didispfn.h

转化为DIB位图再显示出来的dicom文件C++代码

    /** get minimum optical density value "Dmin".
     *  measured in optical density (OD).
     *
     ** @return current Dmin value or -1 if not set
     */
    inline double getMinDensityValue() const
    {
        return MinDensity;
    }

    /** set minimum optical density value "Dmin".
     *  measured in optical density (OD). applicable to printers only.
     *  typical value: 0.2
     *
     ** @param  value  Dmin value to be set (or < 0 to unset)
     *
     ** @return status, true if successful (1 = Dmin set, 2 = Dmin unset), false otherwise
     */
    virtual int setMinDensityValue(const double value);

    /** get maximum optical density value "Dmax".
     *  measured in optical density (OD).
     *
     ** @return current Dmax value or -1 if not set
     */
    inline double getMaxDensityValue() const
    {
        return MaxDensity;
    }

    /** set maximum optical density value "Dmax".
     *  measured in optical density (OD). applicable to printers only.
     *  typical value: 3.0
     *
     ** @param  value  Dmax value to be set (or < 0 to unset)
     *
     ** @return status, true if successful (1 = Dmax set, 2 = Dmax unset), false otherwise
     */
    virtual int setMaxDensityValue(const double value);

    /** get minimum luminance value "Lmin".
     *  measured in cd/m^2. value is computed from "Dmax".
     *
     ** @return current Lmin value or -1 if Dmax not set
     */
    double getMinLuminanceValue() const;

    /** get maximum luminance value "Lmax".
     *  measured in cd/m^2. value is computed from "Dmin".
     *
     ** @return current Lmax value or -1 if Dmin not set
     */
    double getMaxLuminanceValue() const;

    /** get order of the polynomial curve fitting algorithm.
     *  used to interpolate the given base points.
     *
     ** @return polynomial order (0 = use cubic spline interpolation, -1 = not specified)
     */
    inline signed int getPolynomialOrder() const
    {
        return Order;
    }

    /** convert the given OD value to luminance.
     *  This function uses the currently set ambient light and illumination values.
     *
     ** @param  value   optical density value to be converted (>= 0)
     *  @param  useAmb  use ambient light value if OFTrue
     *
     ** @return luminance value if successful, -1 otherwise
     */
    double convertODtoLum(const double value,
                          const OFBool useAmb = OFTrue) const;

    /** convert the given OD value to luminance.
     *  This function uses the specified ambient light and illumination values.
     *
     ** @param  value    optical density value to be converted (>= 0)
     *  @param  ambient  ambient light value used for the conversion (>= 0)
     *  @param  illum    illumination value used for the conversion (>= 0)
     *
     ** @return luminance value if successful, -1 otherwise
     */
    static double convertODtoLum(const double value,
                                 const double ambient,
                                 const double illum);


 protected:

    /** create display LUT with specified number of entries (abstract method)
     *
     ** @param  count  number of LUT entries
     *
     ** @return pointer to created LUT if successful, NULL otherwise
     */
    virtual DiDisplayLUT *getDisplayLUT(unsigned long count) = 0;

    /** read the given device characteristics file
     *
     ** @param  filename  name of the characteristics file
     *
     ** @return status, true if successful, false otherwise
     */
    int readConfigFile(const char *filename);

    /** create a sorted (by DDL) table from the given DDL and luminance/OD tables
     *
     ** @param  ddl_tab  pointer to array with DDL values
     *  @param  val_tab  pointer to array with luminance/OD values
     *
     ** @return status, true if successful, false otherwise
     */
    int createSortedTable(const Uint16 *ddl_tab,
                          const double *val_tab);

    /** create a table with luminance values from the given OD table.
     *  Uses the currently set ambient light and illumination value.  The resulting luminance
     *  table has to be deleted by the caller.
     *
     ** @param  od_tab  pointer to array with optical density values
     *  @param  count   number of entries in the array
     *  @param  useAmb  use ambient light value if OFTrue
     *
     ** @return pointer to luminance table if successful, NULL otherwise
     */
    double *convertODtoLumTable(const double *od_tab,
                                const unsigned long count,
                                const OFBool useAmb);

    /** interpolate device characteristic curve by means of a cubic spline interpolation
     */
    int interpolateValues();

    /** calculate minimum and maximum luminance/OD values
     *
     ** @return status, true if successful, false otherwise
     */
    int calculateMinMax();

    /** check whether Dmin and Dmax are properly specified.
     *  report a warning message if "Dmin >= Dmax".
     *
     ** @return status, true if successful, false otherwise
     */
    int checkMinMaxDensity() const;

    /// status flag, indicating whether display function is valid
    int Valid;

    /// output device type (monitor, camera, printer or scanner)
    const E_DeviceType DeviceType;

    /// number of DDL and luminance/OD values
    unsigned long ValueCount;
    /// maximum DDL value (usually 255)
    Uint16 MaxDDLValue;
    /// order of the polynomial curve fitting algorithm
    signed int Order;

    /// (reflected) ambient light value
    double AmbientLight;
    /// illumination value
    double Illumination;

    /// minimum optical density (-1 if unset)
    double MinDensity;
    /// maximum optical density (-1 if unset)
    double MaxDensity;

    /// pointer to array of DDL values
    Uint16 *DDLValue;
    /// pointer to array of corresponding luminance/OD values
    double *LODValue;

    /// minimum luminance/OD value
    double MinValue;
    /// maximum luminance/OD value
    double MaxValue;

    /// constant defining minimum value for number of bits for LUT input (here: 8)
    static const int MinBits;
    /// constant defining maximum value for number of bits for LUT input (here: 16)
    static const int MaxBits;

    /// array with pointer to the different lookup tables (here: 8-16 bits)
    DiDisplayLUT *LookupTable[MAX_NUMBER_OF_TABLES];


 private:

 // --- declarations to avoid compiler warnings

    DiDisplayFunction(const DiDisplayFunction &);
    DiDisplayFunction &operator=(const DiDisplayFunction &);
};


#endif


/*
 *
 * CVS/RCS Log:
 * $Log: didispfn.h,v $
 * Revision 1.23  2005/12/08 16:47:37  meichel
 * Changed include path schema for all DCMTK header files
 *
 * Revision 1.22  2003/12/08 18:18:35  joergr
 * Removed leading underscore characters from preprocessor symbols (reserved
 * symbols). Updated CVS header.
 *
 * Revision 1.21  2003/03/12 14:56:14  joergr
 * Removed default value from parameter "useAmb" in method convertODtoLumTable.
 *
 * Revision 1.20  2003/02/12 11:35:16  joergr
 * Added Dmin/max support to CIELAB calibration routines.
 *
 * Revision 1.19  2003/02/11 16:32:02  joergr
 * Added two new functions to determine the luminance/OD value of a particular
 * DDL according to the device's characteristic curve and vice versa.
 *
 * Revision 1.18  2003/02/11 10:01:14  joergr
 * Added support for Dmin/max to calibration routines (required for printers).
 *
 * Revision 1.17  2002/07/19 08:24:21  joergr
 * Enhanced/corrected comments.
 *
 * Revision 1.16  2002/07/18 12:29:08  joergr
 * Added support for hardcopy and softcopy input devices (camera and scanner).
 * Added polygonal curve fitting algorithm as an alternate interpolation
 * method.
 *
 * Revision 1.15  2002/07/03 13:50:24  joergr
 * Fixed inconsistencies regarding the handling of ambient light.
 *
 * Revision 1.14  2002/07/02 16:23:42  joergr
 * Added support for hardcopy devices to the calibrated output routines.
 *
 * Revision 1.13  2001/06/01 15:49:40  meichel
 * Updated copyright header
 *
 * Revision 1.12  2000/03/08 16:24:15  meichel
 * Updated copyright header.
 *
 * Revision 1.11  2000/03/06 18:19:35  joergr
 * Moved get-method to base class, renamed method and made method virtual to
 * avoid hiding of methods (reported by Sun CC 4.2).
 *
 * Revision 1.10  1999/10/18 15:05:51  joergr
 * Enhanced command line tool dcmdspfn (added new options).
 *
 * Revision 1.9  1999/10/18 10:15:50  joergr
 * Moved min/max value determination to display function base class. Now the
 * actual min/max values are also used for GSDFunction (instead of first and
 * last luminance value).
 *
 * Revision 1.8  1999/09/17 12:08:24  joergr
 * Added/changed/completed DOC++ style comments in the header files.
 *
 * Revision 1.7  1999/09/10 08:45:18  joergr
 * Added support for CIELAB display function.
 *
 * Revision 1.6  1999/03/24 17:19:20  joergr
 * Added/Modified comments and formatting.
 * Added support for Barten transformation from 2 to 7 bits input (now: 2-16).
 *
 * Revision 1.5  1999/03/03 11:47:42  joergr
 * Added support to specify ambient light value (re: Barten transformation).
 *
 * Revision 1.4  1999/02/23 16:55:32  joergr
 * Added tool to export display curves to a text file.
 *
 * Revision 1.3  1999/02/11 15:44:22  joergr
 * Removed unused parameter / member variable.
 *
 * Revision 1.2  1999/02/05 16:43:12  joergr
 * Added optional parameter to method convertPValueToDDL to specify width
 * of output data (number of bits).
 *
 * Revision 1.1  1999/02/03 17:46:37  joergr
 * Added support for calibration according to Barten transformation (incl.
 * a DISPLAY file describing the monitor characteristic).
 *
 *
 */