at89s53.h

sdcc是为51等小型嵌入式cpu设计的c语言编译器支持数种不同类型的cpu

/*-------------------------------------------------------------------------
   Register Declarations for the Atmel AT89S53 Processor

   Written By -  Jesus Calvino-Fraga / jesusc at ece.ubc.ca (March 2005)

   This library is free software; you can redistribute it and/or
   modify it under the terms of the GNU Lesser General Public
   License as published by the Free Software Foundation; either
   version 2.1 of the License, or (at your option) any later version.

   This library is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
   Lesser General Public License for more details.

   You should have received a copy of the GNU Lesser General Public
   License along with this library; if not, write to the Free Software
   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA

   In other words, you are welcome to use, share and improve this program.
   You are forbidden to forbid anyone else to use, share and improve
   what you give them.   Help stamp out software-hoarding!
-------------------------------------------------------------------------*/

#ifndef REG_AT89S53_H
#define REG_AT89S53_H

#include <8052.h>     /* load difinitions for the 8052 core */

#ifdef REG8052_H
#undef REG8052_H
#endif

/* define AT89S53 specific registers only */
sfr at 0x84 DP1L;	/* Data Pointer 1 Low Byte */
sfr at 0x85 DP1H ;	/* Data Pointer 1 High Byte */
sfr at 0x86 SPDR;	/* SPI Data Register */
sfr at 0xAA SPSR;	/* SPI Status Register */
sfr at 0x96 WMCON;	/* Watchdog and Memory Control Register */
sfr at 0xD5 SPCR;	/* SPI Control Register */

/*------------------------------------------------
SPSR (0xAA) Bit Values - Reset Value = 0000.0000
------------------------------------------------*/
#define WCOL_   0x40    /* SPI Write Collision Flag: 1=Collision */
#define SPIF_   0x80    /* SPI Interrupt Flag */

/*------------------------------------------------
WMCON (0x96) Bit Values
------------------------------------------------*/
#define WDTEN_   0x01

#define WDTRST_  0x02   /* Watchdog Timer Reset and EEPROM Ready,/Busy Flag*/
#define EERDY_   0x02   /* Watchdog Timer Reset and EEPROM Ready,/Busy Flag */

#define DPS_     0x04   /* Data Pointer Select: 0=DP0, 1=DP1 */
#define EEMEN_   0x08   /* Internal EEPROM Access Enable: 1=Enabled */
#define EEMWE_   0x10   /* Internal EEPROM Write Enable: 1=Enabled */
#define PS0_     0x20   /* Prescaler bit 0 for the Watchdog Timer */
#define PS1_     0x40   /* Prescaler bit 1 for the Watchdog Timer */
#define PS2_     0x80   /* Prescaler bit 2 for the Watchdog Timer */
                        /* 000 =   16ms Timeout */
                        /* 001 =   32ms Timeout */
                        /* 010 =   64ms Timeout */
                        /* 011 =  128ms Timeout */
                        /* 100 =  256ms Timeout */
                        /* 101 =  512ms Timeout */
                        /* 110 = 1024ms Timeout */
                        /* 111 = 2048ms Timeout */

/*------------------------------------------------
SPCR (0xD5) Bit Values - Reset Value = 0000.01XX
------------------------------------------------*/
#define SPR0_   0x01    /* SPI Clock Rate Select bit 0 */
#define SPR1_   0x02    /* SPI Clock Rate Select bit 1 */
                        /* 00 = Fosc / 4   */
                        /* 01 = Fosc / 16  */
                        /* 10 = Fosc / 64  */
                        /* 11 = Fosc / 128 */

#define CPHA_   0x04    /* SPI Clock Phase */
#define CPOL_   0x08    /* SPI Clock Polarity */
#define MSTR_   0x10    /* SPI Master/Slave Select: 0=Slave, 1=Master */
#define DORD_   0x20    /* SPI Data Order: 0=MSB First, 1=LSB First */
#define SPE_    0x40    /* SPI Enable: 0=Disabled, 1=Enabled */
#define SPIE_   0x80    /* SPI Interrupt Enable: 0=Disabled, 1=Enabled */

#endif /*REG_AT89S53_H*/