artxdemo.plg

来自「Keil UV3中自带操作系统ARTX的应用例程」· PLG 代码 · 共 234 行
PLG
234 行
<html>
<body>
<pre>
<h1>礦ision3 Build Log</h1>
<h2>Project:</h2>
D:\LPCARMDEMO\ArtxDemo2\ArtxDemo.uv2
Project File Date:  05/06/2006

<h2>Output:</h2>
Build target 'Target 1'
compiling ArtxDemo.cpp...
compiling RTX_Config.c...
assembling IRQ_RTX.s...
assembling Startup.s...
Startup.s(559): warning: A1608W: MOV pc,<rn> instruction used, but BX <rn> is preferred
assembling SWI_RTX.s...
linking...
ArtxDemo.axf: Warning: L6306W: '~PRES8' section startup.o(RESET) should not use the address of 'REQ8' function os_def_interrupt.
FromELF: creating hex file...
"ArtxDemo.axf" - 0 Error(s), 2 Warning(s).
Build target 'Target 1'
compiling ArtxDemo.cpp...
compiling RTX_Config.c...
assembling IRQ_RTX.s...
assembling Startup.s...
Startup.s(559): warning: A1608W: MOV pc,<rn> instruction used, but BX <rn> is preferred
assembling SWI_RTX.s...
assembling SWI_Table.s...
linking...
ArtxDemo.axf: Warning: L6306W: '~PRES8' section startup.o(RESET) should not use the address of 'REQ8' function os_def_interrupt.
FromELF: creating hex file...
"ArtxDemo.axf" - 0 Error(s), 2 Warning(s).
Build target 'Target 1'
compiling ArtxDemo.cpp...
compiling RTX_Config.c...
assembling IRQ_RTX.s...
assembling Startup.s...
Startup.s(559): warning: A1608W: MOV pc,<rn> instruction used, but BX <rn> is preferred
assembling SWI_RTX.s...
assembling SWI_Table.s...
linking...
ArtxDemo.axf: Warning: L6306W: '~PRES8' section startup.o(RESET) should not use the address of 'REQ8' function os_def_interrupt.
FromELF: creating hex file...
"ArtxDemo.axf" - 0 Error(s), 2 Warning(s).
Build target 'Target 1'
compiling ArtxDemo.cpp...
compiling RTX_Config.c...
assembling IRQ_RTX.s...
assembling Startup.s...
Startup.s(559): warning: A1608W: MOV pc,<rn> instruction used, but BX <rn> is preferred
assembling SWI_RTX.s...
assembling SWI_Table.s...
linking...
ArtxDemo.axf: Error: L6200E: Symbol SWI_Count multiply defined (by swi_table.o and SWI_Table.o).
Target not created
Build target 'Target 1'
compiling ArtxDemo.cpp...
compiling RTX_Config.c...
assembling IRQ_RTX.s...
assembling Startup.s...
Startup.s(559): warning: A1608W: MOV pc,<rn> instruction used, but BX <rn> is preferred
assembling SWI_RTX.s...
assembling SWI_Table.s...
linking...
ArtxDemo.axf: Warning: L6306W: '~PRES8' section startup.o(RESET) should not use the address of 'REQ8' function os_def_interrupt.
FromELF: creating hex file...
"ArtxDemo.axf" - 0 Error(s), 2 Warning(s).
Build target 'Target 1'
compiling ArtxDemo.cpp...
compiling RTX_Config.c...
assembling IRQ_RTX.s...
assembling Startup.s...
Startup.s(559): warning: A1608W: MOV pc,<rn> instruction used, but BX <rn> is preferred
assembling SWI_RTX.s...
assembling SWI_Table.s...
linking...
ArtxDemo.axf: Warning: L6306W: '~PRES8' section startup.o(RESET) should not use the address of 'REQ8' function os_def_interrupt.
FromELF: creating hex file...
"ArtxDemo.axf" - 0 Error(s), 2 Warning(s).
Build target 'Target 1'
compiling ArtxDemo.cpp...
compiling RTX_Config.c...
assembling IRQ_RTX.s...
assembling Startup.s...
Startup.s(559): warning: A1608W: MOV pc,<rn> instruction used, but BX <rn> is preferred
assembling SWI_RTX.s...
SWI_RTX.s(96): error: A1401E: 
assembling SWI_Table.s...
Target not created
Build target 'Target 1'
compiling ArtxDemo.cpp...
compiling RTX_Config.c...
assembling IRQ_RTX.s...
assembling Startup.s...
Startup.s(559): warning: A1608W: MOV pc,<rn> instruction used, but BX <rn> is preferred
assembling SWI_RTX.s...
assembling SWI_Table.s...
linking...
ArtxDemo.axf: Warning: L6306W: '~PRES8' section startup.o(RESET) should not use the address of 'REQ8' function os_def_interrupt.
FromELF: creating hex file...
"ArtxDemo.axf" - 0 Error(s), 2 Warning(s).
Build target 'Target 1'
compiling ArtxDemo.cpp...
compiling RTX_Config.c...
assembling IRQ_RTX.s...
assembling Startup.s...
Startup.s(559): warning: A1608W: MOV pc,<rn> instruction used, but BX <rn> is preferred
assembling SWI_RTX.s...
assembling SWI_Table.s...
linking...
ArtxDemo.axf: Warning: L6306W: '~PRES8' section startup.o(RESET) should not use the address of 'REQ8' function os_def_interrupt.
FromELF: creating hex file...
"ArtxDemo.axf" - 0 Error(s), 2 Warning(s).
Build target 'Target 1'
compiling ArtxDemo.cpp...
compiling RTX_Config.c...
assembling IRQ_RTX.s...
assembling Startup.s...
Startup.s(559): warning: A1608W: MOV pc,<rn> instruction used, but BX <rn> is preferred
assembling SWI.s...
SWI.s(159): error: A1114E: Expected register relative expression
Target not created
Build target 'Target 1'
compiling ArtxDemo.cpp...
compiling RTX_Config.c...
assembling IRQ_RTX.s...
assembling Startup.s...
Startup.s(559): warning: A1608W: MOV pc,<rn> instruction used, but BX <rn> is preferred
assembling SWI.s...
SWI.s(159): error: A1114E: Expected register relative expression
Target not created
Build target 'Target 1'
compiling ArtxDemo.cpp...
compiling RTX_Config.c...
assembling IRQ_RTX.s...
assembling Startup.s...
Startup.s(559): warning: A1608W: MOV pc,<rn> instruction used, but BX <rn> is preferred
assembling SWI.s...
linking...
ArtxDemo.axf: Warning: L6306W: '~PRES8' section startup.o(RESET) should not use the address of 'REQ8' function os_def_interrupt.
FromELF: creating hex file...
"ArtxDemo.axf" - 0 Error(s), 2 Warning(s).
Build target 'Target 1'
compiling ArtxDemo.cpp...
compiling RTX_Config.c...
assembling IRQ_RTX.s...
assembling Startup.s...
Startup.s(559): warning: A1608W: MOV pc,<rn> instruction used, but BX <rn> is preferred
assembling SWI.s...
linking...
ArtxDemo.axf: Warning: L6306W: '~PRES8' section startup.o(RESET) should not use the address of 'REQ8' function os_def_interrupt.
FromELF: creating hex file...
"ArtxDemo.axf" - 0 Error(s), 2 Warning(s).
Build target 'Target 1'
compiling ArtxDemo.cpp...
compiling RTX_Config.c...
assembling IRQ_RTX.s...
assembling Startup.s...
Startup.s(559): warning: A1608W: MOV pc,<rn> instruction used, but BX <rn> is preferred
assembling SWI.s...
SWI.s(15): error: A1516E: Bad symbol 'Artx_SETUP', not defined or external
Target not created
Build target 'Target 1'
compiling ArtxDemo.cpp...
compiling RTX_Config.c...
assembling IRQ_RTX.s...
assembling Startup.s...
Startup.s(559): warning: A1608W: MOV pc,<rn> instruction used, but BX <rn> is preferred
assembling SWI.s...
linking...
ArtxDemo.axf: Warning: L6306W: '~PRES8' section startup.o(RESET) should not use the address of 'REQ8' function os_def_interrupt.
FromELF: creating hex file...
"ArtxDemo.axf" - 0 Error(s), 2 Warning(s).
Build target 'Target 1'
compiling ArtxDemo.cpp...
compiling RTX_Config.c...
assembling IRQ_RTX.s...
assembling Startup.s...
Startup.s(559): warning: A1608W: MOV pc,<rn> instruction used, but BX <rn> is preferred
assembling SWI_Table.s...
assembling SWI_RTX.s...
linking...
ArtxDemo.axf: Warning: L6306W: '~PRES8' section startup.o(RESET) should not use the address of 'REQ8' function os_def_interrupt.
FromELF: creating hex file...
"ArtxDemo.axf" - 0 Error(s), 2 Warning(s).
Build target 'Target 1'
compiling ArtxDemo.cpp...
compiling RTX_Config.c...
assembling IRQ_RTX.s...
assembling Startup.s...
Startup.s(559): warning: A1608W: MOV pc,<rn> instruction used, but BX <rn> is preferred
assembling SWI_Table.s...
assembling SWI_RTX.s...
linking...
ArtxDemo.axf: Warning: L6306W: '~PRES8' section startup.o(RESET) should not use the address of 'REQ8' function os_def_interrupt.
FromELF: creating hex file...
"ArtxDemo.axf" - 0 Error(s), 2 Warning(s).
Build target 'Target 1'
compiling ArtxDemo.cpp...
compiling RTX_Config.c...
assembling IRQ_RTX.s...
assembling Startup.s...
Startup.s(559): warning: A1608W: MOV pc,<rn> instruction used, but BX <rn> is preferred
assembling SWI_Table.s...
assembling SWI_RTX.s...
linking...
ArtxDemo.axf: Warning: L6306W: '~PRES8' section startup.o(RESET) should not use the address of 'REQ8' function os_def_interrupt.
FromELF: creating hex file...
"ArtxDemo.axf" - 0 Error(s), 2 Warning(s).
Build target 'Target 1'
compiling ArtxDemo.cpp...
compiling RTX_Config.c...
assembling IRQ_RTX.s...
assembling Startup.s...
Startup.s(559): warning: A1608W: MOV pc,<rn> instruction used, but BX <rn> is preferred
assembling SWI_Table.s...
assembling SWI_RTX.s...
linking...
ArtxDemo.axf: Warning: L6306W: '~PRES8' section startup.o(RESET) should not use the address of 'REQ8' function os_def_interrupt.
FromELF: creating hex file...
"ArtxDemo.axf" - 0 Error(s), 2 Warning(s).
Build target 'Target 1'
compiling ArtxDemo.cpp...
compiling RTX_Config.c...
assembling IRQ_RTX.s...
assembling Startup.s...
Startup.s(559): warning: A1608W: MOV pc,<rn> instruction used, but BX <rn> is preferred
assembling SWI_Table.s...
assembling SWI_RTX.s...
linking...
ArtxDemo.axf: Warning: L6306W: '~PRES8' section startup.o(RESET) should not use the address of 'REQ8' function os_def_interrupt.
FromELF: creating hex file...
"ArtxDemo.axf" - 0 Error(s), 2 Warning(s).
artxdemo.plg - 源码说明

本页面展示了「Keil UV3中自带操作系统ARTX的应用例程」中的 artxdemo.plg 源码文件，采用 PLG 编程语言编写，共 234 行代码。您可以在线阅读完整代码内容，也可以返回资源详情页下载完整源码包进行本地学习和开发。
虫虫开发者社区收录了大量与Keil相关的技术资源，包括源代码、技术文档、电路图等，是电子工程师和嵌入式开发者的专业学习平台。
⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?