📄 organ.rpt

📁 CPLD VHDL 数码管程序
💻 RPT
📖 第 1 页 / 共 5 页
字号:
Device-Specific Information:                    d:\source\cpld\organ\organ.rpt
organ

** LOGIC CELL INTERCONNECTIONS **

Logic Array Block 'G':

                                         Logic cells placed in LAB 'G'
        +------------------------------- LC112 |lpm_add_sub:427|addcore:adder|addcore:adder1|cout_node
        | +----------------------------- LC100 |lpm_add_sub:427|addcore:adder|addcore:adder1|result_node4
        | | +--------------------------- LC101 |lpm_add_sub:427|addcore:adder|addcore:adder1|result_node5
        | | | +------------------------- LC103 |lpm_add_sub:427|addcore:adder|addcore:adder1|result_node6
        | | | | +----------------------- LC104 |lpm_add_sub:427|addcore:adder|addcore:adder1|result_node7
        | | | | | +--------------------- LC105 |lpm_add_sub:427|addcore:adder|addcore:adder2|result_node0
        | | | | | | +------------------- LC107 |lpm_add_sub:427|addcore:adder|addcore:adder2|result_node1
        | | | | | | | +----------------- LC108 |lpm_add_sub:427|addcore:adder|addcore:adder2|result_node2
        | | | | | | | | +--------------- LC106 |lpm_add_sub:427|addcore:adder|addcore:adder2|result_node3
        | | | | | | | | | +------------- LC111 ~227~1
        | | | | | | | | | | +----------- LC110 ~228~1
        | | | | | | | | | | | +--------- LC102 ~229~1
        | | | | | | | | | | | | +------- LC98 ~230~1
        | | | | | | | | | | | | | +----- LC97 ~239~1
        | | | | | | | | | | | | | | +--- LC99 ~247~1
        | | | | | | | | | | | | | | | +- LC109 ~396~1
        | | | | | | | | | | | | | | | | 
        | | | | | | | | | | | | | | | |   Other LABs fed by signals
        | | | | | | | | | | | | | | | |   that feed LAB 'G'
LC      | | | | | | | | | | | | | | | | | A B C D E F G H |     Logic cells that feed LAB 'G':
LC112-> - - - - - - - * * - - - - - - - | - - - - - - * - | <-- |lpm_add_sub:427|addcore:adder|addcore:adder1|cout_node
LC100-> - - - - - - - - - - - - - * - - | - - * - - - * - | <-- |lpm_add_sub:427|addcore:adder|addcore:adder1|result_node4

Pin
83   -> - - - - - - - - - - - - - - - - | - - - - - - - - | <-- clk
63   -> - - - - - - - - - * * * * * * * | - - - - - * * - | <-- keyin1
61   -> - - - - - - - - - * * * * * * * | - - - - - * * - | <-- keyin2
60   -> - - - - - - - - - * * * * * * * | - - - - - * * - | <-- keyin3
58   -> - - - - - - - - - * * * * * * * | - - - - - * * - | <-- keyin4
57   -> - - - - - - - - - * * * * * * * | - - - - - * * - | <-- keyin5
56   -> - - - - - - - - - * * * * * * * | - - - - - * * - | <-- keyin6
55   -> - - - - - - - - - * * * * * * * | - - - - - * * - | <-- keyin7
LC125-> - - - - - - - - - - * - - - - - | - - - - - - * * | <-- |lpm_add_sub:427|addcore:adder|addcore:adder0|result_node1
LC124-> - - - - - - - - - - - * - - - - | - - - - - - * * | <-- |lpm_add_sub:427|addcore:adder|addcore:adder0|result_node2
LC114-> - - - - - - - - - - - - * - - - | - - - - * - * - | <-- |lpm_add_sub:427|addcore:adder|addcore:adder0|result_node3
LC36 -> - - - - - - - - * - - - - - - - | - - - - - - * - | <-- count19
LC35 -> - - - - - - - * * - - - - - - - | - - - - - - * - | <-- count18
LC37 -> - - - - - - * * * - - - - - - - | - - - - - - * - | <-- count17
LC45 -> - - - - - * * * * - - - - - - - | - - - - - - * - | <-- count16
LC46 -> * - - - * * * - - - - - - - - - | - - - - - - * - | <-- count15
LC47 -> * - - * * * * - - - - - - - - - | - - - - - - * - | <-- count14
LC48 -> * - * * * * * - - - - - - - - - | - - - - - - * - | <-- count13
LC39 -> * * * * * * * - - - - - - - - - | - - - - - - * - | <-- count12
LC33 -> * * * * * * * - - - - - - - - - | - - - - - - * * | <-- count11
LC34 -> * * * * * * * - - - - - - - - - | - - - - - - * * | <-- count10
LC42 -> * * * * * * * - - - - - - - - - | - - - - - - * * | <-- count9
LC44 -> * * * * * * * - - - - - - - - - | - - - - - - * * | <-- count8
LC43 -> * * * * * * * - - - - - - - - - | - - - - - - * * | <-- count7
LC41 -> * * * * * * * - - - - - - - - - | - - - - - - * * | <-- count6
LC67 -> * * * * * * * - - - - - - - - - | - - - - - - * * | <-- count5
LC86 -> * * * * * * * - - - - - - - - - | - - - - - - * * | <-- count4
LC65 -> * * * * * * * - - - - - - - - - | - - - - - - * * | <-- count3
LC116-> * * * * * * * - - - - - - - - - | - - - - - - * * | <-- count2
LC115-> * * * * * * * - - - - - - - - - | - - - - - - * * | <-- count1
LC113-> * * * * * * * - - * - - - - - - | - - - - - - * * | <-- count0


* = The logic cell or pin is an input to the logic cell (or LAB) through the PIA.
- = The logic cell or pin is not an input to the logic cell (or LAB).


Device-Specific Information:                    d:\source\cpld\organ\organ.rpt
organ

** LOGIC CELL INTERCONNECTIONS **

Logic Array Block 'H':

                                     Logic cells placed in LAB 'H'
        +--------------------------- LC125 |lpm_add_sub:427|addcore:adder|addcore:adder0|result_node1
        | +------------------------- LC124 |lpm_add_sub:427|addcore:adder|addcore:adder0|result_node2
        | | +----------------------- LC114 |lpm_add_sub:427|addcore:adder|addcore:adder0|result_node3
        | | | +--------------------- LC126 |lpm_add_sub:427|addcore:adder|addcore:adder0|result_node4
        | | | | +------------------- LC117 |lpm_add_sub:427|addcore:adder|addcore:adder0|result_node5
        | | | | | +----------------- LC118 |lpm_add_sub:427|addcore:adder|addcore:adder0|result_node6
        | | | | | | +--------------- LC119 |lpm_add_sub:427|addcore:adder|addcore:adder0|result_node7
        | | | | | | | +------------- LC120 |lpm_add_sub:427|addcore:adder|addcore:adder1|result_node0
        | | | | | | | | +----------- LC121 |lpm_add_sub:427|addcore:adder|addcore:adder1|result_node1
        | | | | | | | | | +--------- LC122 |lpm_add_sub:427|addcore:adder|addcore:adder1|result_node2
        | | | | | | | | | | +------- LC123 |lpm_add_sub:427|addcore:adder|addcore:adder1|result_node3
        | | | | | | | | | | | +----- LC116 count2
        | | | | | | | | | | | | +--- LC115 count1
        | | | | | | | | | | | | | +- LC113 count0
        | | | | | | | | | | | | | | 
        | | | | | | | | | | | | | |   Other LABs fed by signals
        | | | | | | | | | | | | | |   that feed LAB 'H'
LC      | | | | | | | | | | | | | | | A B C D E F G H |     Logic cells that feed LAB 'H':
LC125-> - - - - - - - - - - - - * - | - - - - - - * * | <-- |lpm_add_sub:427|addcore:adder|addcore:adder0|result_node1
LC124-> - - - - - - - - - - - * - - | - - - - - - * * | <-- |lpm_add_sub:427|addcore:adder|addcore:adder0|result_node2
LC116-> - * * * * * * * * * * - - - | - - - - - - * * | <-- count2
LC115-> * * * * * * * * * * * - - - | - - - - - - * * | <-- count1
LC113-> * * * * * * * * * * * - - * | - - - - - - * * | <-- count0

Pin
83   -> - - - - - - - - - - - - - - | - - - - - - - - | <-- clk
LC50 -> - - - - - - - - - - - * * * | - - * - * * - * | <-- ~271~1
LC33 -> - - - - - - - - - - * - - - | - - - - - - * * | <-- count11
LC34 -> - - - - - - - - - * * - - - | - - - - - - * * | <-- count10
LC42 -> - - - - - - - - * * * - - - | - - - - - - * * | <-- count9
LC44 -> - - - - - - - * * * * - - - | - - - - - - * * | <-- count8
LC43 -> - - - - - - * * * * * - - - | - - - - - - * * | <-- count7
LC41 -> - - - - - * * * * * * - - - | - - - - - - * * | <-- count6
LC67 -> - - - - * * * * * * * - - - | - - - - - - * * | <-- count5
LC86 -> - - - * * * * * * * * - - - | - - - - - - * * | <-- count4
LC65 -> - - * * * * * * * * * - - - | - - - - - - * * | <-- count3


* = The logic cell or pin is an input to the logic cell (or LAB) through the PIA.
- = The logic cell or pin is not an input to the logic cell (or LAB).


Device-Specific Information:                    d:\source\cpld\organ\organ.rpt
organ

** EQUATIONS **

clk      : INPUT;
keyin1   : INPUT;
keyin2   : INPUT;
keyin3   : INPUT;
keyin4   : INPUT;
keyin5   : INPUT;
keyin6   : INPUT;
keyin7   : INPUT;

-- Node name is ':372' = 'count0' 
-- Equation name is 'count0', location is LC113, type is buried.
count0   = DFFE( _EQ001 $  GND, GLOBAL( clk),  VCC,  VCC,  VCC);
  _EQ001 = !count0 & !_LC050;

-- Node name is ':371' = 'count1' 
-- Equation name is 'count1', location is LC115, type is buried.
count1   = DFFE( _EQ002 $  GND, GLOBAL( clk),  VCC,  VCC,  VCC);
  _EQ002 = !_LC050 &  _LC125;

-- Node name is ':370' = 'count2' 
-- Equation name is 'count2', location is LC116, type is buried.
count2   = DFFE( _EQ003 $  GND, GLOBAL( clk),  VCC,  VCC,  VCC);
  _EQ003 = !_LC050 &  _LC124;

-- Node name is ':369' = 'count3' 
-- Equation name is 'count3', location is LC065, type is buried.
count3   = DFFE( _EQ004 $  GND, GLOBAL( clk),  VCC,  VCC,  VCC);
  _EQ004 = !_LC050 &  _LC114;

-- Node name is ':368' = 'count4' 
-- Equation name is 'count4', location is LC086, type is buried.
count4   = DFFE( _EQ005 $  GND, GLOBAL( clk),  VCC,  VCC,  VCC);
  _EQ005 = !_LC050 &  _LC126;

-- Node name is ':367' = 'count5' 
-- Equation name is 'count5', location is LC067, type is buried.
count5   = DFFE( _EQ006 $  GND, GLOBAL( clk),  VCC,  VCC,  VCC);
  _EQ006 = !_LC050 &  _LC117;

-- Node name is ':366' = 'count6' 
-- Equation name is 'count6', location is LC041, type is buried.
count6   = DFFE( _EQ007 $  GND, GLOBAL( clk),  VCC,  VCC,  VCC);
  _EQ007 = !_LC050 &  _LC118;

-- Node name is ':365' = 'count7' 
-- Equation name is 'count7', location is LC043, type is buried.
count7   = DFFE( _EQ008 $  GND, GLOBAL( clk),  VCC,  VCC,  VCC);
  _EQ008 = !_LC050 &  _LC119;

-- Node name is ':364' = 'count8' 
-- Equation name is 'count8', location is LC044, type is buried.
count8   = DFFE( _EQ009 $  GND, GLOBAL( clk),  VCC,  VCC,  VCC);
  _EQ009 = !_LC050 &  _LC120;

-- Node name is ':363' = 'count9' 
-- Equation name is 'count9', location is LC042, type is buried.
count9   = DFFE( _EQ010 $  GND, GLOBAL( clk),  VCC,  VCC,  VCC);
  _EQ010 = !_LC050 &  _LC121;

-- Node name is ':362' = 'count10' 
-- Equation name is 'count10', location is LC034, type is buried.
count10  = DFFE( _EQ011 $  GND, GLOBAL( clk),  VCC,  VCC,  VCC);
  _EQ011 = !_LC050 &  _LC122;

-- Node name is ':361' = 'count11' 
-- Equation name is 'count11', location is LC033, type is buried.
count11  = DFFE( _EQ012 $  GND, GLOBAL( clk),  VCC,  VCC,  VCC);
  _EQ012 = !_LC050 &  _LC123;

-- Node name is ':360' = 'count12' 
-- Equation name is 'count12', location is LC039, type is buried.
count12  = DFFE( _EQ013 $  GND, GLOBAL( clk),  VCC,  VCC,  VCC);
  _EQ013 = !_LC050 &  _LC100;

-- Node name is ':359' = 'count13' 
-- Equation name is 'count13', location is LC048, type is buried.
count13  = DFFE( _EQ014 $  GND, GLOBAL( clk),  VCC,  VCC,  VCC);
  _EQ014 = !_LC050 &  _LC101;

-- Node name is ':358' = 'count14' 
-- Equation name is 'count14', location is LC047, type is buried.
count14  = DFFE( _EQ015 $  GND, GLOBAL( clk),  VCC,  VCC,  VCC);
  _EQ015 = !_LC050 &  _LC103;

-- Node name is ':357' = 'count15' 
-- Equation name is 'count15', location is LC046, type is buried.
count15  = DFFE( _EQ016 $  GND, GLOBAL( clk),  VCC,  VCC,  VCC);
  _EQ016 = !_LC050 &  _LC104;

-- Node name is ':356' = 'count16' 
-- Equation name is 'count16', location is LC045, type is buried.
count16  = DFFE( _EQ017 $  GND, GLOBAL( clk),  VCC,  VCC,  VCC);
  _EQ017 = !_LC050 &  _LC105;

-- Node name is ':355' = 'count17' 
-- Equation name is 'count17', location is LC037, type is buried.
count17  = DFFE( _EQ018 $  GND, GLOBAL( clk),  VCC,  VCC,  VCC);
  _EQ018 = !_LC050 &  _LC107;

-- Node name is ':354' = 'count18' 
-- Equation name is 'count18', location is LC035, type is buried.
count18  = DFFE( _EQ019 $  GND, GLOBAL( clk),  VCC,  VCC,  VCC);
  _EQ019 = !_LC050 &  _LC108;

-- Node name is ':353' = 'count19' 
-- Equation name is 'count19', location is LC036, type is buried.
count19  = DFFE( _EQ020 $  GND, GLOBAL( clk),  VCC,  VCC,  VCC);
  _EQ020 = !_LC050 &  _LC106;

-- Node name is 'spk' = 'spk_reg' 
-- Equation name is 'spk', location is LC038, type is output.
 spk     = DFFE( _EQ021 $  GND, GLOBAL( clk),  VCC,  VCC,  VCC);
  _EQ021 = !_LC050 & !_LC109 &  spk
         #  _LC050 & !spk;

-- Node name is '|lpm_add_sub:427|addcore:adder|addcore:adder0|result_node1' from file "addcore.tdf" line 164, column 16
-- Equation name is '_LC125', type is buried 
_LC125   = LCELL(!count1 $ !count0);

-- Node name is '|lpm_add_sub:427|addcore:adder|addcore:adder0|result_node2' from file "addcore.tdf" line 164, column 16
-- Equation name is '_LC124', type is buried 
_LC124   = LCELL( count2 $  _EQ022);
  _EQ022 =  count0 &  count1;

-- Node name is '|lpm_add_sub:427|addcore:adder|addcore:adder0|result_node3' from file "addcore.tdf" line 164, column 16
-- Equation name is '_LC114', type is buried 
_LC114   = LCELL( count3 $  _EQ023);
  _EQ023 =  count0 &  count1 &  count2;

-- Node name is '|lpm_add_sub:427|addcore:adder|addcore:adder0|result_node4' from file "addcore.tdf" line 164, column 16
-- Equation name is '_LC126', type is buried 
_LC126   = LCELL( count4 $  _EQ024);
  _EQ024 =  count0 &  count1 &  count2 &  count3;

-- Node name is '|lpm_add_sub:427|addcore:adder|addcore:adder0|result_node5' from file "addcore.tdf" line 164, column 16
-- Equation name is '_LC117', type is buried 
_LC117   = LCELL( count5 $  _EQ025);
  _EQ025 =  count0 &  count1 &  count2 &  count3 &  count4;
⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -