signal.c

Linux内核源代码 为压缩文件 是<<Linux内核>>一书中的源代码

	COPY(regs[12]);	COPY(regs[13]);
	COPY(regs[14]);	COPY(regs[15]);
	COPY(gbr);	COPY(mach);
	COPY(macl);	COPY(pr);
	COPY(sr);	COPY(pc);
#undef COPY

#if defined(__SH4__)
	err |= save_sigcontext_fpu(sc);
#endif

	/* non-iBCS2 extensions.. */
	err |= __put_user(mask, &sc->oldmask);

	return err;
}

/*
 * Determine which stack to use..
 */
static inline void *
get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size)
{
	if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && ! on_sig_stack(sp))
		sp = current->sas_ss_sp + current->sas_ss_size;

	return (void *)((sp - frame_size) & -8ul);
}

static void setup_frame(int sig, struct k_sigaction *ka,
			sigset_t *set, struct pt_regs *regs)
{
	struct sigframe *frame;
	int err = 0;
	int signal;

	frame = get_sigframe(ka, regs->regs[15], sizeof(*frame));

	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
		goto give_sigsegv;

	signal = current->exec_domain
		&& current->exec_domain->signal_invmap
		&& sig < 32
		? current->exec_domain->signal_invmap[sig]
		: sig;

	err |= setup_sigcontext(&frame->sc, regs, set->sig[0]);

	if (_NSIG_WORDS > 1) {
		err |= __copy_to_user(frame->extramask, &set->sig[1],
				      sizeof(frame->extramask));
	}

	/* Set up to return from userspace.  If provided, use a stub
	   already in userspace.  */
	if (ka->sa.sa_flags & SA_RESTORER) {
		regs->pr = (unsigned long) ka->sa.sa_restorer;
	} else {
		/* This is : mov  #__NR_sigreturn,r3 ; trapa #0x10 */
#ifdef __LITTLE_ENDIAN__
		unsigned long code = 0xc310e300 | (__NR_sigreturn);
#else
		unsigned long code = 0xe300c310 | (__NR_sigreturn << 16);
#endif

		regs->pr = (unsigned long) frame->retcode;
		err |= __put_user(code, (long *)(frame->retcode+0));
	}

	if (err)
		goto give_sigsegv;

	/* Set up registers for signal handler */
	regs->regs[15] = (unsigned long) frame;
	regs->regs[4] = signal; /* Arg for signal handler */
	regs->pc = (unsigned long) ka->sa.sa_handler;

	set_fs(USER_DS);

#if DEBUG_SIG
	printk("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
		current->comm, current->pid, frame, regs->pc, regs->pr);
#endif

	flush_icache_range(regs->pr, regs->pr+4);
	return;

give_sigsegv:
	if (sig == SIGSEGV)
		ka->sa.sa_handler = SIG_DFL;
	force_sig(SIGSEGV, current);
}

static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
			   sigset_t *set, struct pt_regs *regs)
{
	struct rt_sigframe *frame;
	int err = 0;
	int signal;

	frame = get_sigframe(ka, regs->regs[15], sizeof(*frame));

	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
		goto give_sigsegv;

	signal = current->exec_domain
		&& current->exec_domain->signal_invmap
		&& sig < 32
		? current->exec_domain->signal_invmap[sig]
		: sig;

	err |= __put_user(&frame->info, &frame->pinfo);
	err |= __put_user(&frame->uc, &frame->puc);
	err |= copy_siginfo_to_user(&frame->info, info);

	/* Create the ucontext.  */
	err |= __put_user(0, &frame->uc.uc_flags);
	err |= __put_user(0, &frame->uc.uc_link);
	err |= __put_user((void *)current->sas_ss_sp,
			  &frame->uc.uc_stack.ss_sp);
	err |= __put_user(sas_ss_flags(regs->regs[15]),
			  &frame->uc.uc_stack.ss_flags);
	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
	err |= setup_sigcontext(&frame->uc.uc_mcontext,
			        regs, set->sig[0]);
	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));

	/* Set up to return from userspace.  If provided, use a stub
	   already in userspace.  */
	if (ka->sa.sa_flags & SA_RESTORER) {
		regs->pr = (unsigned long) ka->sa.sa_restorer;
	} else {
		/* This is : mov  #__NR_rt_sigreturn,r3 ; trapa #0x10 */
#ifdef __LITTLE_ENDIAN__
		unsigned long code = 0xc310e300 | (__NR_rt_sigreturn);
#else
		unsigned long code = 0xe300c310 | (__NR_rt_sigreturn << 16);
#endif

		regs->pr = (unsigned long) frame->retcode;
		err |= __put_user(code, (long *)(frame->retcode+0));
	}

	if (err)
		goto give_sigsegv;

	/* Set up registers for signal handler */
	regs->regs[15] = (unsigned long) frame;
	regs->regs[4] = signal; /* Arg for signal handler */
	regs->pc = (unsigned long) ka->sa.sa_handler;

	set_fs(USER_DS);

#if DEBUG_SIG
	printk("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
		current->comm, current->pid, frame, regs->pc, regs->pr);
#endif

	flush_icache_range(regs->pr, regs->pr+4);
	return;

give_sigsegv:
	if (sig == SIGSEGV)
		ka->sa.sa_handler = SIG_DFL;
	force_sig(SIGSEGV, current);
}

/*
 * OK, we're invoking a handler
 */	

static void
handle_signal(unsigned long sig, struct k_sigaction *ka,
	      siginfo_t *info, sigset_t *oldset, struct pt_regs * regs)
{
	/* Are we from a system call? */
	if (regs->syscall_nr >= 0) {
		/* If so, check system call restarting.. */
		switch (regs->regs[0]) {
			case -ERESTARTNOHAND:
				regs->regs[0] = -EINTR;
				break;

			case -ERESTARTSYS:
				if (!(ka->sa.sa_flags & SA_RESTART)) {
					regs->regs[0] = -EINTR;
					break;
				}
			/* fallthrough */
			case -ERESTARTNOINTR:
				regs->regs[0] = regs->syscall_nr;
				regs->pc -= 2;
		}
	}

	/* Set up the stack frame */
	if (ka->sa.sa_flags & SA_SIGINFO)
		setup_rt_frame(sig, ka, info, oldset, regs);
	else
		setup_frame(sig, ka, oldset, regs);

	if (ka->sa.sa_flags & SA_ONESHOT)
		ka->sa.sa_handler = SIG_DFL;

	if (!(ka->sa.sa_flags & SA_NODEFER)) {
		spin_lock_irq(&current->sigmask_lock);
		sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
		sigaddset(&current->blocked,sig);
		recalc_sigpending(current);
		spin_unlock_irq(&current->sigmask_lock);
	}
}

/*
 * Note that 'init' is a special process: it doesn't get signals it doesn't
 * want to handle. Thus you cannot kill init even with a SIGKILL even by
 * mistake.
 *
 * Note that we go through the signals twice: once to check the signals that
 * the kernel can handle, and then we build all the user-level signal handling
 * stack-frames in one go after that.
 */
int do_signal(struct pt_regs *regs, sigset_t *oldset)
{
	siginfo_t info;
	struct k_sigaction *ka;

	/*
	 * We want the common case to go fast, which
	 * is why we may in certain cases get here from
	 * kernel mode. Just return without doing anything
	 * if so.
	 */
	if (!user_mode(regs))
		return 1;

	if (!oldset)
		oldset = &current->blocked;

	for (;;) {
		unsigned long signr;

		spin_lock_irq(&current->sigmask_lock);
		signr = dequeue_signal(&current->blocked, &info);
		spin_unlock_irq(&current->sigmask_lock);

		if (!signr)
			break;

		if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) {
			/* Let the debugger run.  */
			current->exit_code = signr;
			current->state = TASK_STOPPED;
			notify_parent(current, SIGCHLD);
			schedule();

			/* We're back.  Did the debugger cancel the sig?  */
			if (!(signr = current->exit_code))
				continue;
			current->exit_code = 0;

			/* The debugger continued.  Ignore SIGSTOP.  */
			if (signr == SIGSTOP)
				continue;

			/* Update the siginfo structure.  Is this good?  */
			if (signr != info.si_signo) {
				info.si_signo = signr;
				info.si_errno = 0;
				info.si_code = SI_USER;
				info.si_pid = current->p_pptr->pid;
				info.si_uid = current->p_pptr->uid;
			}

			/* If the (new) signal is now blocked, requeue it.  */
			if (sigismember(&current->blocked, signr)) {
				send_sig_info(signr, &info, current);
				continue;
			}
		}

		ka = &current->sig->action[signr-1];
		if (ka->sa.sa_handler == SIG_IGN) {
			if (signr != SIGCHLD)
				continue;
			/* Check for SIGCHLD: it's special.  */
			while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0)
				/* nothing */;
			continue;
		}

		if (ka->sa.sa_handler == SIG_DFL) {
			int exit_code = signr;

			/* Init gets no signals it doesn't want.  */
			if (current->pid == 1)
				continue;

			switch (signr) {
			case SIGCONT: case SIGCHLD: case SIGWINCH:
				continue;

			case SIGTSTP: case SIGTTIN: case SIGTTOU:
				if (is_orphaned_pgrp(current->pgrp))
					continue;
				/* FALLTHRU */

			case SIGSTOP:
				current->state = TASK_STOPPED;
				current->exit_code = signr;
				if (!(current->p_pptr->sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP))
					notify_parent(current, SIGCHLD);
				schedule();
				continue;

			case SIGQUIT: case SIGILL: case SIGTRAP:
			case SIGABRT: case SIGFPE: case SIGSEGV:
			case SIGBUS: case SIGSYS: case SIGXCPU: case SIGXFSZ:
				if (do_coredump(signr, regs))
					exit_code |= 0x80;
				/* FALLTHRU */

			default:
				sigaddset(&current->pending.signal, signr);
				recalc_sigpending(current);
				current->flags |= PF_SIGNALED;
				do_exit(exit_code);
				/* NOTREACHED */
			}
		}

		/* Whee!  Actually deliver the signal.  */
		handle_signal(signr, ka, &info, oldset, regs);
		return 1;
	}

	/* Did we come from a system call? */
	if (regs->syscall_nr >= 0) {
		/* Restart the system call - no handlers present */
		if (regs->regs[0] == -ERESTARTNOHAND ||
		    regs->regs[0] == -ERESTARTSYS ||
		    regs->regs[0] == -ERESTARTNOINTR) {
			regs->regs[0] = regs->syscall_nr;
			regs->pc -= 2;
		}
	}
	return 0;
}