cnt4_din.fit

基于IR1150的单周期控制PFC的原理与设计 无信号源的自激式激磁电源的设计 基于dsPIC30F2010控制光伏水泵变频器的研究 陀螺供电电源设计

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 10/25/2006 15:25:55      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "cnt4_din"
BEGIN

    DEVICE = "EP1K10TC100-1";

    "clk"                          : INPUT_PIN  = 39     ;
    "din0"                         : INPUT_PIN  = 38     ;
    "din1"                         : INPUT_PIN  = 40     ;
    "din2"                         : INPUT_PIN  = 89     ;
    "din3"                         : INPUT_PIN  = 91     ;
    "q0"                           : OUTPUT_PIN = 61     ;
    "q1"                           : OUTPUT_PIN = 64     ;
    "q2"                           : OUTPUT_PIN = 62     ;
    "q3"                           : OUTPUT_PIN = 63     ;
    "|LPM_ADD_SUB:34|addcore:adder|pcarry1" : LOCATION   = LC1_B3 ;
    "|LPM_ADD_SUB:34|addcore:adder|pcarry2" : LOCATION   = LC3_B3 ;
    ":10"                          : LOCATION   = LC4_B3 ;  -- q13
    ":11"                          : LOCATION   = LC6_B3 ;  -- q12
    ":12"                          : LOCATION   = LC2_B3 ;  -- q11
    ":13"                          : LOCATION   = LC8_B3 ;  -- q10

END;

INTERNAL_INFO "cnt4_din"
BEGIN
	DEVICE = EP1K10TC100-1;
    OD5P39  : LORAX = "1:FB5->LC4_B3,->LC6_B3,->LC2_B3,->LC8_B3|";
    OD2P38  : LORAX = "1:FB2|2:FH2R1,PA6R1C2->LC1_B3,->LC2_B3,->LC8_B3||";
    OD3P40  : LORAX = "1:FB3|2:FH3R1,PA5R1C2->LC1_B3,->LC2_B3||";
    OD1P89  : LORAX = "1:FB1|2:FH1R1,PA20R1C2->LC3_B3,->LC6_B3||";
    OD0P91  : LORAX = "1:FB0|2:FH0R1,PA0R1C2->LC4_B3||";
    LC4_B3  : LORAX = "1:MSW3R1C3,HHL17R1->OH11R1P63|";
    LC6_B3  : LORAX = "1:MSW5R1C3,G78R1->OH13R1P62|";
    LC2_B3  : LORAX = "1:MSW1R1C2,G28R1->OH9R1P64|";
    LC8_B3  : LORAX = "1:MSW7R1C3,HHL27R1->OH15R1P61|";
	LC1_B3  : LORAX2 = "OD3P40, OD2P38, LC8_B3, LC2_B3";
	LC3_B3  : LORAX2 = "X, OD1P89, LC1_B3, LC6_B3";
	LC4_B3  : LORAX2 = "X, OD0P91, LC3_B3, LC4_B3";
	LC6_B3  : LORAX2 = "X, OD1P89, LC1_B3, LC6_B3";
	LC2_B3  : LORAX2 = "OD3P40, OD2P38, LC8_B3, LC2_B3";
	LC8_B3  : LORAX2 = "X, X, OD2P38, LC8_B3";
END;