config.in

Linux内核源代码 为压缩文件 是<<Linux内核>>一书中的源代码

mainmenu_name "Kernel configuration of Linux for IA-64 machines"

mainmenu_option next_comment
 comment 'Code maturity level options'
 bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
endmenu

mainmenu_option next_comment
comment 'Loadable module support'
bool 'Enable loadable module support' CONFIG_MODULES
if [ "$CONFIG_MODULES" = "y" ]; then
   bool '  Set version information on all module symbols' CONFIG_MODVERSIONS
   bool '  Kernel module loader' CONFIG_KMOD
fi
endmenu

mainmenu_option next_comment
comment 'General setup'

define_bool CONFIG_IA64 y

define_bool CONFIG_ISA n
define_bool CONFIG_EISA n
define_bool CONFIG_MCA n
define_bool CONFIG_SBUS n

choice 'IA-64 system type'					\
	"generic		CONFIG_IA64_GENERIC		\
	 DIG-compliant		CONFIG_IA64_DIG			\
	 HP-simulator		CONFIG_IA64_HP_SIM		\
	 SGI-SN1		CONFIG_IA64_SGI_SN1" generic

choice 'Kernel page size'						\
	"4KB			CONFIG_IA64_PAGE_SIZE_4KB		\
	 8KB			CONFIG_IA64_PAGE_SIZE_8KB		\
	 16KB			CONFIG_IA64_PAGE_SIZE_16KB		\
	 64KB			CONFIG_IA64_PAGE_SIZE_64KB" 16KB

if [ "$CONFIG_IA64_DIG" = "y" ]; then
	define_bool CONFIG_ITANIUM y
	define_bool CONFIG_IA64_BRL_EMU y
	bool '  Enable Itanium A-step specific code' CONFIG_ITANIUM_ASTEP_SPECIFIC
	bool '  Enable Itanium B-step specific code' CONFIG_ITANIUM_BSTEP_SPECIFIC
	if [ "$CONFIG_ITANIUM_BSTEP_SPECIFIC" = "y" ]; then
	  bool '   Enable Itanium B0-step specific code' CONFIG_ITANIUM_B0_SPECIFIC
	  bool '   Enable Itanium B1-step specific code' CONFIG_ITANIUM_B1_SPECIFIC
	  bool '   Enable Itanium B2-step specific code' CONFIG_ITANIUM_B2_SPECIFIC
	fi
	bool '  Enable Itanium C-step specific code' CONFIG_ITANIUM_CSTEP_SPECIFIC
	if [ "$CONFIG_ITANIUM_CSTEP_SPECIFIC" = "y" ]; then
	  bool '   Enable Itanium C0-step specific code' CONFIG_ITANIUM_C0_SPECIFIC
	fi
	bool '  Force interrupt redirection' CONFIG_IA64_HAVE_IRQREDIR
	bool '  Enable use of global TLB purge instruction (ptc.g)' CONFIG_ITANIUM_PTCG
	bool '  Enable SoftSDV hacks' CONFIG_IA64_SOFTSDV_HACKS
	bool '  Enable AzusA hacks' CONFIG_IA64_AZUSA_HACKS
	bool '  Enable IA-64 Machine Check Abort' CONFIG_IA64_MCA
	bool '  Enable ACPI 2.0 with errata 1.3' CONFIG_ACPI20
	bool '  ACPI kernel configuration manager (EXPERIMENTAL)' CONFIG_ACPI_KERNEL_CONFIG
	if [ "$CONFIG_ACPI_KERNEL_CONFIG" = "y" ]; then
	  define_bool CONFIG_PM y
	  define_bool CONFIG_ACPI y
	  define_bool CONFIG_ACPI_INTERPRETER y
	fi
fi

if [ "$CONFIG_IA64_SGI_SN1" = "y" ]; then
	bool '  Enable use of global TLB purge instruction (ptc.g)' CONFIG_ITANIUM_PTCG
	bool '  Enable Itanium B-step specific code' CONFIG_ITANIUM_BSTEP_SPECIFIC
	if [ "$CONFIG_ITANIUM_BSTEP_SPECIFIC" = "y" ]; then
	  bool '    Enable Itanium B0-step specific code' CONFIG_ITANIUM_B0_SPECIFIC
	fi
	bool '  Enable SGI Medusa Simulator Support' CONFIG_IA64_SGI_SN1_SIM n
	define_bool CONFIG_DEVFS_DEBUG y
	define_bool CONFIG_DEVFS_FS y
	define_bool CONFIG_IA64_BRL_EMU y
	define_bool CONFIG_IA64_MCA y
	define_bool CONFIG_ITANIUM y
	define_bool CONFIG_SGI_IOC3_ETH y
	define_bool CONFIG_PERCPU_IRQ y
	define_int  CONFIG_CACHE_LINE_SHIFT 7
	bool '  Enable DISCONTIGMEM support' CONFIG_DISCONTIGMEM y
	bool '	Enable NUMA support' CONFIG_NUMA y
fi

define_bool CONFIG_KCORE_ELF y	# On IA-64, we always want an ELF /proc/kcore.

bool 'SMP support' CONFIG_SMP
bool 'Performance monitor support' CONFIG_PERFMON
bool '/proc/pal support' CONFIG_IA64_PALINFO

bool 'Networking support' CONFIG_NET
bool 'System V IPC' CONFIG_SYSVIPC
bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
bool 'Sysctl support' CONFIG_SYSCTL
tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC

if [ "$CONFIG_IA64_HP_SIM" = "n" ]; then

bool 'PCI support' CONFIG_PCI
source drivers/pci/Config.in

bool 'Support for hot-pluggable devices' CONFIG_HOTPLUG
if [ "$CONFIG_HOTPLUG" = "y" ]; then
   source drivers/pcmcia/Config.in
else
   define_bool CONFIG_PCMCIA n
fi

source drivers/parport/Config.in

fi # !HP_SIM

endmenu

if [ "$CONFIG_NET" = "y" ]; then
  source net/Config.in
fi

if [ "$CONFIG_IA64_HP_SIM" = "n" ]; then

source drivers/mtd/Config.in
source drivers/pnp/Config.in
source drivers/block/Config.in
source drivers/i2o/Config.in
source drivers/md/Config.in

mainmenu_option next_comment
comment 'ATA/IDE/MFM/RLL support'

tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE

if [ "$CONFIG_IDE" != "n" ]; then
  source drivers/ide/Config.in
else
  define_bool CONFIG_BLK_DEV_IDE_MODES n
  define_bool CONFIG_BLK_DEV_HD n
fi
endmenu

fi # !HP_SIM

mainmenu_option next_comment
comment 'SCSI support'

tristate 'SCSI support' CONFIG_SCSI

if [ "$CONFIG_SCSI" != "n" ]; then
  source drivers/scsi/Config.in
fi
endmenu

if [ "$CONFIG_IA64_HP_SIM" = "n" ]; then

if [ "$CONFIG_NET" = "y" ]; then
  mainmenu_option next_comment
  comment 'Network device support'

  bool 'Network device support' CONFIG_NETDEVICES
  if [ "$CONFIG_NETDEVICES" = "y" ]; then
    source drivers/net/Config.in
  fi
  endmenu
fi

source net/ax25/Config.in

mainmenu_option next_comment
comment 'ISDN subsystem'

tristate 'ISDN support' CONFIG_ISDN
if [ "$CONFIG_ISDN" != "n" ]; then
  source drivers/isdn/Config.in
fi
endmenu

mainmenu_option next_comment
comment 'CD-ROM drivers (not for SCSI or IDE/ATAPI drives)'

bool 'Support non-SCSI/IDE/ATAPI drives' CONFIG_CD_NO_IDESCSI
if [ "$CONFIG_CD_NO_IDESCSI" != "n" ]; then
  source drivers/cdrom/Config.in
fi
endmenu

fi # !HP_SIM

#
# input before char - char/joystick depends on it. As does USB.
#
source drivers/input/Config.in
source drivers/char/Config.in

#source drivers/misc/Config.in

source drivers/media/Config.in

source fs/Config.in

if [ "$CONFIG_VT" = "y" ]; then
  mainmenu_option next_comment
  comment 'Console drivers'
  bool 'VGA text console' CONFIG_VGA_CONSOLE
  source drivers/video/Config.in
  if [ "$CONFIG_FB" = "y" ]; then
    define_bool CONFIG_PCI_CONSOLE y
  fi
  endmenu
fi

if [ "$CONFIG_IA64_HP_SIM" = "n" ]; then

mainmenu_option next_comment
comment 'Sound'

tristate 'Sound card support' CONFIG_SOUND
if [ "$CONFIG_SOUND" != "n" ]; then
  source drivers/sound/Config.in
fi
endmenu

source drivers/usb/Config.in

fi # !HP_SIM

if [ "$CONFIG_IA64_HP_SIM" != "n" -o "$CONFIG_IA64_GENERIC" != "n" ]; then
  mainmenu_option next_comment
  comment 'Simulated drivers'

  tristate 'Simulated Ethernet ' CONFIG_SIMETH
  bool 'Simulated serial driver support' CONFIG_SIM_SERIAL
  if [ "$CONFIG_SCSI" != "n" ]; then
    bool 'Simulated SCSI disk' CONFIG_SCSI_SIM
  fi
  endmenu
fi


mainmenu_option next_comment
comment 'Kernel hacking'

#bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
  tristate 'Kernel support for IA-32 emulation' CONFIG_IA32_SUPPORT
  tristate 'Kernel FP software completion' CONFIG_MATHEMU
else
  define_bool CONFIG_MATHEMU y
fi

bool 'Magic SysRq key' CONFIG_MAGIC_SYSRQ
bool 'Early printk support (requires VGA!)' CONFIG_IA64_EARLY_PRINTK
bool 'Turn on compare-and-exchange bug checking (slow!)' CONFIG_IA64_DEBUG_CMPXCHG
bool 'Turn on irq debug checks (slow!)' CONFIG_IA64_DEBUG_IRQ
bool 'Print possible IA64 hazards to console' CONFIG_IA64_PRINT_HAZARDS
bool 'Enable new unwind support' CONFIG_IA64_NEW_UNWIND
bool 'Disable VHPT' CONFIG_DISABLE_VHPT

endmenu