cmdlex.cc

sdcc是为51等小型嵌入式cpu设计的c语言编译器支持数种不同类型的cpu

		/* Support of yytext. */
		*yy_cp = (yy_hold_char);

		/* yy_bp points to the position in yy_ch_buf of the start of
		 * the current run.
		 */
		yy_bp = yy_cp;

		yy_current_state = (yy_start);
yy_match:
		do
			{
			register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
			if ( yy_accept[yy_current_state] )
				{
				(yy_last_accepting_state) = yy_current_state;
				(yy_last_accepting_cpos) = yy_cp;
				}
			while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
				{
				yy_current_state = (int) yy_def[yy_current_state];
				if ( yy_current_state >= 27 )
					yy_c = yy_meta[(unsigned int) yy_c];
				}
			yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
			++yy_cp;
			}
		while ( yy_base[yy_current_state] != 36 );

yy_find_action:
		yy_act = yy_accept[yy_current_state];
		if ( yy_act == 0 )
			{ /* have to back up */
			yy_cp = (yy_last_accepting_cpos);
			yy_current_state = (yy_last_accepting_state);
			yy_act = yy_accept[yy_current_state];
			}

		YY_DO_BEFORE_ACTION;

do_action:	/* This label is used only to access EOF actions. */

		switch ( yy_act )
	{ /* beginning of action switch */
			case 0: /* must back up */
			/* undo the effects of YY_DO_BEFORE_ACTION */
			*yy_cp = (yy_hold_char);
			yy_cp = (yy_last_accepting_cpos);
			yy_current_state = (yy_last_accepting_state);
			goto yy_find_action;

case 1:
YY_RULE_SETUP
#line 16 "cmdlex.l"
;
	YY_BREAK
case 2:
YY_RULE_SETUP
#line 18 "cmdlex.l"
return(tok(PTOK_PLUS));
	YY_BREAK
case 3:
YY_RULE_SETUP
#line 19 "cmdlex.l"
return(tok(PTOK_MINUS));
	YY_BREAK
case 4:
YY_RULE_SETUP
#line 20 "cmdlex.l"
return(tok(PTOK_ASTERIX));
	YY_BREAK
case 5:
YY_RULE_SETUP
#line 21 "cmdlex.l"
return(tok(PTOK_SLASH));
	YY_BREAK
case 6:
YY_RULE_SETUP
#line 22 "cmdlex.l"
return(tok(PTOK_LEFT_PAREN));
	YY_BREAK
case 7:
YY_RULE_SETUP
#line 23 "cmdlex.l"
return(tok(PTOK_RIGHT_PAREN));
	YY_BREAK
case 8:
YY_RULE_SETUP
#line 24 "cmdlex.l"
return(tok(PTOK_LEFT_BRACKET));
	YY_BREAK
case 9:
YY_RULE_SETUP
#line 25 "cmdlex.l"
return(tok(PTOK_RIGHT_BRACKET));
	YY_BREAK
case 10:
YY_RULE_SETUP
#line 26 "cmdlex.l"
return(tok(PTOK_EQUAL));
	YY_BREAK
case 11:
YY_RULE_SETUP
#line 27 "cmdlex.l"
return(tok(PTOK_DOT));
	YY_BREAK
case 12:
YY_RULE_SETUP
#line 28 "cmdlex.l"
return(tok(PTOK_AMPERSAND));
	YY_BREAK
case 13:
YY_RULE_SETUP
#line 30 "cmdlex.l"
{
  yylval->number= strtol(yytext, 0, 0);
  return(YY_cl_ucsim_parser_CLASS::PTOK_NUMBER);
}
	YY_BREAK
case 14:
YY_RULE_SETUP
#line 35 "cmdlex.l"
return(lexer_obj->check_id(yytext));
	YY_BREAK
case 15:
YY_RULE_SETUP
#line 37 "cmdlex.l"
;
	YY_BREAK
case 16:
YY_RULE_SETUP
#line 39 "cmdlex.l"
ECHO;
	YY_BREAK
#line 690 "cmdlex.cc"
case YY_STATE_EOF(INITIAL):
	yyterminate();

	case YY_END_OF_BUFFER:
		{
		/* Amount of text matched not including the EOB char. */
		int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;

		/* Undo the effects of YY_DO_BEFORE_ACTION. */
		*yy_cp = (yy_hold_char);
		YY_RESTORE_YY_MORE_OFFSET

		if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
			{
			/* We're scanning a new file or input source.  It's
			 * possible that this happened because the user
			 * just pointed yyin at a new source and called
			 * yylex().  If so, then we have to assure
			 * consistency between YY_CURRENT_BUFFER and our
			 * globals.  Here is the right place to do so, because
			 * this is the first action (other than possibly a
			 * back-up) that will match for the new input source.
			 */
			(yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
			YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin;
			YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
			}

		/* Note that here we test for yy_c_buf_p "<=" to the position
		 * of the first EOB in the buffer, since yy_c_buf_p will
		 * already have been incremented past the NUL character
		 * (since all states make transitions on EOB to the
		 * end-of-buffer state).  Contrast this with the test
		 * in input().
		 */
		if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
			{ /* This was really a NUL. */
			yy_state_type yy_next_state;

			(yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;

			yy_current_state = yy_get_previous_state(  );

			/* Okay, we're now positioned to make the NUL
			 * transition.  We couldn't have
			 * yy_get_previous_state() go ahead and do it
			 * for us because it doesn't know how to deal
			 * with the possibility of jamming (and we don't
			 * want to build jamming into it because then it
			 * will run more slowly).
			 */

			yy_next_state = yy_try_NUL_trans( yy_current_state );

			yy_bp = (yytext_ptr) + YY_MORE_ADJ;

			if ( yy_next_state )
				{
				/* Consume the NUL. */
				yy_cp = ++(yy_c_buf_p);
				yy_current_state = yy_next_state;
				goto yy_match;
				}

			else
				{
				yy_cp = (yy_c_buf_p);
				goto yy_find_action;
				}
			}

		else switch ( yy_get_next_buffer(  ) )
			{
			case EOB_ACT_END_OF_FILE:
				{
				(yy_did_buffer_switch_on_eof) = 0;

				if ( yywrap(  ) )
					{
					/* Note: because we've taken care in
					 * yy_get_next_buffer() to have set up
					 * yytext, we can now set up
					 * yy_c_buf_p so that if some total
					 * hoser (like flex itself) wants to
					 * call the scanner after we return the
					 * YY_NULL, it'll still work - another
					 * YY_NULL will get returned.
					 */
					(yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;

					yy_act = YY_STATE_EOF(YY_START);
					goto do_action;
					}

				else
					{
					if ( ! (yy_did_buffer_switch_on_eof) )
						YY_NEW_FILE;
					}
				break;
				}

			case EOB_ACT_CONTINUE_SCAN:
				(yy_c_buf_p) =
					(yytext_ptr) + yy_amount_of_matched_text;

				yy_current_state = yy_get_previous_state(  );

				yy_cp = (yy_c_buf_p);
				yy_bp = (yytext_ptr) + YY_MORE_ADJ;
				goto yy_match;

			case EOB_ACT_LAST_MATCH:
				(yy_c_buf_p) =
				&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];

				yy_current_state = yy_get_previous_state(  );

				yy_cp = (yy_c_buf_p);
				yy_bp = (yytext_ptr) + YY_MORE_ADJ;
				goto yy_find_action;
			}
		break;
		}

	default:
		YY_FATAL_ERROR(
			"fatal flex scanner internal error--no action found" );
	} /* end of action switch */
		} /* end of scanning one token */
} /* end of yylex */

yyFlexLexer::yyFlexLexer( std::istream* arg_yyin, std::ostream* arg_yyout )
{
	yyin = arg_yyin;
	yyout = arg_yyout;
	yy_c_buf_p = 0;
	yy_init = 1;
	yy_start = 0;
	yy_flex_debug = 0;
	yylineno = 1;	// this will only get updated if %option yylineno

	yy_did_buffer_switch_on_eof = 0;

	yy_looking_for_trail_begin = 0;
	yy_more_flag = 0;
	yy_more_len = 0;
	yy_more_offset = yy_prev_more_offset = 0;

	yy_start_stack_ptr = yy_start_stack_depth = 0;
	yy_start_stack = 0;

    (yy_buffer_stack) = 0;
    (yy_buffer_stack_top) = 0;
    (yy_buffer_stack_max) = 0;

	yy_state_buf = 0;

}

yyFlexLexer::~yyFlexLexer()
{
	delete [] yy_state_buf;
	yyfree(yy_start_stack  );
	yy_delete_buffer( YY_CURRENT_BUFFER );
}

void yyFlexLexer::switch_streams( std::istream* new_in, std::ostream* new_out )
{
	if ( new_in )
		{
		yy_delete_buffer( YY_CURRENT_BUFFER );
		yy_switch_to_buffer( yy_create_buffer( new_in, YY_BUF_SIZE  ) );
		}

	if ( new_out )
		yyout = new_out;
}

#ifdef YY_INTERACTIVE
int yyFlexLexer::LexerInput( char* buf, int /* max_size */ )
#else
int yyFlexLexer::LexerInput( char* buf, int max_size )
#endif
{
	if ( yyin->eof() || yyin->fail() )
		return 0;

#ifdef YY_INTERACTIVE
	yyin->get( buf[0] );

	if ( yyin->eof() )
		return 0;

	if ( yyin->bad() )
		return -1;

	return 1;

#else
	(void) yyin->read( buf, max_size );

	if ( yyin->bad() )
		return -1;
	else
		return yyin->gcount();
#endif
}

void yyFlexLexer::LexerOutput( const char* buf, int size )
{
	(void) yyout->write( buf, size );
}

/* yy_get_next_buffer - try to read in a new buffer
 *
 * Returns a code representing an action:
 *	EOB_ACT_LAST_MATCH -
 *	EOB_ACT_CONTINUE_SCAN - continue scanning from current position
 *	EOB_ACT_END_OF_FILE - end of file
 */
int yyFlexLexer::yy_get_next_buffer()
{
    	register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
	register char *source = (yytext_ptr);
	register int number_to_move, i;
	int ret_val;

	if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
		YY_FATAL_ERROR(
		"fatal flex scanner internal error--end of buffer missed" );

	if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
		{ /* Don't try to fill the buffer, so this is an EOF. */
		if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
			{
			/* We matched a single character, the EOB, so
			 * treat this as a final EOF.
			 */
			return EOB_ACT_END_OF_FILE;
			}

		else
			{
			/* We matched some text prior to the EOB, first
			 * process it.
			 */
			return EOB_ACT_LAST_MATCH;
			}
		}

	/* Try to read more data. */

	/* First move last chars to start of buffer. */
	number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;

	for ( i = 0; i < number_to_move; ++i )
		*(dest++) = *(source++);

	if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
		/* don't do the read, it's not guaranteed to return an EOF,
		 * just force an EOF
		 */
		YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;

	else
		{
			size_t num_to_read =
			YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;

		while ( num_to_read <= 0 )
			{ /* Not enough room in the buffer - grow it. */

			/* just a shorter name for the current buffer */
			YY_BUFFER_STATE b = YY_CURRENT_BUFFER;

			int yy_c_buf_p_offset =
				(int) ((yy_c_buf_p) - b->yy_ch_buf);

			if ( b->yy_is_our_buffer )
				{
				int new_size = b->yy_buf_size * 2;

				if ( new_size <= 0 )
					b->yy_buf_size += b->yy_buf_size / 8;
				else
					b->yy_buf_size *= 2;

				b->yy_ch_buf = (char *)
					/* Include room in for 2 EOB chars. */
					yyrealloc((void *) b->yy_ch_buf,b->yy_buf_size + 2  );
				}
			else
				/* Can't grow it, we don't own it. */
				b->yy_ch_buf = 0;

			if ( ! b->yy_ch_buf )
				YY_FATAL_ERROR(
				"fatal error - scanner input buffer overflow" );

			(yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset];

			num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size -
						number_to_move - 1;

			}

		if ( num_to_read > YY_READ_BUF_SIZE )
			num_to_read = YY_READ_BUF_SIZE;

		/* Read in more data. */
		YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
			(yy_n_chars), num_to_read );

		YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
		}

	if ( (yy_n_chars) == 0 )
		{
		if ( number_to_move == YY_MORE_ADJ )
			{
			ret_val = EOB_ACT_END_OF_FILE;
			yyrestart( yyin  );
			}

		else
			{
			ret_val = EOB_ACT_LAST_MATCH;
			YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
				YY_BUFFER_EOF_PENDING;
			}
		}

	else
		ret_val = EOB_ACT_CONTINUE_SCAN;

	(yy_n_chars) += number_to_move;
	YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
	YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;

	(yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];

	return ret_val;
}

/* yy_get_previous_state - get the state just before the EOB char was reached */

    yy_state_type yyFlexLexer::yy_get_previous_state()
{
	register yy_state_type yy_current_state;
	register char *yy_cp;
    
	yy_current_state = (yy_start);

	for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
		{
		register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
		if ( yy_accept[yy_current_state] )
			{
			(yy_last_accepting_state) = yy_current_state;
			(yy_last_accepting_cpos) = yy_cp;
			}
		while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
			{
			yy_current_state = (int) yy_def[yy_current_state];
			if ( yy_current_state >= 27 )
				yy_c = yy_meta[(unsigned int) yy_c];
			}
		yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
		}

	return yy_current_state;
}

/* yy_try_NUL_trans - try to make a transition on the NUL character
 *
 * synopsis
 *	next_state = yy_try_NUL_trans( current_state );
 */
    yy_state_type yyFlexLexer::yy_try_NUL_trans( yy_state_type yy_current_state )
{
	register int yy_is_jam;
    	register char *yy_cp = (yy_c_buf_p);

	register YY_CHAR yy_c = 1;
	if ( yy_accept[yy_current_state] )
		{
		(yy_last_accepting_state) = yy_current_state;
		(yy_last_accepting_cpos) = yy_cp;
		}
	while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
		{
		yy_current_state = (int) yy_def[yy_current_state];
		if ( yy_current_state >= 27 )
			yy_c = yy_meta[(unsigned int) yy_c];
		}
	yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
	yy_is_jam = (yy_current_state == 26);

	return yy_is_jam ? 0 : yy_current_state;
}

    void yyFlexLexer::yyunput( int c, register char* yy_bp)
{
	register char *yy_cp;
    
    yy_cp = (yy_c_buf_p);

	/* undo effects of setting up yytext */
	*yy_cp = (yy_hold_char);

	if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
		{ /* need to shift things up to make room */
		/* +2 for EOB chars. */
		register int number_to_move = (yy_n_chars) + 2;
		register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[
					YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2];
		register char *source =
				&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move];