l1_command.c

Linux内核源代码 为压缩文件 是<<Linux内核>>一书中的源代码

}


int elsc_power_cycle(elsc_t *e)
{
    /* shush compiler */
    e = e;

    /* fill in buffer with the opcode & params; call sc_command */

    return 0;
}


/*
 * L1 Support for reading 
 * cbrick uid.
 */

int elsc_nic_get(elsc_t *e, uint64_t *nic, int verbose)
{
    /* this parameter included only for SN0 compatibility */
    verbose = verbose;

    /* We don't go straight to the bedrock/L1 protocol on this one, but let
     * the eeprom layer prepare the eeprom data as we would like it to
     * appear to the caller
     */
    return cbrick_uid_get( e->nasid, nic );
}

int _elsc_hbt(elsc_t *e, int ival, int rdly)
{
    e = e;
    ival = ival;
    rdly = rdly;

    /* fill in buffer with the opcode & params; call elsc_command */

    return 0;
}


/* send a command string to an L1 */
int sc_command_interp( l1sc_t *sc, l1addr_t compt, l1addr_t rack, l1addr_t bay,
		       char *cmd )
{
    char        msg[BRL1_QSIZE];
    int         len;    /* length of message being sent */
    int         subch;  /* system controller subchannel used */
    l1addr_t	target; /* target system controller for command */

    /* fill in msg with the opcode & params */
    bzero( msg, BRL1_QSIZE );
    subch = sc_open( sc, L1_ADDR_LOCAL );

    L1_BUILD_ADDR( &target, compt, rack, bay, L1_ADDR_TASK_CMD );
    if( (len = sc_construct_msg( sc, subch, msg, BRL1_QSIZE,
				 target, L1_REQ_EXEC_CMD, 2,
				 L1_ARG_ASCII, cmd )) < 0 )
    {
	sc_close( sc, subch );
	return( ELSC_ERROR_CMD_ARGS );
    }
		   
    /* send the request to the L1 */
    if( sc_command( sc, subch, msg, msg, &len ) < 0 )
    {
	sc_close( sc, subch );
	return( ELSC_ERROR_CMD_SEND );
    }

    /* free up subchannel */
    sc_close( sc, subch );
    
    /* check response */
    if( sc_interpret_resp( msg, 0 ) < 0 )
    {
	return( ELSC_ERROR_RESP_FORMAT );
    }

    return 0;
}


/*
 * Routines for reading the R-brick's L1
 */

int router_module_get( nasid_t nasid, net_vec_t path )
{
    uint rnum, rack, bay, t;
    int ret;
    l1sc_t sc;

    /* prepare l1sc_t struct */
    sc_init( &sc, nasid, path );

    /* construct module ID from rack and slot info */

    if ((ret = elsc_rack_bay_get(&sc, &rnum, &bay)) < 0)
	return ret;

    /* report unset location info. with a special, otherwise invalid modid */
    if (rnum == 0 && bay == 0)
	return MODULE_NOT_SET;

    if (bay > MODULE_BPOS_MASK >> MODULE_BPOS_SHFT)
	return ELSC_ERROR_MODULE;

    /* Build a moduleid_t-compatible rack number */

    rack = 0;		
    t = rnum / 100;		/* rack class (CPU/IO) */
    if (t > RACK_CLASS_MASK(rack) >> RACK_CLASS_SHFT(rack))
	return ELSC_ERROR_MODULE;
    RACK_ADD_CLASS(rack, t);
    rnum %= 100;

    t = rnum / 10;		/* rack group */
    if (t > RACK_GROUP_MASK(rack) >> RACK_GROUP_SHFT(rack))
	return ELSC_ERROR_MODULE;
    RACK_ADD_GROUP(rack, t);

    t = rnum % 10;		/* rack number (one-based) */
    if (t-1 > RACK_NUM_MASK(rack) >> RACK_NUM_SHFT(rack))
	return ELSC_ERROR_MODULE;
    RACK_ADD_NUM(rack, t);

    ret = RBT_TO_MODULE(rack, bay, MODULE_RBRICK);
    return ret;
}
    

/*
 * iobrick routines
 */

/* iobrick_rack_bay_type_get fills in the three int * arguments with the
 * rack number, bay number and brick type of the L1 being addressed.  Note
 * that if the L1 operation fails and this function returns an error value, 
 * garbage may be written to brick_type.
 */
int iobrick_rack_bay_type_get( l1sc_t *sc, uint *rack, 
			       uint *bay, uint *brick_type )
{
    char msg[BRL1_QSIZE];       /* L1 request/response info */
    int subch;                  /* system controller subchannel used */
    int len;                    /* length of message */
    uint32_t buf32;	        /* used to copy 32-bit rack & bay out of msg */

    /* fill in msg with the opcode & params */
    bzero( msg, BRL1_QSIZE );
    if( (subch = sc_open( sc, L1_ADDR_LOCALIO )) < 0 ) {
	return( ELSC_ERROR_CMD_SEND );
    }

    if( (len = sc_construct_msg( sc, subch, msg, BRL1_QSIZE,
				 L1_ADDR_TASK_GENERAL,
				 L1_REQ_RRBT, 0 )) < 0 )
    {
	sc_close( sc, subch );
	return( ELSC_ERROR_CMD_ARGS );
    }

    /* send the request to the L1 */
    if( sc_command( sc, subch, msg, msg, &len ) ) {
	sc_close( sc, subch );
	return( ELSC_ERROR_CMD_SEND );
    }

    /* free up subchannel */
    sc_close( sc, subch );

    /* check response */
    if( sc_interpret_resp( msg, 4, L1_ARG_INT, &buf32, 
			           L1_ARG_INT, brick_type ) < 0 )
    {
	return( ELSC_ERROR_RESP_FORMAT );
    }

    /* extract rack/bay info
     *
     * note that the 32-bit value returned by the L1 actually
     * only uses the low-order sixteen bits for rack and bay
     * information.  A "normal" L1 address puts rack and bay
     * information in bit positions 12 through 28.  So if
     * we initially shift the value returned 12 bits to the left,
     * we can use the L1 addressing #define's to extract the
     * values we need (see ksys/l1.h for a complete list of the
     * various fields of an L1 address).
     */
    buf32 <<= L1_ADDR_BAY_SHFT;

    *rack = (buf32 & L1_ADDR_RACK_MASK) >> L1_ADDR_RACK_SHFT;
    *bay = (buf32 & L1_ADDR_BAY_MASK) >> L1_ADDR_BAY_SHFT;

    return 0;
}


int iobrick_module_get(l1sc_t *sc)
{
    uint rnum, rack, bay, brick_type, t;
    int ret;

    /* construct module ID from rack and slot info */

    if ((ret = iobrick_rack_bay_type_get(sc, &rnum, &bay, &brick_type)) < 0)
        return ret;

    /* report unset location info. with a special, otherwise invalid modid */
    if (rnum == 0 && bay == 0)
        return MODULE_NOT_SET;

    if (bay > MODULE_BPOS_MASK >> MODULE_BPOS_SHFT)
        return ELSC_ERROR_MODULE;

    /* Build a moduleid_t-compatible rack number */

    rack = 0;           
    t = rnum / 100;             /* rack class (CPU/IO) */
    if (t > RACK_CLASS_MASK(rack) >> RACK_CLASS_SHFT(rack))
        return ELSC_ERROR_MODULE;
    RACK_ADD_CLASS(rack, t);
    rnum %= 100;

    t = rnum / 10;              /* rack group */
    if (t > RACK_GROUP_MASK(rack) >> RACK_GROUP_SHFT(rack))
        return ELSC_ERROR_MODULE;
    RACK_ADD_GROUP(rack, t);

    t = rnum % 10;              /* rack number (one-based) */
    if (t-1 > RACK_NUM_MASK(rack) >> RACK_NUM_SHFT(rack))
        return ELSC_ERROR_MODULE;
    RACK_ADD_NUM(rack, t);

    switch( brick_type ) {
      case 'I': 
	brick_type = MODULE_IBRICK; break;
      case 'P':
	brick_type = MODULE_PBRICK; break;
      case 'X':
	brick_type = MODULE_XBRICK; break;
    }

    ret = RBT_TO_MODULE(rack, bay, brick_type);

    return ret;
}

/* iobrick_get_sys_snum asks the attached iobrick for the system
 * serial number.  This function will only be relevant to the master
 * cbrick (the one attached to the bootmaster ibrick); other nodes
 * may call the function, but the value returned to the master node
 * will be the one used as the system serial number by the kernel.
 */

int
iobrick_get_sys_snum( l1sc_t *sc, char *snum_str )
{
    char msg[BRL1_QSIZE];       /* L1 request/response info */
    int subch;                  /* system controller subchannel used */
    int len;                    /* length of message */
    
    /* fill in msg with the opcode & params */
    bzero( msg, BRL1_QSIZE );
    if( (subch = sc_open( sc, L1_ADDR_LOCALIO )) < 0 ) {
	return( ELSC_ERROR_CMD_SEND );
    }

    if( (len = sc_construct_msg( sc, subch, msg, BRL1_QSIZE,
				 L1_ADDR_TASK_GENERAL,
				 L1_REQ_SYS_SERIAL, 0 )) < 0 )
    {
	sc_close( sc, subch );
	return( ELSC_ERROR_CMD_ARGS );
    }

    /* send the request to the L1 */
    if( sc_command( sc, subch, msg, msg, &len ) ) {
	sc_close( sc, subch );
	return( ELSC_ERROR_CMD_SEND );
    }

    /* free up subchannel */
    sc_close( sc, subch );

    /* check response */
    return( sc_interpret_resp( msg, 2, L1_ARG_ASCII, snum_str ) );
}


/*
 * The following functions apply (or cut off) power to the specified
 * pci bus or slot.
 */

int
iobrick_pci_slot_pwr( l1sc_t *sc, int bus, int slot, int up )
{
    char cmd[BRL1_QSIZE];
    unsigned rack, bay, brick_type;
    if( iobrick_rack_bay_type_get( sc, &rack, &bay, &brick_type ) < 0 )
	return( ELSC_ERROR_CMD_SEND );
    sprintf( cmd, "pci %d %d %s", bus, slot,
	     (up ? "u" : "d") );
    return( sc_command_interp
	    ( sc, L1_ADDR_TYPE_L1, rack, bay, cmd ) );
}

int
iobrick_pci_bus_pwr( l1sc_t *sc, int bus, int up )
{
    char cmd[BRL1_QSIZE];
    unsigned rack, bay, brick_type;
    if( iobrick_rack_bay_type_get( sc, &rack, &bay, &brick_type ) < 0 )
	return( ELSC_ERROR_CMD_SEND );
    sprintf( cmd, "pci %d %s", bus, (up ? "u" : "d") );
    return( sc_command_interp
	    ( sc, L1_ADDR_TYPE_L1, rack, bay, cmd ) );
}


/* get the L1 firmware version for an iobrick */
int
iobrick_sc_version( l1sc_t *sc, char *result )
{
    char	msg[BRL1_QSIZE];
    int		len;    /* length of message being sent */
    int		subch;  /* system controller subchannel used */
    int		major,  /* major rev number */
	        minor,  /* minor rev number */
                bugfix; /* bugfix rev number */

    /* fill in msg with the opcode & params */
    bzero( msg, BRL1_QSIZE );
    subch = sc_open( sc, L1_ADDR_LOCALIO );

    if( (len = sc_construct_msg( sc, subch, msg, BRL1_QSIZE,
				 L1_ADDR_TASK_GENERAL,
				 L1_REQ_FW_REV, 0 )) < 0 )
    {
	sc_close( sc, subch );
	return( ELSC_ERROR_CMD_ARGS );
    }

    /* send the request to the L1 */
    if( SC_COMMAND(sc, subch, msg, msg, &len ) < 0 )
    {
	sc_close( sc, subch );
	return( ELSC_ERROR_CMD_SEND );
    }

    /* free up subchannel */
    sc_close( sc, subch );

    /* check response */
    if( sc_interpret_resp( msg, 6, L1_ARG_INT, &major,
			   L1_ARG_INT, &minor, L1_ARG_INT, &bugfix )
	< 0 )
    {
	return( ELSC_ERROR_RESP_FORMAT );
    }

    sprintf( result, "%d.%d.%d", major, minor, bugfix );

    return 0;
}



/* elscuart routines 
 *
 * Most of the elscuart functionality is implemented in l1.c.  The following
 * is directly "recycled" from elsc.c.
 */


/*
 * _elscuart_puts
 */

int _elscuart_puts(elsc_t *e, char *s)
{
    int			c;

    if (s == 0)
	s = "<NULL>";

    while ((c = LBYTE(s)) != 0) {
	if (_elscuart_putc(e, c) < 0)
	    return -1;
	s++;
    }

    return 0;
}


/*
 * elscuart wrapper routines
 *
 *   The following routines are similar to their counterparts in l1.c,
 *   except instead of taking an elsc_t pointer directly, they call
 *   a global routine "get_elsc" to obtain the pointer.
 *   This is useful when the elsc is employed for stdio.
 */

int elscuart_probe(void)
{
    return _elscuart_probe(get_elsc());
}

void elscuart_init(void *init_data)
{
    _elscuart_init(get_elsc());
    /* dummy variable included for driver compatability */
    init_data = init_data;
}

int elscuart_poll(void)
{
    return _elscuart_poll(get_elsc());
}

int elscuart_readc(void)
{
    return _elscuart_readc(get_elsc());
}

int elscuart_getc(void)
{
    return _elscuart_getc(get_elsc());
}

int elscuart_puts(char *s)
{
    return _elscuart_puts(get_elsc(), s);
}

int elscuart_putc(int c)
{
    return _elscuart_putc(get_elsc(), c);
}

int elscuart_flush(void)
{
    return _elscuart_flush(get_elsc());
}