📄 setup.c
字号:
/* * arch/mips/ddb5074/setup.c -- NEC DDB Vrc-5074 setup routines * * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com> * Sony Software Development Center Europe (SDCE), Brussels * * $Id: setup.c,v 1.1 2000/01/26 00:07:44 ralf Exp $ */#include <linux/config.h>#include <linux/init.h>#include <linux/kbd_ll.h>#include <linux/kernel.h>#include <linux/kdev_t.h>#include <linux/types.h>#include <linux/console.h>#include <linux/sched.h>#include <linux/mc146818rtc.h>#include <linux/pc_keyb.h>#include <linux/pci.h>#include <linux/ide.h>#include <asm/addrspace.h>#include <asm/bcache.h>#include <asm/keyboard.h>#include <asm/irq.h>#include <asm/reboot.h>#include <asm/gdb-stub.h>#include <asm/nile4.h>#include <asm/ddb5074.h>#ifdef CONFIG_REMOTE_DEBUGextern void rs_kgdb_hook(int);extern void breakpoint(void);#endif#if defined(CONFIG_SERIAL_CONSOLE)extern void console_setup(char *);#endifextern struct ide_ops std_ide_ops;extern struct rtc_ops ddb_rtc_ops;static void (*back_to_prom)(void) = (void (*)(void))0xbfc00000;static void ddb_machine_restart(char *command){ u32 t; /* PCI cold reset */ t = nile4_in32(NILE4_PCICTRL+4); t |= 0x40000000; nile4_out32(NILE4_PCICTRL+4, t); /* CPU cold reset */ t = nile4_in32(NILE4_CPUSTAT); t |= 1; nile4_out32(NILE4_CPUSTAT, t); /* Call the PROM */ back_to_prom();}static void ddb_machine_halt(void){ printk("DDB Vrc-5074 halted.\n"); do {} while (1);}static void ddb_machine_power_off(void){ printk("DDB Vrc-5074 halted. Please turn off the power.\n"); do {} while (1);}extern void ddb_irq_setup(void);void (*board_time_init)(struct irqaction *irq);static void __init ddb_time_init(struct irqaction *irq){ /* set the clock to 1 Hz */ nile4_out32(NILE4_T2CTRL, 1000000); /* enable the General-Purpose Timer */ nile4_out32(NILE4_T2CTRL+4, 0x00000001); /* reset timer */ nile4_out32(NILE4_T2CNTR, 0); /* enable interrupt */ nile4_enable_irq(NILE4_INT_GPT); i8259_setup_irq(nile4_to_irq(NILE4_INT_GPT), irq); set_cp0_status(ST0_IM, IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4);}void __init ddb_setup(void){ extern int panic_timeout; irq_setup = ddb_irq_setup; mips_io_port_base = NILE4_PCI_IO_BASE; isa_slot_offset = NILE4_PCI_MEM_BASE; request_region(0x00, 0x20, "dma1"); request_region(0x40, 0x20, "timer"); request_region(0x70, 0x10, "rtc"); request_region(0x80, 0x10, "dma page reg"); request_region(0xc0, 0x20, "dma2"); board_time_init = ddb_time_init; _machine_restart = ddb_machine_restart; _machine_halt = ddb_machine_halt; _machine_power_off = ddb_machine_power_off;#ifdef CONFIG_BLK_DEV_IDE ide_ops = &std_ide_ops;#endif rtc_ops = &ddb_rtc_ops; /* Reboot on panic */ panic_timeout = 180;}int __init page_is_ram(unsigned long pagenr){ return 1;}#define USE_NILE4_SERIAL 0#if USE_NILE4_SERIAL#define ns16550_in(reg) nile4_in8((reg)*8)#define ns16550_out(reg, val) nile4_out8((reg)*8, (val))#else#define NS16550_BASE (NILE4_PCI_IO_BASE+0x03f8)static inline u8 ns16550_in(u32 reg){ return *(volatile u8 *)(NS16550_BASE+reg);}static inline void ns16550_out(u32 reg, u8 val){ *(volatile u8 *)(NS16550_BASE+reg) = val;}#endif#define NS16550_RBR 0#define NS16550_THR 0#define NS16550_DLL 0#define NS16550_IER 1#define NS16550_DLM 1#define NS16550_FCR 2#define NS16550_IIR 2#define NS16550_LCR 3#define NS16550_MCR 4#define NS16550_LSR 5#define NS16550_MSR 6#define NS16550_SCR 7#define NS16550_LSR_DR 0x01 /* Data ready */#define NS16550_LSR_OE 0x02 /* Overrun */#define NS16550_LSR_PE 0x04 /* Parity error */#define NS16550_LSR_FE 0x08 /* Framing error */#define NS16550_LSR_BI 0x10 /* Break */#define NS16550_LSR_THRE 0x20 /* Xmit holding register empty */#define NS16550_LSR_TEMT 0x40 /* Xmitter empty */#define NS16550_LSR_ERR 0x80 /* Error */void _serinit(void){#if USE_NILE4_SERIAL ns16550_out(NS16550_LCR, 0x80); ns16550_out(NS16550_DLM, 0x00); ns16550_out(NS16550_DLL, 0x36); /* 9600 baud */ ns16550_out(NS16550_LCR, 0x00); ns16550_out(NS16550_LCR, 0x03); ns16550_out(NS16550_FCR, 0x47);#else /* done by PMON */#endif}void _putc(char c){ while (!(ns16550_in(NS16550_LSR) & NS16550_LSR_THRE)); ns16550_out(NS16550_THR, c); if (c == '\n') { while (!(ns16550_in(NS16550_LSR) & NS16550_LSR_THRE)); ns16550_out(NS16550_THR, '\r'); }}void _puts(const char *s){ char c; while ((c = *s++)) _putc(c);}char _getc(void){ while (!(ns16550_in(NS16550_LSR) & NS16550_LSR_DR)); return ns16550_in(NS16550_RBR);}int _testc(void){ return (ns16550_in(NS16550_LSR) & NS16550_LSR_DR) != 0;} /* * Hexadecimal 7-segment LED */void ddb5074_led_hex(int hex){ outb(hex, 0x80);} /* * LEDs D2 and D3, connected to the GPIO pins of the PMU in the ALi M1543 */struct pci_dev *pci_pmu = NULL;void ddb5074_led_d2(int on){ u8 t; if (pci_pmu) { pci_read_config_byte(pci_pmu, 0x7e, &t); if (on) t &= 0x7f; else t |= 0x80; pci_write_config_byte(pci_pmu, 0x7e, t); }}void ddb5074_led_d3(int on){ u8 t; if (pci_pmu) { pci_read_config_byte(pci_pmu, 0x7e, &t); if (on) t &= 0xbf; else t |= 0x40; pci_write_config_byte(pci_pmu, 0x7e, t); }}
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -