board.h

VxWorks网络tNetTask任务演示源代码

/**********************************************************************
 chengjy@felab, copyright 2002-2004
 board.h
 采集板用户程序常数定义
 **********************************************************************/
#ifndef _BOARD_H
#define _BOARD_H

/*bootline在内存中的位置，与bsp相同*/
#define LOCAL_MEM_LOCAL_ADRS    0x0
#define BOOT_LINE_OFFSET      	  0x4200
#define BOOT_LINE_ADRS	 ((char *) (LOCAL_MEM_LOCAL_ADRS+BOOT_LINE_OFFSET))

/*~~~~~~~~~~~~~~~~~~~~板子标志结构~~~~~~~~~~~~~~~~~~~~*/
struct	BoardIndex
{
	char	swVersion;			/*软件版本号*/
	char	swDiscri[100];		/*软件描述*/
	char	localIP[16];			/*本地IP*/
	char	remoteIP[16];		/*控制端IP*/
	int 	localPort;			/*通讯端口号*/
};

#define LOCAL_PORT_CMD			2001		/*命令通道端口号*/

/*~~~~~~~~~~~~~~~~~~~~板子工作环境~~~~~~~~~~~~~~~~~~~~*/
struct BoardWorkEnv
{
	int		boardInit;		/*boardInit单个位用来表示初始化状态*/	
	char	autoBootFlag;	/*标志采集板是完成阶段还是调试阶段*/
	char	dmaAutoFlag;	/*定义采集板的dma是由硬件自动控制还是零槽软件控制*/
};

#define BOARD_UNINIT				0x00
#define BOARD_F9656_INITED 		0x01
#define BOARD_NET_INITED			0x02
#define BOARD_GENET_INITED			0x04
#define BOARD_FLASH_INITED			0x08
#define BOARD_SOFTPRAM_INITED		0x80
#define BOARD_INITED				0x9F

#define DMA_AUTO_DISABLE		0		/*软件控制*/
#define DMA_AUTO_ENABLE		1		/*硬件控制*/
#define DFT_DMA_AUTO			DMA_AUTO_ENABLE
#define USR_DMA_AUTO			DMA_AUTO_DISABLE


/*~~~~~~~~~~~~~网络命令通道缓冲队列~~~~~~~~~~~~~~*/
/*队列的单节结构*/
struct cmdSingle
{
	struct cmdSingle *pNext;
	unsigned char *pBuff;
};

/*定义队列添加的优先级*/
#define QUEUE_PRI_HIGH		1		/*队头*/
#define QUEUE_PRI_LOW		0		/*队尾*/

/*定义队列的个数，对于双缓冲队列，定义为2*/
#define QUEUE_NUM			2	/*必须是大于0的整数*/
#define QUEUE_INDEX_RECV	0
#define QUEUE_INDEX_SEND	1

/*定义返回状态*/
#define STATUS_NORMAL			0x00
#define STATUS_ERROR			0x01
#define STATUS_WARNING		0x02
#define STATUS_INVALID			0x03
#define STATUS_UNAVAILABLE		0x04
#define STATUS_DISABLE			0x05

/*本地的网络端口号*/
#define LOCAL_SERVER_PORT		2001		/*服务器端套接字的端口号*/

/*命令通道和数据通道的最大包长度*/
#define NET_MSG_MAX_SIZE		0x1000	/*4096bytes*/

/*服务器初始化情况*/
#define NET_INIT_LISTENSKT		0x01
#define NET_INIT_COMMUSKT		0x02
#define NET_INIT_NULL			0x00

/*定义网络关闭时是否要重新初始化*/
#define MODE_NET_DEFAULT			0	/*重新初始化*/
#define MODE_NET_REINIT			1	/*不再初始化*/

/*定义任务名*/
#define TNAME_NETRECV			"tNetRecv"
#define TNAME_NETEXPLAIN		"tNetExplain"
#define TNAME_NETSEND			"tNetSend"
#define TNAME_NETINIT			"tNetInit"
#define TNAME_NETCHECKLINK	"tNetCheckLink"  
#define TNAME_NETCLOSEALL		"tNetCloseAll"

/*用户任务堆栈大小*/
#define USER_STACK_SIZE		2000

/*taskSpawn使用的用户任务优先级*/
#define TPRI_NETRECV		114			
#define TPRI_NETEXPLAIN		116
#define TPRI_NETSEND		114
#define TPRI_NETCLOSEALL	110
#define TPRI_NETINIT		112
#define TPRI_NETCHECKLINK	110

#define LOG_NETMSG_HEAD	/*打印接收到的网络消息的前8BYTE*/
#undef LOG_NETMSG_HEAD

/*~~~~~~~~~~~~~~~~~~~FLASH 相关参数~~~~~~~~~~~~~~~~~~~~~*/

/*FLASH地址空间*/
#define FLASH_BASE_ADDR			((UINT)0xFF000000)		/*FLASH起始地址*/
#define FLASH_DATA_BLOCK_NUM		63						/*实际包含63块*/
#define FLASH_DATA_BLOCK_SIZE_W	 ((UINT)0x00008000)		/*单片容量,单位WORD*/
#define FLASH_DATA_CPU				1		/*vxWorks存放的block,main block0和8个para block空出*/
#define FLASH_DATA_BOOTLINE		30		/*bootline存放的block*/
 
/*FLASH操作参数*/
#define FLASH_VALUE					unsigned short					/*FLASH 位宽16bit*/

/*flash字序*/
#define FLASH_CHANGE_ORDER		/*由于笔者使用测试板的数据线接成bit0<->bit7,bit1<->bit6,因此定义此宏，用户可以使用undef或者直接注释掉此宏*/
 
#ifndef FLASH_CHANGE_ORDER		/*使用宏直接改变*/
 /*FLASH状态转换参数*/
#define FLASH_CC_RESERVED			((FLASH_VALUE)0x0000)
#define FLASH_CC_READ_ARRAY		((FLASH_VALUE)0x00FF)
#define FLASH_CC_PROGRAM_SETUP	((FLASH_VALUE)0x0040)
#define FLASH_CC_ALTERPROG_SETUP	((FLASH_VALUE)0x0010)
#define FLASH_CC_ERASE_SETUP		((FLASH_VALUE)0x0020)
#define FLASH_CC_ERASE_CONFIRM	((FLASH_VALUE)0x00D0)
#define FLASH_CC_RESUME			((FLASH_VALUE)0x00D0)
#define FLASH_CC_SUSPEND			((FLASH_VALUE)0x00B0)
#define FLASH_CC_READ_STATUS		((FLASH_VALUE)0x0070)
#define FLASH_CC_CLEAR_STATUS		((FLASH_VALUE)0x0050)
#define FLASH_CC_READ_IDENTIFY	((FLASH_VALUE)0x0090)
#define FLASH_CC_READ_QUERY		((FLASH_VALUE)0x0098)
#define FLASH_CC_CONFIG_SETUP		((FLASH_VALUE)0x0060)
#define FLASH_CC_CONFIG_CONFIRM	((FLASH_VALUE)0x00D0)

/*状态寄存器检测*/
#define FLASH_CC_SET_CHECK1		((FLASH_VALUE)0x0080)	/*program结束*/
#define FLASH_CC_SET_CHECK2		((FLASH_VALUE)0x001A)	/*program可能出错的位置*/
#define FLASH_CC_ERASE_CHECK1		((FLASH_VALUE)0x0080)	/*erase结束*/
#define FLASH_CC_ERASE_CHECK2		((FLASH_VALUE)0x0010)	/*erase可能出错的位置*/

/*FLASH芯片类型*/
#define FLASH_28F320C3_ID			((FLASH_VALUE)0x0089)	
#define FLASH_28F320C3_IDENT_T 	((FLASH_VALUE)0x88C4)
#define FLASH_28F320C3_IDENT_B 	((FLASH_VALUE)0x88C5)

#else	/*defined FLASH_CHANGE_ORDER,不使用宏，用于第二版*/

/*FLASH状态转换参数*/
#define FLASH_CC_RESERVED			((FLASH_VALUE)0x0000)
#define FLASH_CC_READ_ARRAY		((FLASH_VALUE)0xFF00)
#define FLASH_CC_PROGRAM_SETUP	((FLASH_VALUE)0x0200)
#define FLASH_CC_ALTERPROG_SETUP	((FLASH_VALUE)0x0800)
#define FLASH_CC_ERASE_SETUP		((FLASH_VALUE)0x0400)
#define FLASH_CC_ERASE_CONFIRM	((FLASH_VALUE)0x0B00)
#define FLASH_CC_RESUME			((FLASH_VALUE)0x0B00)
#define FLASH_CC_SUSPEND			((FLASH_VALUE)0x0D00)
#define FLASH_CC_READ_STATUS		((FLASH_VALUE)0x0E00)
#define FLASH_CC_CLEAR_STATUS		((FLASH_VALUE)0x0A00)
#define FLASH_CC_READ_IDENTIFY	((FLASH_VALUE)0x0900)
#define FLASH_CC_READ_QUERY		((FLASH_VALUE)0x1900)
#define FLASH_CC_CONFIG_SETUP		((FLASH_VALUE)0x0600)
#define FLASH_CC_CONFIG_CONFIRM	((FLASH_VALUE)0x0B00)

/*状态寄存器检测*/
#define FLASH_CC_SET_CHECK1		((FLASH_VALUE)0x0100)
#define FLASH_CC_SET_CHECK2		((FLASH_VALUE)0x5800)
#define FLASH_CC_ERASE_CHECK1		((FLASH_VALUE)0x0100)
#define FLASH_CC_ERASE_CHECK2		((FLASH_VALUE)0x0800)

/*FLASH芯片类型*/
#define FLASH_28F320C3_ID			((FLASH_VALUE)0x9100)
#define FLASH_28F320C3_IDENT_T 	((FLASH_VALUE)0x2311)
#define FLASH_28F320C3_IDENT_B 	((FLASH_VALUE)0xA311)
#endif	/*FLASH_CHANGE_ORDER*/

/*flash地址转换到cpu地址*/
#define FLASH2CPU_ADDR(flashAddr)	((FLASH_VALUE*)((UINT)(flashAddr)*8+FLASH_BASE_ADDR))

/*flash操作最长时间*/
#define FLASH_ERASE_BLOCK_TIME	5000		/*最多50000次*/

#endif	/*_BOARD_H*/