p80211ioctl.h

对于无线网卡采用prism芯片的linux的开源驱动.

/* src/include/wlan/p80211ioctl.h
*
* Declares constants and types for the p80211 ioctls
*
* Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
* --------------------------------------------------------------------
*
* linux-wlan
*
*   The contents of this file are subject to the Mozilla Public
*   License Version 1.1 (the "License"); you may not use this file
*   except in compliance with the License. You may obtain a copy of
*   the License at http://www.mozilla.org/MPL/
*
*   Software distributed under the License is distributed on an "AS
*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
*   implied. See the License for the specific language governing
*   rights and limitations under the License.
*
*   Alternatively, the contents of this file may be used under the
*   terms of the GNU Public License version 2 (the "GPL"), in which
*   case the provisions of the GPL are applicable instead of the
*   above.  If you wish to allow the use of your version of this file
*   only under the terms of the GPL and not to allow others to use
*   your version of this file under the MPL, indicate your decision
*   by deleting the provisions above and replace them with the notice
*   and other provisions required by the GPL.  If you do not delete
*   the provisions above, a recipient may use your version of this
*   file under either the MPL or the GPL.
*
* --------------------------------------------------------------------
*
* Inquiries regarding the linux-wlan Open Source project can be
* made directly to:
*
* AbsoluteValue Systems Inc.
* [e-mail]
* http://www.linux-wlan.com
*
* --------------------------------------------------------------------
*
* Portions of the development of this software were funded by 
* Intersil Corporation as part of PRISM(R) chipset product development.
*
* --------------------------------------------------------------------
*
*  While this file is called 'ioctl' is purpose goes a little beyond
*  that.  This file defines the types and contants used to implement
*  the p80211 request/confirm/indicate interfaces on Linux.  The
*  request/confirm interface is, in fact, normally implemented as an
*  ioctl.  The indicate interface on the other hand, is implemented
*  using the Linux 'netlink' interface.
*
*  The reason I say that request/confirm is 'normally' implemented 
*  via ioctl is that we're reserving the right to be able to send 
*  request commands via the netlink interface.  This will be necessary
*  if we ever need to send request messages when there aren't any
*  wlan network devices present (i.e. sending a message that only p80211
*  cares about.
* --------------------------------------------------------------------
*/


#ifndef _P80211IOCTL_H
#define _P80211IOCTL_H

/*================================================================*/
/* Constants */

/*----------------------------------------------------------------*/
/* p80211 ioctl "request" codes.  See argument 2 of ioctl(2). */

#define P80211_IFTEST		(SIOCDEVPRIVATE + 0)
#define P80211_IFREQ		(SIOCDEVPRIVATE + 1)

/*----------------------------------------------------------------*/
/* Magic number, a quick test to see we're getting the desired struct */

#define P80211_IOCTL_MAGIC	(0x4a2d464dUL)

/*----------------------------------------------------------------*/
/* Netlink protocol numbers for the indication interface */

#define P80211_NL_SOCK_IND	NETLINK_USERSOCK

/*----------------------------------------------------------------*/
/* Netlink multicast bits for different types of messages */

#define P80211_NL_MCAST_GRP_MLME	BIT0	/* Local station messages */
#define P80211_NL_MCAST_GRP_SNIFF	BIT1	/* Sniffer messages */
#define P80211_NL_MCAST_GRP_DIST	BIT2	/* Distribution system messages */

/*================================================================*/
/* Macros */


/*================================================================*/
/* Types */

/*----------------------------------------------------------------*/
/* A ptr to the following structure type is passed as the third */
/*  argument to the ioctl system call when issuing a request to */
/*  the p80211 module. */

typedef struct p80211ioctl_req
{
	char 	name[WLAN_DEVNAMELEN_MAX];
	caddr_t data;
	UINT32	magic;
	UINT16	len;
	UINT32	result;
} __WLAN_ATTRIB_PACK__ p80211ioctl_req_t;


/*================================================================*/
/* Extern Declarations */


/*================================================================*/
/* Function Declarations */


#endif /* _P80211IOCTL_H */