays for Toshiba CD-ROMs' CONFIG_ATARI_SCSI_TOSHIBA_DELAY
	 bool '  Reset SCSI-devices at boottime' CONFIG_ATARI_SCSI_RESET_BOOT
	 if [ "$CONFIG_HADES" = "y" ]; then
	    bool '  Hades SCSI DMA emulator' CONFIG_TT_DMA_EMUL
	 fi
      fi
   fi
   if [ "$CONFIG_MAC" = "y" ]; then
      bool 'Macintosh NCR5380 SCSI' CONFIG_MAC_SCSI
      dep_tristate 'Macintosh NCR53c9[46] SCSI' CONFIG_SCSI_MAC_ESP $CONFIG_SCSI
   fi
#   dep_tristate 'SCSI debugging host adapter' CONFIG_SCSI_DEBUG $CONFIG_SCSI

   if [ "$CONFIG_VME" = "y" -a "$CONFIG_MVME147" = "y" ]; then
      bool 'WD33C93 SCSI driver for MVME147' CONFIG_MVME147_SCSI
   fi

   if [ "$CONFIG_VME" = "y" -a "$CONFIG_MVME16x" = "y" ]; then
      bool 'NCR53C710 SCSI driver for MVME16x' CONFIG_MVME16x_SCSI
   fi

   if [ "$CONFIG_VME" = "y" -a "$CONFIG_BVME6000" = "y" ]; then
      bool 'NCR53C710 SCSI driver for BVME6000' CONFIG_BVME6000_SCSI
   fi

   if [ "$CONFIG_SUN3" = "y" ]; then
	dep_tristate 'Sun3 NCR5380 SCSI' CONFIG_SUN3_SCSI $CONFIG_SCSI
   fi

   if [ "$CONFIG_SUN3X" = "y" ]; then
      bool 'ESP SCSI driver' CONFIG_SUN3X_ESP
   fi