segled.fit

CPLD VHDL 数码管程序

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 12/11/2005 14:17:23      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "segled"
BEGIN

    DEVICE = "EPM7128SLC84-15";

    "clk"                          : INPUT_PIN  = 83     ;
    "dig1"                         : OUTPUT_PIN = 75     ; -- LC118
    "dig2"                         : OUTPUT_PIN = 76     ; -- LC120
    "dig3"                         : OUTPUT_PIN = 77     ; -- LC123
    "dig4"                         : OUTPUT_PIN = 79     ; -- LC125
    "dig5"                         : OUTPUT_PIN = 80     ; -- LC126
    "dig6"                         : OUTPUT_PIN = 81     ; -- LC128
    "seg1"                         : OUTPUT_PIN = 10     ; -- LC6
    "seg2"                         : OUTPUT_PIN = 11     ; -- LC5
    "seg3"                         : OUTPUT_PIN = 12     ; -- LC3
    "seg4"                         : OUTPUT_PIN = 9      ; -- LC8
    "seg5"                         : OUTPUT_PIN = 8      ; -- LC11
    "seg6"                         : OUTPUT_PIN = 6      ; -- LC13
    "seg7"                         : OUTPUT_PIN = 5      ; -- LC14
    "seg8"                         : OUTPUT_PIN = 4      ; -- LC16
    ":54"                          : LOCATION   = LC1    ;  -- dig_reg6
    ":55"                          : LOCATION   = LC2    ;  -- dig_reg5
    ":56"                          : LOCATION   = LC9    ;  -- dig_reg4
    ":57"                          : LOCATION   = LC4    ;  -- dig_reg3
    ":58"                          : LOCATION   = LC7    ;  -- dig_reg2
    ":59"                          : LOCATION   = LC116  ;  -- dig_reg1
    "~164~2"                       : LOCATION   = LC107  ; -- PIN 69
    "~165~2"                       : LOCATION   = LC124  ;
    "~165~3"                       : LOCATION   = LC119  ;
    "~166~2"                       : LOCATION   = LC117  ; -- PIN 74
    "~167~2"                       : LOCATION   = LC127  ;
    "~168~2"                       : LOCATION   = LC115  ; -- PIN 73
    "~169~2"                       : LOCATION   = LC114  ;
    "~169~3"                       : LOCATION   = LC113  ;
    "~170~1~fit~in1"               : LOCATION   = LC121  ;
    "~170~2"                       : LOCATION   = LC122  ;
    "~171~1"                       : LOCATION   = LC10   ;

END;

INTERNAL_INFO "segled"
BEGIN
	DEVICE = EPM7128SLC84-15;
	LC16    : LORAX = "G174R0,PA34R0C6,PA34R0C0";
	LC14    : LORAX = "G172R0,PA30R0C7,PA30R0C0";
	LC13    : LORAX = "G171R0,PA28R0C7,PA28R0C0";
	LC11    : LORAX = "G116R0,PA23R0C0,PA23R0C7";
	LC8     : LORAX = "G85R0,PA10R0C7,PA10R0C0";
	LC3     : LORAX = "G27R0,PA5R0C7,PA8R0C0";
	LC5     : LORAX = "G82R0,PA13R0C7";
	LC6     : LORAX = "G83R0";
	LC128   : LORAX = "G202R0";
	LC126   : LORAX = "G200R0";
	LC125   : LORAX = "G199R0";
	LC123   : LORAX = "G144R0";
	LC120   : LORAX = "G113R0";
	LC118   : LORAX = "G111R0";
	LC1     : LORAX = "G25R0,PA4R0C6,PA4R0C7,PA4R0C0";
	LC2     : LORAX = "G26R0,PA0R0C6,PA0R0C7,PA0R0C0";
	LC9     : LORAX = "G114R0,PA19R0C7,PA19R0C0";
	LC4     : LORAX = "G28R0,PA1R0C6,PA1R0C7,PA1R0C0";
	LC7     : LORAX = "G84R0,PA17R0C6,PA17R0C7,PA17R0C0";
	LC116   : LORAX = "G56R0,PA2R0C7,PA2R0C0";
	LC10    : LORAX = "G115R0,PA21R0C0";
	LC114   : LORAX = "G54R0,PA5R0C0";
	LC124   : LORAX = "G145R0,PA22R0C0";
	LC122   : LORAX = "G143R0,PA26R0C7";
	LC117   : LORAX = "G110R0,PA16R0C0";
	LC107   : LORAX = "G197R0,PA31R0C0";
	LC115   : LORAX = "G55R0,PA3R0C0";
	LC127   : LORAX = "G201R0,PA27R0C0";
	LC113   : LORAX = "G53R0,PA7R0C0";
	LC119   : LORAX = "G112R0,PA12R0C0";
	LC121   : LORAX = "G142R0,PA25R0C7,PA25R0C0";
END;