ex.fit.qmsg

cpld系统 EWB Quartus2编译 电子综合设计试验箱程序

{ "Info" "IFYGR_FYGR_NO_REGS_IN_IOS_FOOTER" "" "Info: Finished processing fast register assignments" {  } {  } 0 0 "Finished processing fast register assignments" 0 0 "" 0 0}
{ "Extra Info" "IFSAC_FSAC_FINISH_LUT_PACKING" "00:00:00 " "Extra Info: Finished moving registers into LUTs: elapsed time is 00:00:00" {  } {  } 1 0 "Finished moving registers into LUTs: elapsed time is %1!s!" 1 0 "" 0 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Info: Finished register packing" {  } {  } 0 0 "Finished register packing" 0 0 "" 0 0}
{ "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement " "Info: Statistics of I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement" { { "Info" "IFSAC_FSAC_SINGLE_IOC_GROUP_STATISTICS" "14 unused 3.3V 0 14 0 " "Info: Number of I/O pins in group: 14 (unused VREF, 3.3V VCCIO, 0 input, 14 output, 0 bidirectional)" { { "Info" "IFSAC_FSAC_IO_STDS_IN_IOC_GROUP" "3.3-V LVTTL. " "Info: I/O standards used: 3.3-V LVTTL." {  } {  } 0 0 "I/O standards used: %1!s!" 0 0 "" 0 0}  } {  } 0 0 "Number of I/O pins in group: %1!d! (%2!s! VREF, %3!s! VCCIO, %4!d! input, %5!d! output, %6!d! bidirectional)" 0 0 "" 0 0}  } {  } 0 0 "Statistics of %1!s!" 0 0 "" 0 0}
{ "Info" "IFSAC_FSAC_IO_STATS_BEFORE_AFTER_PLACEMENT" "before " "Info: I/O bank details before I/O pin placement" { { "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O banks " "Info: Statistics of I/O banks" { { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "1 does not use 3.3V 23 13 " "Info: I/O bank number 1 does not use VREF pins and has 3.3V VCCIO pins. 23 total pin(s) used --  13 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0 "" 0 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "2 does not use 3.3V 19 21 " "Info: I/O bank number 2 does not use VREF pins and has 3.3V VCCIO pins. 19 total pin(s) used --  21 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0 "" 0 0}  } {  } 0 0 "Statistics of %1!s!" 0 0 "" 0 0}  } {  } 0 0 "I/O bank details %1!s! I/O pin placement" 0 0 "" 0 0}
{ "Info" "IFITCC_FITTER_PREPARATION_END" "00:00:00 " "Info: Fitter preparation operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter preparation operations ending: elapsed time is %1!s!" 0 0 "" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Info: Fitter placement preparation operations beginning" {  } {  } 0 0 "Fitter placement preparation operations beginning" 0 0 "" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Info: Fitter placement preparation operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Info: Fitter placement operations beginning" {  } {  } 0 0 "Fitter placement operations beginning" 0 0 "" 0 0}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Info: Fitter placement was successful" {  } {  } 0 0 "Fitter placement was successful" 0 0 "" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Info: Fitter placement operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "" 0 0}
{ "Info" "ITDB_FULL_ESTIMATED_DATA_PATH_RESULT" "7.754 ns register pin " "Info: Estimated most critical path is register to pin delay of 7.754 ns" { { "Info" "ITDB_NODE_DELAY" "IC(0.000 ns) + CELL(0.000 ns) 0.000 ns cnt\[27\] 1 REG LAB_X8_Y5 8 " "Info: 1: + IC(0.000 ns) + CELL(0.000 ns) = 0.000 ns; Loc. = LAB_X8_Y5; Fanout = 8; REG Node = 'cnt\[27\]'" {  } { { "c:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" "" { cnt[27] } "NODE_NAME" } } { "LED.vhd" "" { Text "G:/电子综合设计实验箱测试程序/电子综合设计实验箱测试程序/02_CPLD系统模块/LED.vhd" 33 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0 0} { "Info" "ITDB_NODE_DELAY" "IC(2.852 ns) + CELL(0.200 ns) 3.052 ns Mux12~25 2 COMB LAB_X4_Y6 1 " "Info: 2: + IC(2.852 ns) + CELL(0.200 ns) = 3.052 ns; Loc. = LAB_X4_Y6; Fanout = 1; COMB Node = 'Mux12~25'" {  } { { "c:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" "3.052 ns" { cnt[27] Mux12~25 } "NODE_NAME" } } { "LED.vhd" "" { Text "G:/电子综合设计实验箱测试程序/电子综合设计实验箱测试程序/02_CPLD系统模块/LED.vhd" 115 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0 0} { "Info" "ITDB_NODE_DELAY" "IC(2.380 ns) + CELL(2.322 ns) 7.754 ns led8\[1\] 3 PIN PIN_2 0 " "Info: 3: + IC(2.380 ns) + CELL(2.322 ns) = 7.754 ns; Loc. = PIN_2; Fanout = 0; PIN Node = 'led8\[1\]'" {  } { { "c:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" "4.702 ns" { Mux12~25 led8[1] } "NODE_NAME" } } { "LED.vhd" "" { Text "G:/电子综合设计实验箱测试程序/电子综合设计实验箱测试程序/02_CPLD系统模块/LED.vhd" 19 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0 0} { "Info" "ITDB_TOTAL_CELL_DELAY" "2.522 ns ( 32.53 % ) " "Info: Total cell delay = 2.522 ns ( 32.53 % )" {  } {  } 0 0 "Total cell delay = %1!s! %2!s!" 0 0 "" 0 0} { "Info" "ITDB_TOTAL_IC_DELAY" "5.232 ns ( 67.47 % ) " "Info: Total interconnect delay = 5.232 ns ( 67.47 % )" {  } {  } 0 0 "Total interconnect delay = %1!s! %2!s!" 0 0 "" 0 0}  } { { "c:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" "7.754 ns" { cnt[27] Mux12~25 led8[1] } "NODE_NAME" } }  } 0 0 "Estimated most critical path is %2!s! to %3!s! delay of %1!s!" 0 0 "" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Info: Fitter routing operations beginning" {  } {  } 0 0 "Fitter routing operations beginning" 0 0 "" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "3 " "Info: Average interconnect usage is 3% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "3 X0_Y0 X13_Y8 " "Info: Peak interconnect usage is 3% of the available device resources in the region that extends from location X0_Y0 to location X13_Y8" {  } {  } 0 0 "Peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "" 0 0}  } {  } 0 0 "Average interconnect usage is %1!d!%% of the available device resources" 0 0 "" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Info: Fitter routing operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "Info: The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Info: Optimizations that may affect the design's routability were skipped" {  } {  } 0 0 "Optimizations that may affect the design's routability were skipped" 0 0 "" 0 0} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Info: Optimizations that may affect the design's timing were skipped" {  } {  } 0 0 "Optimizations that may affect the design's timing were skipped" 0 0 "" 0 0}  } {  } 0 0 "The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." 0 0 "" 0 0}
{ "Warning" "WFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN" "2 " "Warning: Following 2 pins have nothing, GND, or VCC driving datain port -- changes to this connectivity may change fitting results" { { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "led8\[7\] GND " "Info: Pin led8\[7\] has GND driving its datain port" {  } { { "c:/altera/80/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/80/quartus/bin/pin_planner.ppl" { led8[7] } } } { "c:/altera/80/quartus/bin/Assignment Editor.qase" "" { Assignment "c:/altera/80/quartus/bin/Assignment Editor.qase" 1 { { 0 "led8\[7\]" } } } } { "LED.vhd" "" { Text "G:/电子综合设计实验箱测试程序/电子综合设计实验箱测试程序/02_CPLD系统模块/LED.vhd" 19 -1 0 } } { "c:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" "" { led8[7] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0 0} { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "seg\[7\] GND " "Info: Pin seg\[7\] has GND driving its datain port" {  } { { "c:/altera/80/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/80/quartus/bin/pin_planner.ppl" { seg[7] } } } { "c:/altera/80/quartus/bin/Assignment Editor.qase" "" { Assignment "c:/altera/80/quartus/bin/Assignment Editor.qase" 1 { { 0 "seg\[7\]" } } } } { "LED.vhd" "" { Text "G:/电子综合设计实验箱测试程序/电子综合设计实验箱测试程序/02_CPLD系统模块/LED.vhd" 19 -1 0 } } { "c:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" "" { seg[7] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0 "" 0 0}  } {  } 0 0 "Following %1!d! pins have nothing, GND, or VCC driving datain port -- changes to this connectivity may change fitting results" 0 0 "" 0 0}
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "G:/电子综合设计实验箱测试程序/电子综合设计实验箱测试程序/02_CPLD系统模块/ex.fit.smsg " "Info: Generated suppressed messages file G:/电子综合设计实验箱测试程序/电子综合设计实验箱测试程序/02_CPLD系统模块/ex.fit.smsg" {  } {  } 0 0 "Generated suppressed messages file %1!s!" 0 0 "" 0 0}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 2 s Quartus II " "Info: Quartus II Fitter was successful. 0 errors, 2 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "182 " "Info: Peak virtual memory: 182 megabytes" {  } {  } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "" 0 0} { "Info" "IQEXE_END_BANNER_TIME" "Tue Aug 26 11:36:36 2008 " "Info: Processing ended: Tue Aug 26 11:36:36 2008" {  } {  } 0 0 "Processing ended: %1!s!" 0 0 "" 0 0} { "Info" "IQEXE_ELAPSED_TIME" "00:00:03 " "Info: Elapsed time: 00:00:03" {  } {  } 0 0 "Elapsed time: %1!s!" 0 0 "" 0 0} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:02 " "Info: Total CPU time (on all processors): 00:00:02" {  } {  } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "" 0 0}  } {  } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "" 0 0}