shell.c

sqlite 3.3.8 支持加密的版本

    }else{
      int i;
      for(i=1; i<nArg; i++){
        zShellStatic = azArg[i];
        run_schema_dump_query(p,
          "SELECT name, type, sql FROM sqlite_master "
          "WHERE tbl_name LIKE shellstatic() AND type=='table'"
          "  AND rootpage!=0 AND sql NOT NULL", 0);
        run_schema_dump_query(p,
          "SELECT name, type, sql FROM sqlite_master "
          "WHERE tbl_name LIKE shellstatic() AND type!='table'"
          "  AND type!='meta' AND sql NOT NULL", 0);
        run_table_dump_query(p->out, p->db,
          "SELECT sql FROM sqlite_master "
          "WHERE sql NOT NULL AND rootpage==0 AND type='table'"
          "  AND tbl_name LIKE shellstatic()"
        );
        zShellStatic = 0;
      }
    }
    if( zErrMsg ){
      fprintf(stderr,"Error: %s\n", zErrMsg);
      sqlite3_free(zErrMsg);
    }else{
      fprintf(p->out, "COMMIT;\n");
    }
  }else

  if( c=='e' && strncmp(azArg[0], "echo", n)==0 && nArg>1 ){
    int j;
    char *z = azArg[1];
    int val = atoi(azArg[1]);
    for(j=0; z[j]; j++){
      z[j] = tolower((unsigned char)z[j]);
    }
    if( strcmp(z,"on")==0 ){
      val = 1;
    }else if( strcmp(z,"yes")==0 ){
      val = 1;
    }
    p->echoOn = val;
  }else

  if( c=='e' && strncmp(azArg[0], "exit", n)==0 ){
    rc = 1;
  }else

  if( c=='e' && strncmp(azArg[0], "explain", n)==0 ){
    int j;
    static char zOne[] = "1";
    char *z = nArg>=2 ? azArg[1] : zOne;
    int val = atoi(z);
    for(j=0; z[j]; j++){
      z[j] = tolower((unsigned char)z[j]);
    }
    if( strcmp(z,"on")==0 ){
      val = 1;
    }else if( strcmp(z,"yes")==0 ){
      val = 1;
    }
    if(val == 1) {
      if(!p->explainPrev.valid) {
        p->explainPrev.valid = 1;
        p->explainPrev.mode = p->mode;
        p->explainPrev.showHeader = p->showHeader;
        memcpy(p->explainPrev.colWidth,p->colWidth,sizeof(p->colWidth));
      }
      /* We could put this code under the !p->explainValid
      ** condition so that it does not execute if we are already in
      ** explain mode. However, always executing it allows us an easy
      ** was to reset to explain mode in case the user previously
      ** did an .explain followed by a .width, .mode or .header
      ** command.
      */
      p->mode = MODE_Column;
      p->showHeader = 1;
      memset(p->colWidth,0,ArraySize(p->colWidth));
      p->colWidth[0] = 4;
      p->colWidth[1] = 14;
      p->colWidth[2] = 10;
      p->colWidth[3] = 10;
      p->colWidth[4] = 33;
    }else if (p->explainPrev.valid) {
      p->explainPrev.valid = 0;
      p->mode = p->explainPrev.mode;
      p->showHeader = p->explainPrev.showHeader;
      memcpy(p->colWidth,p->explainPrev.colWidth,sizeof(p->colWidth));
    }
  }else

  if( c=='h' && (strncmp(azArg[0], "header", n)==0
                 ||
                 strncmp(azArg[0], "headers", n)==0 )&& nArg>1 ){
    int j;
    char *z = azArg[1];
    int val = atoi(azArg[1]);
    for(j=0; z[j]; j++){
      z[j] = tolower((unsigned char)z[j]);
    }
    if( strcmp(z,"on")==0 ){
      val = 1;
    }else if( strcmp(z,"yes")==0 ){
      val = 1;
    }
    p->showHeader = val;
  }else

  if( c=='h' && strncmp(azArg[0], "help", n)==0 ){
    fprintf(stderr,zHelp);
  }else

  if( c=='i' && strncmp(azArg[0], "import", n)==0 && nArg>=3 ){
    char *zTable = azArg[2];    /* Insert data into this table */
    char *zFile = azArg[1];     /* The file from which to extract data */
    sqlite3_stmt *pStmt;        /* A statement */
    int rc;                     /* Result code */
    int nCol;                   /* Number of columns in the table */
    int nByte;                  /* Number of bytes in an SQL string */
    int i, j;                   /* Loop counters */
    int nSep;                   /* Number of bytes in p->separator[] */
    char *zSql;                 /* An SQL statement */
    char *zLine;                /* A single line of input from the file */
    char **azCol;               /* zLine[] broken up into columns */
    char *zCommit;              /* How to commit changes */   
    FILE *in;                   /* The input file */
    int lineno = 0;             /* Line number of input file */

    open_db(p);
    nSep = strlen(p->separator);
    if( nSep==0 ){
      fprintf(stderr, "non-null separator required for import\n");
      return 0;
    }
    zSql = sqlite3_mprintf("SELECT * FROM '%q'", zTable);
    if( zSql==0 ) return 0;
    nByte = strlen(zSql);
    rc = sqlite3_prepare(p->db, zSql, -1, &pStmt, 0);
    sqlite3_free(zSql);
    if( rc ){
      fprintf(stderr,"Error: %s\n", sqlite3_errmsg(db));
      nCol = 0;
    }else{
      nCol = sqlite3_column_count(pStmt);
    }
    sqlite3_finalize(pStmt);
    if( nCol==0 ) return 0;
    zSql = malloc( nByte + 20 + nCol*2 );
    if( zSql==0 ) return 0;
    sqlite3_snprintf(nByte+20, zSql, "INSERT INTO '%q' VALUES(?", zTable);
    j = strlen(zSql);
    for(i=1; i<nCol; i++){
      zSql[j++] = ',';
      zSql[j++] = '?';
    }
    zSql[j++] = ')';
    zSql[j] = 0;
    rc = sqlite3_prepare(p->db, zSql, -1, &pStmt, 0);
    free(zSql);
    if( rc ){
      fprintf(stderr, "Error: %s\n", sqlite3_errmsg(db));
      sqlite3_finalize(pStmt);
      return 0;
    }
    in = fopen(zFile, "rb");
    if( in==0 ){
      fprintf(stderr, "cannot open file: %s\n", zFile);
      sqlite3_finalize(pStmt);
      return 0;
    }
    azCol = malloc( sizeof(azCol[0])*(nCol+1) );
    if( azCol==0 ){
      fclose(in);
      return 0;
    }
    sqlite3_exec(p->db, "BEGIN", 0, 0, 0);
    zCommit = "COMMIT";
    while( (zLine = local_getline(0, in))!=0 ){
      char *z;
      i = 0;
      lineno++;
      azCol[0] = zLine;
      for(i=0, z=zLine; *z && *z!='\n' && *z!='\r'; z++){
        if( *z==p->separator[0] && strncmp(z, p->separator, nSep)==0 ){
          *z = 0;
          i++;
          if( i<nCol ){
            azCol[i] = &z[nSep];
            z += nSep-1;
          }
        }
      }
      *z = 0;
      if( i+1!=nCol ){
        fprintf(stderr,"%s line %d: expected %d columns of data but found %d\n",
           zFile, lineno, nCol, i+1);
        zCommit = "ROLLBACK";
        break;
      }
      for(i=0; i<nCol; i++){
        sqlite3_bind_text(pStmt, i+1, azCol[i], -1, SQLITE_STATIC);
      }
      sqlite3_step(pStmt);
      rc = sqlite3_reset(pStmt);
      free(zLine);
      if( rc!=SQLITE_OK ){
        fprintf(stderr,"Error: %s\n", sqlite3_errmsg(db));
        zCommit = "ROLLBACK";
        break;
      }
    }
    free(azCol);
    fclose(in);
    sqlite3_finalize(pStmt);
    sqlite3_exec(p->db, zCommit, 0, 0, 0);
  }else

  if( c=='i' && strncmp(azArg[0], "indices", n)==0 && nArg>1 ){
    struct callback_data data;
    char *zErrMsg = 0;
    open_db(p);
    memcpy(&data, p, sizeof(data));
    data.showHeader = 0;
    data.mode = MODE_List;
    zShellStatic = azArg[1];
    sqlite3_exec(p->db,
      "SELECT name FROM sqlite_master "
      "WHERE type='index' AND tbl_name LIKE shellstatic() "
      "UNION ALL "
      "SELECT name FROM sqlite_temp_master "
      "WHERE type='index' AND tbl_name LIKE shellstatic() "
      "ORDER BY 1",
      callback, &data, &zErrMsg
    );
    zShellStatic = 0;
    if( zErrMsg ){
      fprintf(stderr,"Error: %s\n", zErrMsg);
      sqlite3_free(zErrMsg);
    }
  }else

#ifndef SQLITE_OMIT_LOAD_EXTENSION
  if( c=='l' && strncmp(azArg[0], "load", n)==0 && nArg>=2 ){
    const char *zFile, *zProc;
    char *zErrMsg = 0;
    int rc;
    zFile = azArg[1];
    zProc = nArg>=3 ? azArg[2] : 0;
    open_db(p);
    rc = sqlite3_load_extension(p->db, zFile, zProc, &zErrMsg);
    if( rc!=SQLITE_OK ){
      fprintf(stderr, "%s\n", zErrMsg);
      sqlite3_free(zErrMsg);
    }
  }else
#endif

  if( c=='m' && strncmp(azArg[0], "mode", n)==0 && nArg>=2 ){
    int n2 = strlen(azArg[1]);
    if( strncmp(azArg[1],"line",n2)==0
        ||
        strncmp(azArg[1],"lines",n2)==0 ){
      p->mode = MODE_Line;
    }else if( strncmp(azArg[1],"column",n2)==0
              ||
              strncmp(azArg[1],"columns",n2)==0 ){
      p->mode = MODE_Column;
    }else if( strncmp(azArg[1],"list",n2)==0 ){
      p->mode = MODE_List;
    }else if( strncmp(azArg[1],"html",n2)==0 ){
      p->mode = MODE_Html;
    }else if( strncmp(azArg[1],"tcl",n2)==0 ){
      p->mode = MODE_Tcl;
    }else if( strncmp(azArg[1],"csv",n2)==0 ){
      p->mode = MODE_Csv;
      strcpy(p->separator, ",");
    }else if( strncmp(azArg[1],"tabs",n2)==0 ){
      p->mode = MODE_List;
      strcpy(p->separator, "\t");
    }else if( strncmp(azArg[1],"insert",n2)==0 ){
      p->mode = MODE_Insert;
      if( nArg>=3 ){
        set_table_name(p, azArg[2]);
      }else{
        set_table_name(p, "table");
      }
    }else {
      fprintf(stderr,"mode should be on of: "
         "column csv html insert line list tabs tcl\n");
    }
  }else

  if( c=='n' && strncmp(azArg[0], "nullvalue", n)==0 && nArg==2 ) {
    sprintf(p->nullvalue, "%.*s", (int)ArraySize(p->nullvalue)-1, azArg[1]);
  }else

  if( c=='o' && strncmp(azArg[0], "output", n)==0 && nArg==2 ){
    if( p->out!=stdout ){
      fclose(p->out);
    }
    if( strcmp(azArg[1],"stdout")==0 ){
      p->out = stdout;
      strcpy(p->outfile,"stdout");
    }else{
      p->out = fopen(azArg[1], "wb");
      if( p->out==0 ){
        fprintf(stderr,"can't write to \"%s\"\n", azArg[1]);
        p->out = stdout;
      } else {
         strcpy(p->outfile,azArg[1]);
      }
    }
  }else

  if( c=='p' && strncmp(azArg[0], "prompt", n)==0 && (nArg==2 || nArg==3)){
    if( nArg >= 2) {
      strncpy(mainPrompt,azArg[1],(int)ArraySize(mainPrompt)-1);
    }
    if( nArg >= 3) {
      strncpy(continuePrompt,azArg[2],(int)ArraySize(continuePrompt)-1);
    }
  }else

  if( c=='q' && strncmp(azArg[0], "quit", n)==0 ){
    rc = 1;
  }else

  if( c=='r' && strncmp(azArg[0], "read", n)==0 && nArg==2 ){
    FILE *alt = fopen(azArg[1], "rb");
    if( alt==0 ){
      fprintf(stderr,"can't open \"%s\"\n", azArg[1]);
    }else{
      process_input(p, alt);
      fclose(alt);
    }
  }else

  if( c=='s' && strncmp(azArg[0], "schema", n)==0 ){
    struct callback_data data;
    char *zErrMsg = 0;
    open_db(p);
    memcpy(&data, p, sizeof(data));
    data.showHeader = 0;
    data.mode = MODE_Semi;
    if( nArg>1 ){
      int i;
      for(i=0; azArg[1][i]; i++) azArg[1][i] = tolower(azArg[1][i]);
      if( strcmp(azArg[1],"sqlite_master")==0 ){
        char *new_argv[2], *new_colv[2];
        new_argv[0] = "CREATE TABLE sqlite_master (\n"
                      "  type text,\n"
                      "  name text,\n"
                      "  tbl_name text,\n"
                      "  rootpage integer,\n"
                      "  sql text\n"
                      ")";
        new_argv[1] = 0;
        new_colv[0] = "sql";
        new_colv[1] = 0;
        callback(&data, 1, new_argv, new_colv);
      }else if( strcmp(azArg[1],"sqlite_temp_master")==0 ){
        char *new_argv[2], *new_colv[2];
        new_argv[0] = "CREATE TEMP TABLE sqlite_temp_master (\n"
                      "  type text,\n"
                      "  name text,\n"
                      "  tbl_name text,\n"
                      "  rootpage integer,\n"
                      "  sql text\n"
                      ")";
        new_argv[1] = 0;
        new_colv[0] = "sql";
        new_colv[1] = 0;
        callback(&data, 1, new_argv, new_colv);
      }else{
        zShellStatic = azArg[1];
        sqlite3_exec(p->db,
          "SELECT sql FROM "
          "  (SELECT * FROM sqlite_master UNION ALL"
          "   SELECT * FROM sqlite_temp_master) "
          "WHERE tbl_name LIKE shellstatic() AND type!='meta' AND sql NOTNULL "
          "ORDER BY substr(type,2,1), name",
          callback, &data, &zErrMsg);
        zShellStatic = 0;
      }
    }else{
      sqlite3_exec(p->db,
         "SELECT sql FROM "
         "  (SELECT * FROM sqlite_master UNION ALL"
         "   SELECT * FROM sqlite_temp_master) "
         "WHERE type!='meta' AND sql NOTNULL AND name NOT LIKE 'sqlite_%'"
         "ORDER BY substr(type,2,1), name",
         callback, &data, &zErrMsg
      );
    }
    if( zErrMsg ){
      fprintf(stderr,"Error: %s\n", zErrMsg);
      sqlite3_free(zErrMsg);
    }
  }else

  if( c=='s' && strncmp(azArg[0], "separator", n)==0 && nArg==2 ){
    sprintf(p->separator, "%.*s", (int)ArraySize(p->separator)-1, azArg[1]);
  }else

  if( c=='s' && strncmp(azArg[0], "show", n)==0){
    int i;
    fprintf(p->out,"%9.9s: %s\n","echo", p->echoOn ? "on" : "off");
    fprintf(p->out,"%9.9s: %s\n","explain", p->explainPrev.valid ? "on" :"off");
    fprintf(p->out,"%9.9s: %s\n","headers", p->showHeader ? "on" : "off");
    fprintf(p->out,"%9.9s: %s\n","mode", modeDescr[p->mode]);
    fprintf(p->out,"%9.9s: ", "nullvalue");
      output_c_string(p->out, p->nullvalue);
      fprintf(p->out, "\n");
    fprintf(p->out,"%9.9s: %s\n","output",
                                 strlen(p->outfile) ? p->outfile : "stdout");
    fprintf(p->out,"%9.9s: ", "separator");
      output_c_string(p->out, p->separator);
      fprintf(p->out, "\n");
    fprintf(p->out,"%9.9s: ","width");
    for (i=0;i<(int)ArraySize(p->colWidth) && p->colWidth[i] != 0;i++) {
      fprintf(p->out,"%d ",p->colWidth[i]);
    }
    fprintf(p->out,"\n");
  }else

  if( c=='t' && n>1 && strncmp(azArg[0], "tables", n)==0 ){
    char **azResult;
    int nRow, rc;
    char *zErrMsg;
    open_db(p);
    if( nArg==1 ){
      rc = sqlite3_get_table(p->db,
        "SELECT name FROM sqlite_master "
        "WHERE type IN ('table','view') AND name NOT LIKE 'sqlite_%'"
        "UNION ALL "
        "SELECT name FROM sqlite_temp_master "
        "WHERE type IN ('table','view') "
        "ORDER BY 1",
        &azResult, &nRow, 0, &zErrMsg
      );
    }else{
      zShellStatic = azArg[1];
      rc = sqlite3_get_table(p->db,
        "SELECT name FROM sqlite_master "
        "WHERE type IN ('table','view') AND name LIKE '%'||shellstatic()||'%' "
        "UNION ALL "
        "SELECT name FROM sqlite_temp_master "
        "WHERE type IN ('table','view') AND name LIKE '%'||shellstatic()||'%' "
        "ORDER BY 1",
        &azResult, &nRow, 0, &zErrMsg
      );
      zShellStatic = 0;
    }
    if( zErrMsg ){
      fprintf(stderr,"Error: %s\n", zErrMsg);
      sqlite3_free(zErrMsg);
    }
    if( rc==SQLITE_OK ){
      int len, maxlen = 0;
      int i, j;
      int nPrintCol, nPrintRow;
      for(i=1; i<=nRow; i++){
        if( azResult[i]==0 ) continue;
        len = strlen(azResult[i]);
        if( len>maxlen ) maxlen = len;
      }